Satellite Biss Keys KEYS 1.12.2012

Contents of the article

I change the ignition switch on my 99 ford 150 put in new one and truck won't start so I put in the old one and it still won't start push the fuel button and no start the anti thief light flashes how do I reset that thanks george

Do you

have the same problem

Yes

No

Thursday, January 12th, 2012 AT 10:02 PM

1 Reply

PASSIVE ANTI-THEFT SYSTEM JOB AID -1999 Ford Pickup F150 Page 1 of 5 ARTICLE BEGINNING PASSIVE ANTI-THEFT SYSTEM (PATS) SPECIFICATIONS Tips Click a link to view tip Question: P1260 QUICK need to get truck running now! Question: NO START/THEFT LIGHT ON Question: theft light Tech1 Tech1 Tech1 FORD SYSTEM (PATS) SPECIFICATIONS NOTE: PATS may not be present on alternative fuel (Bi-fuel, Natural Gas, etc) vehicles. To determine appropriate procedure, refer to Fig. 1. For procedures, NOTE: refer to PROGRAMMING PROCEDURES. NOTE: For PATS key type, refer to PATS KEY TYPES. Fig. 1: Ford System (PATS) Specifications Courtesy of FORD MOTOR CO. LINCOLN SYSTEM (PATS) SPECIFICATIONS NOTE: PATS may not be present on alternative fuel (Bi-fuel, Natural Gas, etc) vehicles. To determine appropriate procedure, refer to Fig. 2. For procedures, refer to PROGRAMMING PROCEDURES. NOTE: For PATS key type, refer to PATS KEY TYPES. NOTE: Fig. 2: Lincoln System (PATS) Specifications Courtesy of FORD MOTOR CO. MERCURY SYSTEM (PATS) SPECIFICATIONS NOTE: PATS may not be present on alternative fuel (Bi-fuel, Natural Gas, etc) vehicles. NOTE: To determine appropriate procedure, refer to Fig. 3. For procedures, refer to PROGRAMMING PROCEDURES. 1/12/2012 PASSIVE ANTI-THEFT SYSTEM JOB AID -1999 Ford Pickup F150 Page 2 of 5 NOTE: For PATS key type, refer to PATS KEY TYPES. Fig. 3: Mercury System (PATS) Specifications Courtesy of FORD MOTOR CO. PATS KEY TYPES Fig. 4: PATS Key Types Courtesy of FORD MOTOR CO. DIAGNOSTIC TROUBLE CODES Tips Click a link to view tip Question: Code B2139 Question: u1147/u1262 Question: intermittent no start code u1262 Tech1 Tech1 Tech1 DIAGNOSTIC TROUBLE CODE DESCRIPTIONS DTC B1213 Description Less than 2 (or 3 if equipped w/Valet key) keys programmed to the system. Transceiver internal antenna damaged. Replace transceiver. ECU is defective (EEPROM in PCM is not working - replace PCM). PATS related when stored in PCM only. Non-PATS Key or damaged key. Unprogrammed encoded ignition key detected (leave ignition on for 20 seconds before trying a programmed key, in Anti-Scan Mode). Partial detection of encoded ignition key. Transceiver signal not detected. Non-Volatile Memory (NVM) configuration failure - No PCM ID stored in PATS. PCM ID does not match between the PCM and PATS control (PATS/ICM/VIC/HEC/SCIL). Key program failure (defective key or transceiver). Communications issue, SCP (J1850), between PCM and PATS control (PATS/ICM/ VIC/HEC/SCIL). Communications issue, CAN (J2284), between PCM and PATS control (ICM). PCM disabled the vehicle because of a PATS concern. Retrieve DTCs from applicable PATS control function (PATS/ICM/VIC/HEC/SCIL). B1232/B2103 B1342 B1600 B1601 B1602 B1681 B2141 B2139/U2510 B2431 U1147/U1262 U1900/U0100 Or U2511/B2009 P1260 NON-PATS ISSUES Tips Click a link to view tip 1/12/2012 PASSIVE ANTI-THEFT SYSTEM JOB AID -1999 Ford Pickup F150 Page 3 of 5 Question: Cranks, no spark/inj pulse or fuel Question: no crank u1950 brain hurts Question: NO CRANK, NO GO, THEFT LIGHT FLASHING Question: EXPLORER WONT START SEC. LITE FLASHING Tech1 Tech1 Tech1 Tech1 The following are NOT Passive Anti-Theft System issues: : The "Service Engine Soon" light is illuminated. (Investigate PCM system). There is no communication with PCM: PCM will always communicate on the diagnostic link regardless of theft status. (Investigate PCM system). Engine stalls on road: Once the engine runs for one second, PATS CANNOT disable the engine. Running stalls are not PATS related issues. Remote Entry/Keyless Entry problems: PATS is completely separate from the Remote Entry/Keyless Entry systems. There is a no-crank problem on vehicles without PATS Starter disable. Check chart, on reverse side, for presence of Starter Interrupt. PATS Theft Indicator flashes every 2 seconds at Ignition OFF. This is normal operation for PATS to act as a visual theft deterrent. See PASSIVE ANTI-THEFT SYSTEM (PATS) SPECIFICATIONS for applicable system. PATS Theft Indicator stays on for 2 or 3 seconds (depending on system type) at Ignition RUN or START and then off: This is normal operation for PATS proveout on all vehicles except LS and Thunderbird. THINGS TO DO: Review Service Procedures and Technical Service Bulletins (TSBs) for latest information. Disconnect the diagnostic tool for 20 seconds before cycling ignition to OFF, ACC, or RUN. When replacing ignition keys, make sure the owner throws out ALL old keys. Disconnect battery cables when replacing PATS module, ICM, VIC, HEC, SCIL, PCM, or EEC. Look for fault codes in PATS. The PATS function will store fault codes when the PCM records a P1260. Be certain of the vehicle model year. Use only parts and keys specified for the appropriate model year. Check to make sure the issue is not with multiple PATS keys, small electronic devices that can be used to purchase gasoline, or other items on same key ring. Check to ensure vehicle does not have an aftermarket remote starter. Disable any Remote Starter equipment, especially anything nearby the PATS Transceiver. Ford FCSD Dealer installed Remote Starter systems are approved for use in Ford vehicles. Check to ensure vehicle does not have an aftermarket engine immobilizer. The Ford FCSD aftermarket remote entry system comes with a starter interrupt that should be disabled on PATS equipped vehicles. If the Alarm sounds when the ignition is turned to RUN or START, refer to the appropriate PERIMETER ALARM article. 1/12/2012 PASSIVE ANTI-THEFT SYSTEM JOB AID -1999 Ford Pickup F150 Page 4 of 5 THINGS NOT TO DO: Do not use aftermarket keys that are NOT Ford qualified. Do not reprogram keys unless a defective key or control function has been replaced. Reprogramming keys does not fix any known problem by itself. Do not perform more Security Access functions than required: Perform only the functions specified in the appropriate service information for this repair. Selection of extra functions may continue the no-crank condition. PROGRAMMING PROCEDURES NOTE: To determine appropriate procedure, refer to PASSIVE ANTI-THEFT SYSTEM (PATS) SPECIFICATIONS. KEY PROGRAMMING USING DIAGNOSTIC TOOLS PROCEDURE #1 1 key required. Cycle key to RUN. Enter "Ignition Key Code Erase." Disconnect Tool and leave key in RUN for 20 seconds. Cycle key to OFF and then RUN. PROCEDURE #2 2 keys required. Cycle key 1 to RUN. Enter Security Access on the PATS control function module. Select "Ignition Key Code Erase." Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. PROCEDURE #3 2 keys required. Cycle key 1 to RUN. Select "Ignition Key Code Erase." Disconnect Tool and leave key in RUN for 20 seconds. Cycle key 1 to OFF, then RUN, and back to OFF. Cycle key 2 to RUN. SPARE KEY PROGRAMMING USING DIAGNOSTIC TOOLS PROCEDURE #4 Cycle an unprogrammed key in ignition to RUN. Enter Security Access on the PATS control function module. Select "Ignition Key Code Program." Disconnect Tool and leave key in RUN for 20 seconds. SPARE KEY PROGRAMMING USING PROGRAMMED KEYS PROCEDURE #5 1/12/2012 PASSIVE ANTI-THEFT SYSTEM JOB AID -1999 Ford Pickup F150 Page 5 of 5 1 key required. Cycle key 1 to RUN, then OFF. Cycle new key to RUN. PROCEDURE #6 2 keys required. Cycle key 1 to RUN, then OFF. Cycle key 2 to RUN, then OFF. Cycle new key to RUN. REPLACING PATS CONTROL MODULE OR PCM PROCEDURE #7 Tips Click a link to view tip Question: Re-programming Key w/o Ford Tool Tech1 Cycle a key in ignition to RUN. Enter Security Access on the PATS control function module. Select "Parameter Reset" and then Exit Security Access. Perform a PCM Keep Alive Memory (KAM). PROCEDURE #8 Cycle a key in the ignition to RUN. Enter Security Access on the PATS control function module. Select "ICM/PCM Parameter Reset." Select "PCM/TCM Parameter Reset" and then Exit Security Access (type F).

1/12/2012

Yes

No

-1

Friday, January 13th, 2012 AT 12:33 AM

Please login or register to post a reply BandiZip 3 01 Portable

Michael Jordan Nissan - Durham NC - Yelp

There are some situations which can't really be covered by a list of FAQs, but arise from time to time. To help users we will document some more in-depth issues here.

If you want to run the application on multiple machines, you should use the same settings for the inbox and outbox, and it's desirable to set the appdata path for the following reasons:

This way the logs will be shared amongst all users of the application. To do this follow the instructions below.

If it is not possible or practical to share the inbox and outbox between machines, you can install the application and import the same access keys on all systems. However this way the logs will not be shared, and files received by one computer will not be available for any others.

On the other hand, if you need the logs to be shared as well please follow the instructions here.

This means that the application can not write to the user's profile, or the profiles get wiped every time the user logs off.

There is an option in the installer for setting a custom path, but there appear to be problems in certain environments. To set it manually, follow the following instructions.

Note that these instructions also cover the case where you want multiple machines to access the application with shared logs/keys. If this doesn't apply to you disregard the pieces referring to multiple machines.

Creating a shared folder

In a location that you know both machines that the application is installed on has access to you must create a new folder to contain the application data. It may be wise for this to be in the same area as your inbox, outbox and archive. Perhaps create a new folder alongside these called 'appdata'. You must ensure that both users who will be using the application have both read and write access to this folder. This may require some assistance from your IT staff.

Copying existing logs and other data to the new shared folder

You will only be able to keep the existing logs from one of the machines that the application is installed on. Choose which machine this will be and on it do the following:

  • press and hold the windows key on your keyboard and press R, the Run dialog box should appear.
  • into the textbox type "%APPDATA%\A2C Migration Application" and click 'OK', a folder should appear containing 4 or 5 files.
  • Select all of these files, right click on them and click 'Copy'
  • Now open the folder that you created in the 'Creating a shared folder' step above.
  • Right click within the new folder and click 'Paste', the files (log.db, SavedCerts, etc.) should now be copied into this shared folder.
  • Updating the applications to use the new shared folder

    The following steps must be carried out on the application on both machines:

    • Open the folder that you have installed the application to, most likely: "C:\Program Files\A2C Migration Application".
    • In this folder you will find a file called "jcq.a2c.client.gui.exe.config", right click on this and open it in notepad
    • Within this file about half way down locate the following line:
      You must alter this line, adding a value for this key - this must be the path to the folder that you created above in 'Creating a shared folder' - so it should look something like (the double quotes around the value are important):

    • Save this file and close it.

    After you have completed this step you should be able to launch the application and your logs and other application data will be shared.

    I am afraid that the application does not provide an option for that itself. It can, however, be achieved by editing the jcq.a2c.client.gui.exe.config file in the installation directory. If you open the file in notepad and then add the following after the closing appsettings tag:

        

    replacing my-proxy with the DNS name or IP address of your proxy, and port with the port it uses (for example 3128, 8888, 8080 and so on).

    You can find more information on these settings here.

    If it's saying 'Invalid Access Key', it could be any number of things. It is most likely a permissions issue on the local machine. If you could look at the contents of "%APPDATA%\A2C Migration Application\Error.txt" - this contains the stack trace, which will be of System.Security.Cryptography.CryptographicException.

    The problem (most likely) is that it will say something along the lines of 'Access Denied':

    ------------------------- Error occurred at 1/12/2012 5:11:10 PM HRESULT: 80070005: System.Security.Cryptography.CryptographicException: Access is denied. at System.Security.Cryptography.CryptographicException.ThrowCryptogaphicException(Int32 hr)

    at System.Security.Cryptography.X509Certificates.X509Utils._LoadCertFromFile(String fileName, IntPtr password, UInt32 dwFlags, Boolean persistKeySet, SafeCertContextHandle pCertCtx)

    And so on.

    If it's a different error you get (instead of 'Access Denied') please let us know.

    The cause of this issue is, in order to support mandatory profiles we can't use the default key set (which will always fail with "The user is logged on with a temporary profile"). To fix it, make sure the users who need to run the application have full access to the machine key set.

    In Windows XP it is normally: C:\Documents and settings\All Users\Application Data\Microsoft\Crypto

    In windows vista and 7 it is normally: C:\ProgramData\Microsoft\Crypto

    The location is referred to by the %ALLUSERSPROFILE% environment variable Euro Truck Simulator 2

    A.O. Smith Round Flange 34 HP Up Rate Motor - UST1072 .

    Assuming that your date is an actual datetime column:

    SELECT MONTH(date), YEAR(date), id_publisher, COUNT(*)FROM raw_occurrence_recordGROUP BY MONTH(date), YEAR(date), id_publisher

    You can concatenate your month year like so:

    SELECT CONCAT(MONTH(date), '/', YEAR(date)) AS Month, id_publisher, COUNT(*)FROM raw_occurrence_recordGROUP BY MONTH(date), YEAR(date), id_publisher

    To find months where there are no records, you will need a date table. If you can't create one, you can UNION ALL a calendar table like so:

    SELECT a.year, a.month, b.id_publisher, COUNT(b.id_publisher) AS numFROM (SELECT 11 AS month, 2012 AS year UNION ALL SELECT 12, 2012 UNION ALL SELECT 1, 2013 UNION ALL SELECT 2, 2013) aLEFT JOIN raw_occurence_record b ON YEAR(b.date) = a.year AND MONTH(b.date) = a.monthGROUP BY a.year, a.month, b Cllean

    id_publisher

    See a demo

    KEYS [1.12.2012]

    Dejamos descanzar la guitarra virtual unos momentos para tocar el Piano Virtual Online con esta aplicación flash. En la Web hay varios pianos virtuales pero este resulta simple y completo ya que tiene 4 octavas.

    A la izquierda se activan las teclas del teclado (donde dice Activate Keyboard Control) y a la derecha (siempre hablando sobre el piano) donde esta el signo de pregunta se puede activar la opción que muestra que letra del teclado es cada nota.

    Debajo se encuentran los números 1 y 2, que ofrecen 2 sonidos, el piano normal y un teclado sintetizador.


    Dale Me gusta y aguarda unos segundos hasta que el Piano virtual se carga completamente.

    A continuación algunas canciones fáciles para piano compartidas por los usuarios. (no olvides activar el icono del teclado para que funcione).  


    La cucaracha: LLLET   LLLET   EEWWQQL   LLLWR   LLLWR   UIUYTRE



    Himno a la Alegria:  J K L L K J H G G H J J H        J K L L K J H G G H J H G  

    Para Elisa: (Sosteniendo shift) T / T / T / W E R Q D (las 2 últimas notas al mismo tiempo)  

    Tan solo tú (Franco de vita): L F J F G D L Shift 3 D H D F J L F J F G D L Shift 3 D H D F J F H Q (todos con su tiempo)  

    El bombón asesino :J J DJ LJ LJ JF JL JL W W J F F J Tenes alguna canción para indicarnos Si es así compártela en los comentarios :)  

    Tocar el piano Ya es posible aprender piano sin necesidad de tener que comprar uno ni buscar dónde estudiar. Si queres tocar el Riff de Humo Sobre el Agua Smoke On The Water de Deep Purple simulando ser Jon Lord seria asi:

       B 5 ,      B 5 6 ,    B 5 ,    5 B




    No dejes de mirar estos otros excelentes pianos virtuales:  

      Novedad! Ahora puedes jugar la versión del piano virtual grande! organo virtual


    piano online

    Teclado virtual

    En caso de que tu intención haya sido buscar descargar piano virtual te recomendamos ir a la pagina Softonic.com y colocar alguno de estos programas en su buscador interno:  



    Electronic Piano 2.5 es un piano virtual gratuito con el que puedes tocar 128 instrumentos MIDI

    Virtual Midi Piano Keyboard 0.4.0 es piano virtual midi y un generador y receptor de eventos MIDI, de modo que permite usar el teclado del piano virtual para mostrar notas tocadas desde otro instrumento (como un sintetizador) y reproducir archivos MIDI.  



    Virtual Piano 1.0 aplicación que se puede usar a modo de un piano virtual para todos tus dispositivos MIDI, sintetizadores y demás.  

    Baby Computer Piano es un sencillo piano virtual para tocar piezas musicales con el teclado del ordenador. Apto para los más pequeños.

    DSW Piano convierte el ordenador en un auténtica caja de música. Sólo necesitas un teclado con el que podrás tocar 128 instrumentos MIDI.

    HS Piano  incluye hasta 128 instrumentos, 12 efectos de sonido y 3 melodías con las que marcar tu ritmo. Para tocar las 36 notas sólo necesitas la ayuda de tu teclado.  

    MidiPiano/Drum Cuenta con 127 sonidos, entre instrumentos y efectos. Además, puedes grabar tus composiciones en formato MIDI para luego escucharlas NexusRadio

    Tambien te puede interesar:  

    afinador de guitarra online  

    bateria virtual metronomo online

    guitarra virtual

    canciones faciles para guitarra

    seguros para instrumentos


    Introducing the Sports Tracker Bluetooth Heart Rate Monitor

    Key features

    • Accurate real-time heart rate measurement
    • Extended connection range
    • Rechargeable
    • Comfortable premium quality textile strap
    • Android and Nokia Symbian compatible

    The brand new Sports Tracker Bluetooth Heart Rate Monitor is now available for pre-order. Designed, developed and tested in Finland by your very own Team Sports Tracker (with a lot of key input from Trackers from around the world) the Sports Tracker HRM is the perfect companion for your Sports Tracker Android or Nokia Symbian app.

    When developing the new Sports Tracker HRM one of the key things has been extending the connection range to make sure the belt and the sensor won’t lose connection to your phone no matter what you are up to.

    Another thing we wanted to have was to be able to recharge the sensor. No need to worry about the battery running out – just plug in the sensor to the USB charger and you can always be sure that you have enough juice for that important workout :)

    We are very proud of the results and hope that you will feel the same way!

    To celebrate the launch we’ve got a great pre-order offer lined up for all you trackers out there windows 8 loader 2013

    The monitor will start shipping in September and if you pre-order now you will get 10€ off free shipping to anywhere in the world!

    View Shop for the Boss RC-3 Loop Station and receive free shipping on your order and the guaranteed lowest price.,Dale Me gusta y aguarda unos segundos hasta que el Piano virtual se carga completamente. A continuacion algunas canciones faciles para piano compartidas por los .,merdarkandtwisty is a fanfiction author that has written 177 stories for Harry Potter, Life With Derek, Twilight, Gilmore Girls, One Tree Hill, Dawson's Creek, Pride .

    View Date Entered Last Name First Name MI Age City Warrant # Type Bond Fine; 5/14/2009: ACAHUA: JACOBO: TECPILE: 22: GALESVILLE: WI: 09CT338: M MISDEMEA : 6/9/2011: ADAMS .,Click any of the perversions below to list stories matching the tag. To narrow the list, click on additional tags to combine them. To start again, you can click here .,Welcome to Luby's Inc. We're known for our unique, family-friendly brands as well as our focus on delicious food and a fantastic experience. We're a community favorite.

    View Welcome to Luby's Inc. We're known for our unique, family-friendly brands as well as our focus on delicious food and a fantastic experience. We're a community favorite.,Dale Me gusta y aguarda unos segundos hasta que el Piano virtual se carga completamente. A continuacion algunas canciones faciles para piano compartidas por los .,BISS keys (Basic Interoperable Scrambling Systems), BISS key or Satellite Biss keys. Satellite Keys updated every day.

    Related articles

    Download Free Antivirus for Windows 2018 Avira Avira free antivirusA review of Avira Free Antivirus, an excellent choice among the many free antivirus software tools available.,Avira Free Antivirus combines good protection with a slew of optional extra features to protect your digital assets.,Das kostenlose Avira Free Antivirus schutzt den Rechner vor Viren, Spyware, Rootkits, Wurmern, Trojanern und Dialern.

    DisplayFusion Pro 8 Crack Serial Keygen Download DisplayFusion Pro SerialGet all latest Software crack, patch, serial key, license key, registration code, and windows activators.,DisplayFusion le hara la vida mas facil en el manejo de varios monitores, de manera mucho mas facil. Con potentes caracteristicas como multimonitor, barras de .,Hard Disk Sentinel Pro v4.71 e um programa simples de usar projetado para monitorar e analisar o estado do seu disco rigido. O aplicativo exibe dados detalhados .

    Sony Vegas Pro - Download Sony Vegas Pro 117/10 (286 votos) - Descargar Sony Vegas Pro para PC Ultima Version Gratis. Si quieres editar y combinar multiples pistas de video y obtener una pelicula con .,Sony Vegas Pro - мощный универсальный видеоредактор, который позволяет качественно и .,Free Download VEGAS Pro 15.0 Build 387 - Combines real-time SD, HD, 2K and 4K video editing with unrivaled audio tools to provide the ultimate all-i.

    << Go back to the previous page