Create Bootable Flash Drive to Install Windows XP from USB Install Windows Xp from USB using Multi Boot From USB

What article

How To Install Windows 7 And Windows 810 From Same USB Drive

RECOMMENDED: Click here to fix Windows errors and improve PC performance
 

Do you want to create a bootable USB drive containing Windows XP, Windows 7, Windows 8/8.1 and Windows 10 installation files to avoid creating multiple bootable USB drives Would you like to install Windows 7, Windows 8/8.1 and Windows 10 from the same USB drive If you said yes to above questions, you have come to the right place.

In this guide, we will show you how to create a bootable USB drive containing Windows XP, Windows 7, Windows 8 and Windows 10 installation files to install XP, 7, 8/8.1 and 10 from the same USB drive.

Things you need:

# Windows XP ISO file or DVD

# Windows 7 ISO file

# Windows 8/8.1 ISO file

# Windows 10 ISO

# 16 GB USB flash drive

Install Windows 10, Windows 8, Windows 7 and XP from same USB drive

Procedure:

Step 1: Connect your 16 GB USB flash drive to your PC and backup all data before proceeding further, as the drive will be erased while making it bootable.

Step 2: Head over to this page and download the newest version of WinSetupFromUSB zip file. Extract the zip file to get WinSetupFromUSB folder containing separate executable for x86 and x64 versions of Windows.

Step 3: Depending on the version of Windows you’re running, double-click either on WinSetupFromUSB.exe or WinSetupFromUSB x64 to launch the software.

Step 4: Once WinSetupFromUSB is launched and running, select your USB pen drive under USB disk selection and format tools section (see picture) and select Auto format it with FBinst option. Also select FAT32 as file system instead of NTFS if you want your multi-boot USB to be compatible with both BIOS and U/EFI.

Step 5: Skip this step if you don’t want to add Windows XP files to the USB. Select the check box under Windows 2000/XP/2003 Setup and then click the browse button to browse to the i386 folder in your Windows XP DVD or ISO file. Note that if you have the ISO file, you need to mount the ISO file using a third-party software or using the built-in Mount feature in Windows 8/8.1.

If you’re on Windows 7, we suggest you go through our how to mount an ISO file in Windows 7 guide for detailed instructions.

Once you have selected the I386 folder, proceed to the next step.

Step 6: Next, select the check box under Windows Vista/7/8/Server 2008/2012 based ISO, click on the browse button and browse to location where you have saved your Windows 7 ISO file. Select the ISO file and click Open button.

Step 7: Now that you have chosen to add Windows XP and Windows 7 to the USB drive and make it bootable, check the Advanced options box to open Advanced Options dialog, select the option titled Custom menu names for Vista/7/8/Server Source. This will enable you add your own custom names to your Windows 7 and Windows 8 setups in the boot menu.

Once done, close Advanced Options dialog.

Step 8: Finally, click GO button. Click on the Yes button when you see the Warning messages. If you have selected Custom menu names for Vista/7/8, you’ll see a small dialog box asking you to enter custom name for Windows setup. Enter a name and click OK button to allow WinSetupFromUSB begin its job.

NOTE: We’ll add Windows 8/8.1 to the USB in the next step.

Step 9: Once done, you’ll see Job done message on the screen. Don’t close WinSetupFromUSB yet as we have yet to add Windows 10 or 8 installation files to the USB. And if you don’t want to add Windows 8/10 files, you can stop the procedure here and close the application.

Step 10: In order to add Windows 8/10 installation files, select the option titled Windows Vista/7/8/Server 2008/2012 based ISO and then select your Windows 8/10 ISO file (make sure that the same USB drive is selected).

Step 11: Enable the option titled Advanced Options and then select Custom menu names for Vista/7/8/Server source.

Step 12: Finally, click the GO button. Click Yes button when you see warning dialogue boxes and enter a name for the setup when you’re asked to do so. That’s it! Your bootable USB containing Windows XP, Windows 7 and Windows 8/10 should be ready in a couple of minutes. Good luck!

Once done, you can connect the USB drive to your PC or any other PC on which you want to install Windows XP, Windows 7 or Windows 8/8.1, and then boot from the USB. You’ll see the following screen, where you need to select the Windows setup that you would like to start.

And if your PC doesn’t support booting from USB, please refer to our how to boot from USB even if your PC doesn’t support booting from USB guide Novicorp WinToFlash windows 7 windows xp

Update: Microsoft has created the Windows 7 USB/DVD Download tool to make this very easy.

I used this guide as a set of directions - http://kurtsh.spaces.live.com/blog/cns!DA410C7F7E038D!1665.entry

1. Get a USB Thumbdrive between 4-32GB.

If the drive is larger than 32GB, Windows cannot format it as FAT32, so an alternate utility must be used. Windows can still read FAT32 partitions larger than 32GB, though some devices cannot.

2. Run cmd.exe as administrator and enter the following commands followed by Enter

  1. diskpart
  2. list disk
  3. select disk # (where # is your USB drive as determined from step 2)
  4. clean (This step will delete all data on your flash drive!)
  5. create partition primary
  6. active
  7. format fs=fat32 quick
  8. assign
  9. list volume
  10. exit
  11. bootsect.exe /nt60 F: /mbr (where F: is the drive letter of your USB drive as reported by list volume)

3. Copy the Windows files from the ISO or other source using robocopy

robocopy.exe E:\ F:\ /MIR

where E:\ is the source and F:\ is the destination. Drag-and-drop or copy/paste can also be used, if you know what you're doing.

Configure your PC to boot from the USB drive

In some machines the USB thumbdrive will appear to the BIOS as any other hard drive. You need to muck with the boot sequence to place the thumbdrive higher in the boot order than the local hard drive.

Note that after you do this you might want to reset the boot order in order to ensure that BitLocker doesn't detect boot changes based on the fact that the thumdrive is missing if it was there when you encrypted your drive MAGIX Movie Edit Pro 2013 Premium

How to Create Bootable USB Drive of Windows Setup without .

As you know, a bootable USB drive comes handy in many situations such as re-installing Windows operating system or recovering from critical errors (like refreshing your PC, etc). There are several free tools available such as A Bootable USB, Rufus and Microsoft's official Windows 7 USB/DVD Download Tool to create bootable USB drive to install Windows as mentioned in following article:

Ultimate Collection of Best Freeware to Create Bootable USB Drive to Install Windows

But did you know you can create bootable USB drives of Windows setup without using any extra software Yes, you heard it right. By following a few simple steps, you can make your own bootable USB drive to install Windows OS without any 3rd party software.

This manual method requires only 3 steps:

  • STEP 1: Format USB drive (optional)
  • STEP 2: Mount or extract Windows setup ISO file
  • STEP 3: Copy Windows setup files to USB drive

Please note that this method can be used to create bootable USB drive of Windows Vista, Windows 7, Windows8/8.1 and Windows 10. This method doesn't work for Windows XP bootable USB drive.

So without any further delay let's start the tutorial:

STEP 1: Prepare USB Drive as Per Requirements

If you want to make Windows Vista or Windows 7 bootable USB drive, a 4GB USB drive will be sufficient. But, if you want to make a bootable drive of Windows 8, Windows 8.1 or Windows 10, you'll need an 8GB USB drive.

Now format the USB drive using FAT32 or NTFS file system. We recommend formatting the USB drive using NTFS file system for better compatibility with newer Windows versions.

To format USB drive, attach the drive to your computer system, open Windows Explorer, right-click on the USB drive icon and select Format option.

This step is optional. If you don't want to format your USB drive, you can skip this step but make sure there is enough free disk space on your USB drive to copy Windows setup files.

STEP 2: Mount or Extract Windows Setup ISO Image File

Now you'll need to extract all files from Windows setup ISO. You can extract the files using a file archive software such as 7-Zip, WinRAR, etc.

If you are using Windows 8 or later, you don't need to use any file archive utility, you can direct mount the ISO file as a virtual drive in Windows Explorer. You can do this by right-clicking on ISO image file and then selecting "Mount" option.

It will immediately mount the ISO file of Windows setup as a virtual DVD drive in Windows Explorer.

STEP 3: Copy Windows Setup Files to USB Drive

Now you just need to copy all files from extracted or mounted Windows ISO to your USB drive.

That's all. You have successfully made a bootable USB drive which can be used for all purposes as mentioned in the beginning of the tutorial.

About the author:

This is a guest post written by "Snehith A Shenoy" who is a B.Tech student at MIT India and a regular reader of AskVG.com.

Feel free to share your feedback about this tutorial and if you also have some tips-n-tricks to share, you can send us using contact page and we'll try to feature them at AskVG.

Advertisements

Share this article: Facebook | Twitter | Google | LinkedIn | Reddit

Posted in: Windows 10, Windows 7, Windows 8 / 8.1, Windows Vista, Windows XP

About the author: Vishal Gupta (also known as VG) has been awarded with Microsoft MVP (Most Valuable Professional) award. He has written several tech articles for popular newspapers and magazines and has also appeared in a few tech shows on TV channels crack windows 8

Other similar articles that may interest you


View Boot from USB / Boot anywhere: Boot from anywhere possible.,Since I’m preparing myself for the new Windows 7 and Windows Server 2008 R2 operating systems, I tend to download new builds fairly often and was looking .,I found two problems with the accepted answer: It assumes the usb drive is disk 1 for DISKPART. This can be resolved by using the LIST DISK command prior to SELECT .

View Quickly make a bootable UBCD. Ultimate Boot CD from USB,Boot from USB / Boot anywhere: Boot from anywhere possible.,(This is a long ~2900 words post, I recommend reading this from a tablet or computer) Windows XP is the second-longest supported operating system (OS) in Microsoft's .

View For the first year after the release of Windows 10, Microsoft offered free upgrades using the Get Windows 10 app, which appeared in the taskbar as a .,Windows 7: Boot Windows 7 System Repair Disc from USB Using Grub4Dos,I found two problems with the accepted answer: It assumes the usb drive is disk 1 for DISKPART. This can be resolved by using the LIST DISK command prior to SELECT .

Windows 10 32 64Bit Installation Multi Bootable USB .

If you’re like me at all you probably have more flash drives than you want to carry around, especially when they could all probably fit on one.  After my old 64GB flash drive took a dump I decided to purchase a new 64GB flash drive with USB 3.0 and compatibility for USB 2.0 and USB 1.1.  When I got the new flash drive I was determined to figure out a way to get rid of my bulky CD case and just carry this one drive around with me.  That means getting rid of all my Windows 7, Windows XP, Windows 8, Server 2003, Server 2008, Ubuntu 12.04, Linux Mint 13…I think you get the point.  The problem is there’s no real easy way to create a flash drive that can store all of these, and boot into any of your choosing, and still be functional under Windows when using it for troubleshooting or repairing workstations…until now.

Update (10/23/2013): Some users have reported that using USB 3.0 has caused issues when setting this up…for that reason I recommend using a flash drive that is USB 2.0 if you run into any issues.  I haven’t had a chance to look further into this, but once I have some free time (if ever) I will do some testing.

I spent a good couple days testing different software that could create “multiboot” flash/usb drives and ran into issues with almost all of them, but I was able to figure out a way to get what I needed without too much hassle.  I also took it a little bit further and customized my own boot screen and menu items.  I tested the following software:

  • Yumi Multiboot
  • MultiBoot USB
  • SARDU
  • XBoot
  • MultiSystem

All of those applications run on Windows besides MultiSystem which proved to only run correctly under Ubuntu (and not just any Debian flavor).

So, to start off and create the ultimate bootable USB drive you will need to download the Yumi Multiboot, Fat32 Formatter, and the MultiBoot USB (used to launch Qemu and test).  I found the Yumi Multiboot software was the best for installing the menus, ISO files, and for “general mangement” of the USB drive.  We will use the MultiBoot USB application to launch a Qemu instance and test the flash drive without having to reboot or use another computer.  The Fat32 Formatter is used to format the USB drive using a FAT32 parition instead of “exFat” or “NTFS”.   Unfortunately the only drawback to using Fat32 is the maximum file size of 4GB.  I only ran into a problem with this when I tried to use an ISO I made from a Dell Windows 7 with SP1 CD.  All my other CDs and ISO’s were 4GB or less so I just had to use a Dell Windows 7 ISO that didn’t have SP1 to stay under the 4GB limit.  If you try using exFat or NTFS you will run into problem, so don’t say i didn’t warn you.

Format USB/Flash Drive With Fat32

Fat32 Format GUI

So to start of you will first need to run the Fat32 Formatter to format the USB flash drive with a Fat32 Partition. Fat32 is the most compatible with all OS and ISOs but again there is a 4GB file limit size.  You can decide on whatever Allocation Unit Size you want but 32768 or 65536 should be fine for a 64GB drive.  The smaller the allocation size the slower the read/write speed as it will have to seek for each allocation unit size.  Because a 64GB drive really only shows about 58-63GB of space I decided to use 32768.  If you get any errors such as “Failed to open device – close any files before formatting” you will need to make sure you run the application as Administrator, and close anything that may be accessing the drive.  Under Windows 8 I actually had to open Task Manager and kill explorer in order to run the format.  After that just go to File -> Run New Task, and just enter “explorer.exe” and explorer will reload.

Start Creating or Downloading ISOs to Use

ImgBurn Create ISO

The next step to start on would be getting all your ISOs and CDs ready to transfer to the flash drive.  As I mentioned earlier one of my main intentions of creating this drive was so I could get rid of my bulky CD case I seemed to be carrying everywhere.  Using a software such as ImgBurn (free) you can create ISO files directly from CDs.  HowToGeek has a good tutorial on how to this here.  I saved all of these to a folder on my desktop named ISOs for easy organization.

Next you will want to start downloading any other ISOs you will need.  You can either download them directly from the website or Yumi has a great feature which will automatically start the download for you for some of the Distributions they have listed.  Go ahead and launch Yumi and select your flash drive, you will see a list of Distributions and a checkbox on the right that says “Download the iso (optional)” , select any distribution you want to include and click that checkbox.  Yumi will automatically launch the download and you can repeat this process to download all the ISOs you will want to include.

Start Installing ISOs and Installers/Distributions

Yumi Select an Unlisted ISO

Now comes the fun part, to start putting everything together.  Load up Yumi and select your flash drive.  To get the drive started the first thing I installed is the ISO I created from a Dell Windows XP CD.  Scroll down to “Windows XP Installer” listed in step 2 under distributions.  Next click on Browse under step 3 and select the ISO you created for your Windows XP ISO.  After that click next and Yumi will begin to install the Windows XP Installer along with Grub4Dos.  Yumi will use a combination of Grub4Dos and Syslinux for this custom boot.  After Yumi has installed the Windows XP Installer you can move on to adding additional Windows Installers.  Next we’re going to add Windows 7 installer, select Yes to add more after the Windows XP is complete or just reload the Yumi application.  Scroll down and select “Try an Unlisted ISO”, DO NOT SELECT Windows Vista/7/8 Installer, again DO NOT SELECT Windows Vista/7/8 Installer.

Yumi Multiboot Install Windows

If you choose that option instead of Try an Unlisted ISO, Yumi will install the Windows Vista/7/8 file to the root of the flash drive, and you DO NOT want that.  It will work just fine if you install it as an unlisted ISO.  So select Try an Unlisted ISO and then browse to your Windows ISO, then proceed with installation and you should see something similar to the image on the left.  As you can see Yum is installing Windows 7 to D:\multiboot\ISOS\WIN7_MSDN.iso, which is what we want instead of having Yumi install it to the root of the flash drive.   Continue to repeat this process for all the ISO files you want to install such as Windows and any other ISOs that are NOT listed in the Yumi list (Windows EXCLUDED).  ALWAYS INSTALL WINDOWS ISO BY SELECTING TRY AN UNLISTED ISO.

Test the Flash/USB Drive using Qemu

Multiboot USB Qemu

Now that you have all your ISOs installed that you want to use it’s time to fire up Qemu and test the drive out.  Once we have tested and made sure the drive is functional we will then proceed to customizing the boot menu descriptions, wording, and even background.  Load up the file I had to download from the beginning, Multiboot USB.  Select the “Qemu” tab, select the amount of RAM you want to use and then click “Boot USB”.  The screenshot has the text not looking correctly and that’s because under Windows 8 I set it to increase the size of everything so some applications that are not dynamic have issues like this, but that doesn’t have anything to do with functionality, it still works fine.  After you click Boot USB another window should open which will be a Qemu session that will attempt to boot the flash drive.  You should then see a screen with the Yumi background and a heading saying “Your Universal MultiBoot Installer”.  If you hit enter on “Directly Bootable ISOs or Windows XP” it should bring you to the Grub4Dos screen where you should see 3 options for Windows XP and then an option for each of the Windows ISOs and any other ISOs we added using “Try Unlisted ISO” … don’t worry about the wording we will customize that next.   Play around with it and make sure everything works, if you have problems try booting the flash drive on another computer to make sure it isn’t Qemu that is causing the problem.  Remember how to run Qemu like this as you will be using it frequently when changing around the wording and backgrounds.

Customizing Background

New Yumi Background

After testing our USB drive we are now ready to customize it to our preferences.  As you can see in the image on the left I found a background online by just searching under Google Images for “Windows Linux”.  If you find a background you want to use you will need to use Photoshop or some other software to resize the image.  The background MUST be 640×480, again the image MUST be 640×480.  To change the main background image you just need to replace the D:\multiboot\yumi.png file with your own background. That is assuming the D drive is your flash drive.  As you can see to the left I customized my background to have a Tux fly swatting a “Windows Bug” … possibilities are endless and i’m still trying to figure out a way to have this randomize a group of images.

Customizing Menus

Yumi syslinux.cfg

If you want to customize the menu that is pretty easy to do as well.  There are two menus, one for the main syslinux menu and one for the grub4dos menu.

The main menu (the first one you see) will be located at
D:\multiboot\syslinux.cfg
and will look like the image on the right.

Grub4Dos menu.lst

The second menu for grub4dos, where you can customize all the Windows and Unlisted ISOs will be located at
D:\multiboot\menu\menu.lst
and will look like the image below.

It should be pretty self explanatory, just modify the wording as you would like, save the file and voila!

Adding PortableApps to Flash/USB Drive

PortableApps Start Menu

Next step is to add PortableApps to the flash drive.  This is what I use when i’m not booting directly to the flash drive, and it gives you a “sort-of” start menu style interface for the flash drive.  You can then install all kinds of portable apps from their repository, or even add your own.  These apps will then be accessible from this “start menu” … this is where I normally add things such as virus scanners, malware scanners, networking tools, common software installers, etc.  PortableApps even creates a “Documents” folder like you would have under Windows where you can store pretty much anything.  By far the best usb app manager out there.

You can download PortableApps here:

http://portableapps.com/download

When you go to install PortableApps you should install it on the ROOT of your drive.  It will create two folders, “Documents” and “PortableApps”.  It will also create two files in the root, “Autorun.inf” and “Start.exe”.  The autorun.inf file specifies what file to run when the flash drive is plugged in, as well as the title of the flash drive.  Start.exe is the file that will run the PortableApps start menu.

Once you have this installed you have created the ultimate USB flash drive.  Congrats Forbidden Secrets Alien Town CE

Create UEFI Bootable USB Of Windows 10 - intowindows.com

If for some reason your notebook fails to boot and you need to access data on the hard drive (I assume there is nothing wrong with the hard drive itself), you can use an external USB enclosure. This method is very simple and could be very useful when you need an emergency access to your data on the hard drive.
First of all you’ll have to buy an external USB enclosure for notebook hard drives. These enclosures are inexpensive and usually you can buy them in any local computer store. You also can find a wide variety of external enclosures on the Internet. Make sure to buy a correct one, enclosures for ATA and SATA hard drives are different (the connector inside the case will be different). Usually the enclosure includes the case and the USB cables.

Now remove the hard drive from the laptop. For this example I’m using an ATA hard drive.

Open up the enclosure case and connect the hard drive to the connector inside. After that insert the hard drive into the case.

After everything is assembled, you are ready to connect this device to any working computer (notebook or PC). The enclosure cable usually has two USB connectors on one end, make sure both of them are connected to the computer. You don’t need any external power supply for the enclosure because the hard drive gets power through USB ports. If the computer you are connecting the enclosure to runs Windows 2000 or higher, you will not need any device drivers. As soon as you connect the enclosure to the computer, the external hard drive should be detected and recognized automatically. After that the external hard drive will appear in My Computer and you can access it as any other hard drive in the computer.

If you are getting “Access denied” message when you are trying to access your files on the hard drive, you’ll have to take ownership of a file or folder.

My previous post explains how to connect a notebook hard drive to a desktop PC via IDE hard drive adapter Talking Dictionary PRO

Related articles

TeamSpeak 3 скачать на русском языке бесплатно Team speak 3 and руссификаторСкачать Teamspeak бесплатно на русском. Популярная компьютерная программа ТимСпик выполняет .,Скачать Cheat Engine бесплатно. Cheat Engine 6.7 новая версия программы для успешного прохождения игр .,TeamSpeak: новые возможности интерактивного общения. Удобная и прогрессивная .

Download Bad Piggies PC Completo Torrent Gratis Bad Piggies 2012 PCGet the pigs from Angry Birds to the right place.The best free games from all over the internet just for you.,Special reports, videos, podcasts, research, white papers these are described below. Threat Scan: Threat Scans will,Мы хотели бы показать здесь описание, но сайт, который вы просматриваете, этого не позволяет.,Malwarebytes Anti-Malware Free Freeware - malware removal tool

<< Go back to the previous page