When the winter weather turns frightful, heated windshield wiper blades can make the difference between safe and unsafe driving. Prevent ice and snow buildup for better driving in winter weather with the industry leader in heated windshield wipers, Everblades®. Everblades® Heated Windshield Wipers feature a heated squeegee and also a heated frame for improved performance!
Everblades® Heated Windshield Wiper Blades are available to suit almost any type of vehicle, including cars, trucks, SUVs, RVs, and most school buses, commercial vehicles and heavy-duty trucks Treasure Hunters 2Our wiper blades are also easy to assemble and install, taking just 30 minutes!
Amazon.com: Blades of Time - Xbox 360: Video Games
The Minnesota Blades AAA Hockey Club is a non-profit youth hockey association that originated in 1989, initially as the Minnesota Stars. The founders, John Arko and Dennis Postregna, wanted to give talented Minnesota youth hockey players the opportunity, in the off-season, to travel outside the state and country to compete at the Tier I level --- experiences not normally available to Minnesota players during the regular season. They started with two select teams, playing hockey across Europe with 1976 and 1977 birth years players. Since then, the organization has grown to include boys and girls teams from Mites to Midgets, ages nine to nineteen. Funding for the Blades activities comes from parents, corporate sponsors, and the annual Blades-sponsored Spring AAA tournament, the Minnesota Super Series. Part of the Blades philosophy is that the best competition challenges players to be their best. The strength of this concept lies in the belief that highly skilled players, playing with others of similar skills, are able to learn more about teamwork and the game of hockey, because their coaches are teaching a team of players who can all execute and understand at the same level. Blades coaches stress skill and systems development, play making and teamwork. The tournaments that Blades teams participate in are selected based on the strength of the competition, the dates, and the location. To assess the success of the Blades program, check out the ever-expanding list of our alumni accomplishments.
Excellent coaching, highly-competitive tournaments, and international travel all serve to "stretch" Blades players' abilities and attitudes, building self esteem in a variety of areas. The tournament travel experience alone can be extraordinarily educational. Playing in a hockey tournament in Toronto, for instance, will still allow our young players time to visit the Hockey Hall of Fame, or to have lunch at Gretzky's restaurant. In Boston, they may have the opportunity to see a Red Sox game or visit the Harvard campus. Every aspect of the Blades schedule, from player selection to practices to competition, is designed to help the individual improve as a hockey player. Additional benefits include the expansion of life experience and the development of self-confidence, all while having fun with their friends!
- 04/25/2017, 11:15am CDT , By MN Blades
- Read More
- 04/25/2017, 11:00am CDT , By MN Blades
- Read More
- 02/01/2017, 11:30am CST , By MN Blades
- Read More
- 10/18/2016, 1:15pm CDT , By MN Blades
- Read More
- 10/18/2016, 1:15pm CDT , By By USAHockey.com
- Read More
- 09/12/2016, 12:30pm CDT , By USHL
- Read More
- 11/01/2014, 6:30pm CDT , By MN Blades
- Read More
- 10/02/2014, 9:45pm CDT , By Terrance Moore
- Read More
Support the Blades - Amazon Smile
Thank You MN Blades Sponsors!
PLEASE CONSIDER A COMPANY SPONSORSHIP OR INDIVIDUAL DONATION TO THE MN BLADES
The Blades have helped more than 350 Minnesota kids obtain Division I scholarships, and more than a quarter of these players have moved on to professional hockey. This is accomplished in three ways: 1) At the youth level, the Blades develop players through years of coaching and development; 2) At the high school level, the Blades help players gain national exposure by playing in the most highly scouted tournaments around North America; 3) Finally, at the older level, the Blades are able to use their vast contacts with Division I colleges/universities and USHL/NAHL scouts to promote their players to the next level.
Funding for the Blades activities comes from parents, corporate sponsors, and the annual Blades-sponsored Spring AAA tournament, the Minnesota Super Series. Now more than ever, as tournament fees and equipment costs rise, the Minnesota Blades are relying on sponsorships and donations to help ensure that participation in the Minnesota Blades remains affordable for all. Your generosity is appreciated and we thank you in advance for helping make the Minnesota Blades a continued success.
For additional information, please contact Jaime Fransway, Executive Director at 612-990-9355 or [email protected]
Visit our Facebook Page .... Click on Link Below. You can view share team news photos. If you "Like" the page, you will receive posts on your Facebook News Feed.
to donate support Jack and his future needs 4.31
The Minnesota Blades
RECENT GALLERY ENTRIESThu, Aug 2, 2018 New member of the BVFC family Wed, Jun 6, 2018 Concord Road Concord Pond Road Mon, Oct 2, 2017 Fire Prevention- Educational videos, How to call 911, Smokey the Bear, Stop..drop. Hitman Absolution PC SKIDROWand roll, Meet a fire fighter, Fire Truck ride and much more! Sat, Sep 30, 2017 BVFC provided Fire/EMS stand-by crew for Georgetown Screams at the Beach
Bearded Colonel - Subscription Razor Blades
Overall impressed with how smooth the action was for this knife. Love the button lock release. Beautiful stone washed finish and every edge rolled and smoothed except for the important once. My only slight disappointment was that it was not razor sharp out of the box like my benchmade and cold steels have been. Luckily I was able to put a razor edge on it myself, but I expected a sharper factory edge than what it came with.
Outstanding blade! Fits the hand perfect and is well balanced, opens and closes almost effortlessly. It shipped the same day it was ordered. I have numerous blades, this is my new edc, until I order the Harsey folder custom!
I needed a knife that would be a good fit for my weakening diabetic hands, and a lock that would be easier to use. After accepting that I am not able to use frame locks like I used too, and lock backs were even harder for me, I decided to try a this button lock. It works perfectly for my needs. The handle is big and thick enough to fit my hands and at the same time disappeared into my pocket. Fit and finish was flawless.
My knife came somewhat sharp, and a few minutes on my green compound strop was all it took to make it cut quite well. This looks like a hand sharpened edge which is very nice to see, and is equally ground on both sides from what I can tell...good job Spartan Blades, that makes it easy for me to touch up the blade for a long time before I have to use a stone.
I waited a couple of weeks to write this to see how I liked the knife after carrying it a bit. This is definitely a great hard use folder. It's extremely beefy and the lockup is as solid as I've ever seen. The blade shape is very practical for hard use applications, and the knife balances nicely in your hand. I will definitely be using this knife outdoors, and it makes a great EDC as well (in which role it alternates with my Akribis.) Overall I'm very satisfied, and this knife measures up to the high standards of everything I've seen from Spartan Blades. I would not hesitate to recommend it.
I've carried everything from ZT to Benchmade to Reeves and everything in between. The Pallas is my favorite EDC. From build quality to design, it's hard to beat.
Haven't had much use of the Pallas yet but can see it was well designed for carry. Good heft to it yet isn't too unnecessarily heavy. Appreciate all the features of the knife so far. Won't be my only Spartan Blade for sure.
Ran into another knife friend and he lays his new Pallus Button Lock on the table.....it just struck me as an excellent design....I decided I had to have my own.....the button lock works well in my hand....very smooth operation opening and closing....never mind how well it works....just the look of the knife is superb !!
The best folding knife I ever owned. Very sharp. Smooth workings.
I bought this knive to see if it is worthy of a Christmas gift for my two girls. When I get home from vacation I will order two more.
Amongst the ancient Greeks, Pallas (/ˈpæl əs/) was known as the Titan god of war. There couldn’t be a more fitting name for this knife. The Pallas’ beefy CPM S35VN steel blade was designed by master knifemaker Curtis Iovito, and is set in a 6061 aerospace aluminum frame on alpha bearings.
Unlike some folding knives, the Pallas Button-Lock Flipper can be opened with a simple flick of the thumb stud or flipper tab. This makes it easy to deploy the blade when you need it most. This blade isn’t just practical, though: it’s also durable. The handcrafted Pallas Flipper Folding Knife features all-stainless steel hardware, including screws, spacers, thumb studs, and button.
With the Pallas Flipper Custom Folding Knife, you’ll never have to worry about carrying it safely and securely. That’s because this knife features our signature titanium arrow clip, making it possible to carry the knife tip-up while it’s held securely in your pocket. Note: this knife is not an automatic opener.
You’d be hard pressed to find a better customer flipper folding knife out there than the Spartan Blades Pallas.
To learn more about the Pallas, take a look at this video!
Knife Name: PALLAS
Designer(s): Curtis Iovito
Blade Length: 3 3/4"
Overall Length: 8 3/4" (Open)
Blade Thickness: 0.153" or 5/32"
Blade Steel: CPM S35VN
Blade Hardness: 58-60 HRC
Blade Style: Drop Point
Frame: 6061 Aluminum
Clip Material: 6AL-4V Titanium
Finish: Stonewashed Blade Clip with a Black Mil Spec Anodized Frame
Weight: 4 file recovery 2736 OZ
Welcome to Tora Blades - Tora Blades
... to one of the most popular pages on my website. The knife starts with the blade, instantly recognized across time and cultures. People who visit here are looking for information, pictures, descriptions, details, and reason in a world full of hyperbole and schemes. Here you can read, in plain clear language, the details about knife blades and what I have learned from being a full time professional knife maker for several decades. Everything written here is my opinion, formed by making and selling literally thousands of knives for over thirty years to knife users, collectors, the military, law enforcement, chefs, hunters, guides, and industrial and specialty knife users. I guarantee that when you leave this page, you'll know more than most people about fine handmade and custom knife blades.
More about this Israeli Defense Force/National Police Force YAMAM Unit "Predator Ari B'Lilah" Counterterrorism Custom Knife Look, there are many good knife steels out there. When sites and discussions go on and on about steel types and properties, ad nauseam, they are often ignoring balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel property details! The steel is just the start of the knife, not the whole. If it were, every knife maker in the world would be out of business, not buried in orders and very expensive projects. When you see this type of site, ask to see their knives. That will tell you a lot! If you're on this page, you probably want to know more about knife blades. Be sure and look first at the FAQ page, because all the basic information and overview on knife blades, steel types, corrosion protection, sharpness, and uses is there. This page digs deeper into knife blade construction. After (or before) you read this page, if you want to delve into the technical side of blade steel please read my Heat Treating and Cryogenic Treatment of Knife Blades page. Please respect the copyright posted on every page! Hey, I know you're paraphrasing my work all over the web, and I'm honored! Don't forget where it came from!
Blades Page Topics
Click to jump to the knife blade topic
- Where did the knife blade come from
- What constitutes a knife blade
- How important is the handle
- How important is the shape of a knife blade
- Are blade shapes classified by use
- Aren't all knives about the same
- What about factory or manufactured knives
- Are all custom Knifemakers alike
- How does the buyer know the reputation of the knifemaker
- What are tool steels and why are they used
- Carbon Steel vs. Stainless Steels
- Does Chromium hurt or help the blade
- What about the latest new miracle steel I've heard so much about
- How do I pick a steel type
- What is a strong blade
- What about ultimate corrosion resistance
- What about edge retention
- What kind of steel are you "pushing"
- Why do you go on and on about steel types
- What are the steels you do use, don't use, and why
- What about damascus steels (It's all about the pretty)
- What about laminated or layered blades (Including "San Mai")
- What about special steel designations
- What about blade and steel testing (Cutting Tests)
- Sell the blade; the handle's crap!
- What is blade geometry, and why is it important
- What is the relief face angle, and how important is it to the cutting edge
- Grind geometry comparison
- Blade Grind Depth
- Grind geometry unrest!
- What about blade friction when cutting
- Which steel has the greatest "tooth" for the cutting edge
(and other carbide particle nonsense)
- The grind is more than the cutting edge!
- How sharp is sharp
- How do I sharpen the knife
- How do I sharpen the inside curve of a kukri or recurve blade
- What if I need more information on sharpening knives
- What about sharpening or honing using steels or point contact, V-type, or pinch type sharpeners
- What is stropping and why is it done
- What about heat treating
- Link to Heat Treating and Cryogenic Treatment of Knife Blades page
- What about hardness
- Just what is the Rockwell Hardness Scale, anyway
- General hardness table
- More about Toughness and Ductility
- What about differential hardness or differential temper
- What blade finish is best, and how can I tell
- Is there a non-scratch blade
- What about blued blades and coatings
- What about coatings like titanium nitride and others on the blade and edge
- Serrations, teeth
- Line Cutters, Gut Hooks
- Millwork, holes in blade
- What about tapered tangs
- Filework, edgework
- I didn't get my answer here.
More about this Tribal
I've seen your website and it is amazing. I've used a knife for the whole of my working life. To me they are a tool, like a wrench or a screwdriver. It's difficult to get good ones designed for what you need. They mostly let you down. I work with rope and must have a sharp knife. I also need a marlin spike to splice. I must carry both a sharp knife and a marlin to do the job. Marlins are hard to come by these days but a decent knife is almost impossible now. I was looking for a quality knife then I saw your website. I want to say that in a world where I thought that nobody cared about quality or craft anymore, you've proved me wrong. Thanks for doing so.
Yours Sincerely, M. B.
More about this Edesia
Homo sapiens has been around for about 100,000 years. Surprisingly, he was not the first knife maker. Evidence shows that the recently identified hominid species, Australopithecus garhi, was a tool and knife maker, deliberately selecting and modifying specific raw materials in a sophisticated and consistent way, and with careful intent. He was making double-edged knives about 2.5 million years ago. This technology gave its inventors an astonishing advantage - the ability to shift to an energy-rich, high-fat diet which led to all kinds of evolutionary consequences.
"Fossils of Australopithecus garhi are associated with some of the oldest known stone tools, along with animal bones that were cut and broken open with stone tools. It is possible, then, that this species was among the first to make the transition to stone toolmaking and to eating meat and bone marrow from large animals."
--Smithsonian National Museum of Natural History
Millions of years have passed since man first noticed that a sharp flake of obsidian, flint, or agate could cut. No one knows when the birth of the cutting edge took place; it is enough to understand that the knife was man’s first tool, predating modern man (Homo sapiens sapiens). No image, figure or shape would carve his destiny so profoundly, and even today every item and component of everything we touch, eat, wear, or drive has at one time been touched by a cutting edge. We humans, without fang or claw, will always require our essential edge, and are simply naked without it. We are a creature that cuts and shapes things: our food, our clothing, our shelters, our very environment and attitudes are based on our ability to create, and that ability's first and foremost tool is the cutting edge.
The origins of the word knife are from the Middle English (450-1150 A.D.) word knif and knyf, from the Anglo Saxon word cnif. Who knows what a knife was called before that The origin of the word blade is similar, in Middle English it was blad and blade, from the Anglo Saxon word blæd, which means a leaf.Back to Topics
More about these Mercury Magnums
In our modern definition, to cut means to penetrate with an edged instrument, divide or separate with an edged tool, shear, incise, or sever. So what is the common factor here It's the cutting edge. A knife is used to cut, rather than abrade. Sandpaper and grinding wheels abrade, though in a way, they cut; they use tiny cutting edges (when new and sharp) to rip away small particles of surface material. An axe blade uses a bit of cutting force and a lot of wedging to split away the grain of wood. A lathe tool or drill bit uses a heavy, thick cutting edge to displace and separate metal from metal (at high speed) as a cold chisel would. Probably the largest difference between the knife and all other cutting edges is the ability of a knife to have a very thin cutting edge, with the potential to apply a tremendous amount of force behind the edge with only the power of the human hand. Though many modern tools used in industry are called knives, this text only refers to those held in the human hand.Back to Topics
More about this Paraeagle
More about this Freedom's Promise
The shape of a knife blade, to a large extent determines the absolute use of the knife. Humans have made knives for millions of years. These are our most evolved and revered of tools. We've had millennia to define, refine, and perfect the knife blade, and yet there are thousands of designs. Why (See my own 450 designs here) Because, as simple as it would seem, a tiny variation in length, curvature, profile, thickness, and grind changes the knife completely. It's funny how just .030" of difference will make the knife blade look entirely distinctive. People notice this. I believe that man has made the knife for so long that it's possible that the pattern is somehow recognized on a genetic level. People relate to knives that way. Handles notwithstanding, I've seen clients stare and compare and tune and modify the pattern in the slightest way to reach that perfect shape that they think is just right. Where does that come from Have they really used knives that much to be able to distinguish miniscule differences in what is right for them There is something deeper here, something at the very core of the human psyche. That's another discussion for my book.
In a basic way, knife and blade use can be classified by shape. A long sweeping, curving blade is usually called skinning, or fleshing. A heavy, large aggressive-looking straight blade is usually called combat or tactical. I try to stay away from the term "fighting knife," as this is a negative and unrealistic designation for a modern knives.
Many knives are classified depending on the physical attributes of their profile, such as drop point, clip point, trailing point, and swage.
Here are some classifications of knives based on description of both use and blade shape:
Other blade shapes not shown by example are curved, razor, wharncliffe, square, kris, dirk, jambiya, stiletto, spey, smatchet, hawksbill, katar, and chakmak. There are a tremendous amount of variations in knife blades, and some of the blade styles incorporate the geometry of several different defined shapes. As the knife blade evolves, some new styles will undoubtedly be named, and the clear definitions of blade styles and shapes may be blurred or even discarded. For example, it would be ridiculous to describe a knife as a modified spear point with trailing point and tanto attributes with a recurve body and hollow ground swage... but I've done that! Ultimately, a photograph or illustration is necessary.
To learn much more about knife terms, anatomy, and knife related parts, please take a look at the best Knife Anatomy Page on the internet right here on this web site!Back to Topics
Knife blade shapes can also be classified by their use. This is a more casual affair, as most blade shapes can be used for a variety of cutting, slicing, or (in the case of combat knives) stabbing or ripping requirements. Some of the direct use classifications are: butchering, hunting, kitchen, chef's, culinary, caping, skinning, utility, combat, defense, CQC (Close Quarters Combat),assault, CQB (Close Quarters Battle), sport, camp, survival, CSAR (Combat Search and Rescue), counterterrorism, fantasy, sculptural, art, woodcraft, fillet, personal, bird, trout, ceremonial, carving, collector's, investment, museum, fine art, and simply working knives. There are many more: specialized descriptions, specialized uses, individual, dedicated knives, and knives that may cover several or many of the classifications listed.
Back to Topics
If all knives were the same, we'd only have one design, and you would see it everywhere. Instead, you'll see thousands of knife designs in the modern world. I make over 450 different designs myself. Imagine all the varied designs created throughout history, and you'll soon realize the tremendous variety of knives. There simply is no other tool or device that has so many variations and knives are astounding forms.
The person asking this might be wondering about comparisons between a handmade custom knife and a factory knife. Though this topic comes up infrequently, it is important to educate those who may try to form a realistic comparison of these two very different origins and fabrications of the same tool, art, or piece. This discussion is prevalent enough to deserve its own dedicated page on my site: Factory Knives vs. Handmade Custom Knives. Simply put:
Factory or manufactured knives depreciate from the moment of purchase.
Fine handmade custom knives from well-known makers appreciate from the moment of purchase.
Visit the page to find out why.Back to Topics
Hi Jay, not a ‘purchase enquiry’ just a few words to say I have never seen such beautiful hand made Craftsmanship knives! Found your Web Site on a knife search (I am in the UK) and when i saw the photos, I was to say the least, very impressed. Well done Jay, you are a true knife Craftsman.
Jim Rea FLS.
(Parks and Countryside Officer and Axe Collector)
More about this Artemis
Comparing factory knives to handmade custom knives is like comparing a hand-rolled Cuban cigar to a pack of cheap smokes.
A factory or manufactured knife can not compare to a handmade custom knife. Just because they share the same form, a blade and handle and sheath, it does not mean that they are in the same realm. Find out the difference between a knife that sells for a hundred bucks, and one that starts at 20 times that much on this special page dedicated to the topic.
In the specific and detailed subject of blades, the most important thing to remember is that factories need something to sell, something made cheaply but sold for as much as their market will bear. So for the blades, they often offer special steels that they claim are superior to the recognized AISI steels. They also are very careful not to reveal the steel alloy components or actual properties like tensile strengths, heat treating process, corrosion resistance, wear resistance and other factors and instead, claim things like, "testing has determined that our steel has superior performance, wear, and corrosion resistance than 440C, ATS-34, etc."
Don't be fooled by this hype. Any of these so-called tests are entirely subjective, and can be easily directed toward the intended result, which (shock) is always in favor of their special steel. Without revealing the exact components of the steel, there is no scientific way to test it. This is because testing, real scientific metallurgy must have as its basis the knowledge of the steel alloy components and method of manufacture as well as all the properties, mechanical and exposure, that the steel has or will be exposed to.
Let's make a simple, realistic comparison. A skyscraper is under construction. The head engineer of the ironworks company has read on the Mystical Bolt Company website that bolts are available, to assemble the structural steel columns, that they are a special and secret alloy and they perform better than known, recognized, and accepted industry standards. No technical specifications exist on the bolt maker's site: no alloy content, no process of manufacture, no tensile strength, impact strength, yield, elongation, area reduction at specific hardnesses and tempers depending on specific and varied heat treating and manufacturing processes is offered. On the bolt maker's site are just vague generalities about performance. Not one engineer on earth would sign off on the purchase of this fastener for the integrity of its properties and application on the project without knowing even what the material is.
Yet in the world of knife manufacture and sales, it's almost expected that the knife factory or boutique shop (small knife manufacturer) will supply some special, proprietary, or unique and mysterious steel that outperforms all other known types. Really It seems each factory follows the same advertising formula, claiming a special designation, comparing in generalities the qualities to known types, claiming superiority and thus value, sometimes adding performance anecdotes like chopping pine two-by-fours, shoving the blade in a car door, or bending, leaving submersed in water, or other ways of brutalizing a piece of overly thick steel. Then, to top it off, organizations and interests claim that certain knives must be certified (by them) for the honor of being tested in this anecdotal, subjective, and extremely unscientific way. Usually, this requires the donation of a knife or knives for this honor!
This is all advertising hyperbole, so that you will think that the inexpensive factory knife is somehow superior to other inexpensive factory knives. All the while, the knife lacks balance, has an unfinished blade, is poorly fitted, has cheap or non-durable handle materials, poorly made or non-existent fittings, no contouring or radiused forms, horrible fit, weak mechanical construction, lack of bedding, poor design, simply awful sheaths or accessories (or none at all), and no service, except for one or two companies who will sharpen your knife for a fistful of dollar bills. These knives will never be worth more than they are when they are purchased, never have any long-term value, are not custom, are not well made, and most individual knife makers create a product that is many times and many ways superior to factory or manufactured knives. But since the factory's business is built on volume, not quality, this doesn't matter.
Thankfully, the internet is changing all that. This very medium has been the source of real, valid information in not only the field of knives, but it all fields of interest and knowledge known to mankind. No matter where you live, you are very lucky that you are in a country that allows the technology and access that allows you to read this very sentence, and that you are living in an exciting time of the growth of knowledge and ultimately truth that the Internet can bring. You've just got to wade through the hype to get to it!
In my book, I'll go through just how significant and powerful this opportunity called the internet is, and how it's changing the way people do business, access products, learn, grow, and excel, deepen, and enrich their lives and the lives of their families with this tool of knowledge. I'll also detail how the vague, indiscriminate advertising hype that was started in print media that was limited to "pay by the letter" generalities has to face the reality of fact-based transparency. The practices of using power words and catch phrases is falling to the detailed and specific facts of product properties. But the factories don't get it yet, and maybe, because their products are cheap and made en masse, they never will.
Have you heard of this new thing called the internet It's giving people new expectations. It's allowing them to become their own expert. Knowledge lies anxious at their fingertips. Gloss over the truth in your advertising and you'll quickly be dismissed as a poser.
--Roy H. Williams
My point about steel types, blades, and hand knives is simple. There are known and listed steel types with known and listed mechanical and exposure properties. They are known and listed by real entities like the American Iron and Steel Institute (AISI), the Society for Automotive Engineers (SAE), and the American Society for Testing and Materials (ASTM). They are listed because they are established materials in industry, the military, and even the medical equipment fields. If there were a really special steel, something so great that it lived up to the advertising hype posted on these factory knife sites, wouldn't you see all other steels tossed aside and become obsolete while the new steel took over the military industrial commerce Of course you would. Established and well known steel types exist for a reason, and each reason varies in our world. There is no steel that dominates in all realms. A super hard steel may be brittle, a wear resistant steel may easily corrode. A lightweight material may be soft, a high wear resistance material may not be able to be finished or sharpened by hand. Every material has its pros and cons and I list those on this very page. You won't find factories listing any cons on any of their products, yet they do not supply a knife that is good enough to choke out the competition. Please think about that.There are many good knife steels out there. When factories and manufacturers go on and on about specialized steels only they offer, with vague properties and descriptions, they want you to ignore balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel generalizations! The steel is just the start of the knife, not the whole. If it were, every knife maker in the world would be out of business, not buried in orders and very expensive projects.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
Just found your website – New item on my bucket list – to one day have you create a knife for me! Beautiful knives, website and very informative; I just spent the last couple of hours (maybe it was more like 4 hours) reading some of the most straight forward and insightful knowledge on knives. My head is spinning !
Wow and wow – thanks for all of the hard work on creating your website and one day . . . a knife of yours will be mine!
More about Pacifica
Dear Jay I can truly say I have never seen such beautiful work before. I came on your page looking for knife cases and yes, I realize you don't make them. But I wanted to take a moment to say that you have an incredible sense of artistry. As a custom furniture builder, I have a bit of an appreciation for what you deal with - but you are way beyond anything I ever accomplished. I now am a manufacturer of mass produced outrigger pads and don't miss the hard times of building furniture. Anyway, great job, excellent work.
Of course not. They run the full range of quality from low to high. Some flat grind, some hollow grind, some stock remove, some forge, some assemble kits. It's best to educate yourself about knifemaking in general, but here are some points to look for:
- Is your knife maker well known and established Unlike factories who use a name from another time when they actually made a superb product, the knife maker must establish his name over decades of production. I'm not saying that a new maker does not make a fine knife; sometimes he does, it's just that longevity in this business is created one knife at a time, over decades. A beginning knife maker or craftsperson can work for a month and produce a pretty fine knife right out of the blue (or from a kit), but that is altogether different that a full-time custom knife maker who produces hundreds of knives, every one of them superior to most other handmade knives, year after year, for decades, and has the testimonials from professional knife users like the active duty military, police, professional chefs, professional hunting guides, and collectors to back it up. This is generally someone who knows knives, or he wouldn't be in business. His name is etched, stamped, or carved permanently into the steel, and every knife with his name on it carries his reputation.
- Does the maker serve professionals who use fine knives daily Does he make for professionals who trust their lives to his workmanship and product (like military in combat, police and SWAT teams, CSAR rescue teams, or counterterrorism teams) Has he done that for years Decades Can he prove that to you, show you his work, illustrate by commentary and testimonials Does he have an actual photographic archive of hundreds or thousands of his knives for proof Are his knives sought out by collectors for their own originality Do his knives increase in value over the years Is he charging more every year for his work If he does, and he has little inventory, it's a good bet that his knives appreciate dramatically.
- Look at the individual knife closely. Is it properly finished Does the blade have grind marks, sanding marks or waves (More about blade finish) Are there any visible gaps, scratches, bumps, waves, or rough spots in the handle (More about handles) What does the overall appearance of the knife suggest Is the blade size in balance with the handle Are there thin areas where the whole knife might be weak Did the maker fully taper the tang Is the filework or edgework accurate, balanced, and square Does the sheath match, and is it well made (More about sheaths) If you can, pick up the knife. Does it feel good in the hand Is it full, smooth, and solid Is it balanced, easy to manipulate, and comfortable Does it fit well and snug in the sheath A maker should have no problem with you handling his knives, in fact, he should encourage it! I've conveniently put handles on each and every one just for that purpose. If the knife can't be handled, a lot can be learned from the photo and here's a section detailing that.
- Here's an important technique: Hold the knife with the edge up, the point aimed right at the space between your eyes. Now cast one eye down one side of the blade, and the other eye down the other side of the blade. This may take some practice, but it's worth it. You'll get a clear picture of the grind lines, where the hollow grind (or flat) grinds meet the blade flats. These lines should match as closely as possible. By the way, looking at knife this way scares a lot of knifemakers, because they know you'll be able to see any irregularity, and it also shows that you know custom knives!
- Is it sharp Most people can lightly touch the thumb or finger to the cutting edge and tell. There should always be a wide-eyed amazement when this happens!
- What about the sheath, stand, case or display Knives do not stand alone! In the thousands of knives I've made over three decades, not one was ever delivered alone, that is, without a sheath, case, stand, block, or display component. Not one! Looking at this critical part of the knife will tell you loads about the skill, attention, and quality of the knife overall.
There are several ways to verify the knifemaker's reputation. Who does he make for He should have that right out front, for all to see. He should have no problem telling you who he makes for, what they use the knives for, what his current knives are valued at. Does he have a past history of shows, membership in professional knife organizations, or publications of his work Does he have a professional website or archive of his past works Where are his knives now Are any in museums, collections, or displays Can he give you any names of people who have used his knives and like them Can you see pictures of his knives
These sound like simple, obvious questions, but you would be surprised at how many clients are distracted, played, and conned by knifemakers. Here's an example: I attended a show once and my table was next to a female knifemaker, who immediately claimed to a prospective client that her family had thirty years of knife making experience. She was in her early twenties and laid claim to her family's experience as her own! Those years of experience were not apparent on the knives laying on her table, as they were big and blocky and badly finished and out of balance and ugly. Then, she gave the prospect some BS about the mystery of heat treating, how it was a special family secret handed down through generations. I bit my lip, knowing that heat treating is specifically described and prescribed by the manufacturer of the steel, that it is right up front in all engineering specifications for all knife steels, that it should be clear and simple to the client that the maker is treating the steel just as specifically as the manufacturer requests for the intended use. But the worst part is that she giggled and feigned interest in the client, smiling and flirting like a prostitute, which kept him looking at her more than the knife. The truth here is that some men are easily swayed by the attention of a young lady. He'll walk away with an overpriced hunk of junk, and the memory of a brief encounter with a con. Is it worth it I wonder how the line of BS would have gone down if his wife was standing beside him-
The moral here is look, look, look.... at the knife (and the sheath). The knife itself should be your focus of attention. Yes, you want to know the reputation of the maker, you want to know he's had years of experience and trustworthy clients. Still, take some time and examine the knives or the photographs very closely in front of you, they should speak for themselves. Listen to what the knifemaker says; does it make sense Can the knifemaker answer your questions with intelligence and dignity
That brings me to another professional aspect of the knifemaker: his appearance and attitude. Do you like buying from a loud-mouthed polyester prince used car salesman Are you comfortable with a cowboy all duded up with his best brushed felt range hat and high boots more suited to stomping through cow dung than presenting fine work How about that guy wearing a tee-shirt with rude graphics and holes in it and a goofy, grimy baseball cap Are these professionals that you would hand your hard earned trust over to The reason I include this topic is because every knife or craft show has this type of knife maker. So, does the knifemaker look, act, write, and present himself as a professional including here on the internet Now, don't get me wrong; if someone comes to my studio and shop, and they catch me with my full-face respirator and metal swarf-covered coveralls and work boots covered in wood and rock dust, I'm still a professional. But I wouldn't be caught dead at a knife show in that get-up. It's just not professional.
Simply, there is no miracle about making knives. Making knives is the oldest profession around. Yes, before even that one. Men have made knives for literally millions of years, for without a blade, early man would have starved. It is an honorable profession, if presented honorably. There is no great mystery, just practiced skill and determination. There are no mystical secrets to steel ingredients, to heat treating, to knife or blade shape, geometry, or materials. There is no enigma in the blade, no mystical materials; we don't quench in the blood of our enemies, there is no romance to the cutting edge, only artistic interpretation. No sword or crystal has magical powers, steel can't cleave stone, and a suitable dagger will not allow you to fly. Fine knives come from trained and practiced hands, not from a hidden tomb in a mountain. They are tools and sometimes works of art made by people like me who love to make them.
I take this business seriously; it is my full time professional job. I respect my clients and share their interest and love for knives.Back to Topics
More about this Mercurius Magnum
Yes, Virginia, there are specifically classified tool steels, and they are specifically used to make tools for the working and forming of woods, plastics, and other metals. This is the definition of tool steel (from the Machinist's Guide). They have to withstand high loads, abrasive contact, elevated temperatures, shock, stress, and adverse conditions without suffering major damage, edge dulling, or metallurgical changes.
Not all tools are made of tool steels! Tools used to cut wood, make hand saws for woods, ordinary hand tools, hammers, chisels, and files are often made from standard steels in the AISI/SAE/ASTM categories. The tool steel category is a separate group, and must absolutely be heat treated, hardened, and tempered. There are a large number of tool steels, with specific and controlled alloy compositions. Industry has created a specific classification systems for these tool steels in seven categories. They are:
- Water Hardening Tool Steels
- Mold Steels
- Shock Resisting Tool Steels
- Cold Work Tool Steels
- Hot Work Tool Steels
- High Speed Tool Steels
- Special Purpose Tool Steels
These categories are only the beginning of specific identification of tool steels and uses. Each category has sub-categories, and many steels cross over to a variety of uses. For instance, O-1 and D2, two of my favorite tool steels, are in the category of Cold Work Tool Steels. They are hardened by quenching in either oil or air, so the hardening method is not always the designator of the tool steel category. You might hear someone group metals as "oil-hardening" or "air hardening." These are NOT individual recognized categories, the specific seven categories are listed above. Hey, I didn't make this system up, it's the industry standard!
Stainless steels have a different classification system. It's unusual, because in AISI/SAE/ASTM, in order to classify as a stainless steel, they must contain at least 11.5% chromium. But the practice by some companies in the steel industry has been to claim steels with as little as 4% chromium as stainless steels! For aqueous corrosion resistance, 12% is required. Some steels, like D2, for instance, contain 12% chromium, but are actually in the category of Cold Work Tool Steels, not specifically limited to the stainless steel category, even though D2 is a stainless steel. Stainless steels are one of three types:
- Austenitic grades
- Ferritic grades
- Martensitic grades
In industrial standards (which we as machinists refer to) the term stainless steel refers to high-alloy steels which have superior corrosion resistance to conventional and carbon steels because they contain relatively large amounts of chromium (more than11.5%). In a broad sense, standard stainless steels fall into one of the three categories: (austenitic, ferritic, and martensitic).
Austenitic grades of stainless steels are non-magnetic in the annealed condition, but may become slightly magnetic after cold working. They can only be hardened by cold working, and do not harden in heat treat. A good example of austenitic stainless steel is 304 or 18-8, used for many stainless fasteners. I prefer 304 SS for many of my bolsters and fittings, as it is highly corrosion resistant, extremely tough, and requires no care. Please remember that the material I use in my bolsters is the same material as most stainless steel bolts, screws, and fasteners, built for strength, durability, and longevity.
Ferritic grades are always magnetic and contain chromium, but no nickel. They can be somewhat hardened by cold working, but not by heat treatment. They have moderate mechanical properties, high decorative appeal, and a narrower range of corrosion resistance. Some of the ferritic grades contain alloys that help prevent hardening. A good example is 405 stainless, which is often used because it can be easily welded and used in the as-welded condition, and is soft and ductile.
Martensitic grades of stainless steel are magnetic and can be hardened by heat treating, quenching, and tempering, forming martensite. They contain chromium and with several exceptions, no nickel. Many of the martensitic grades contain increased carbon content (above 0.8%, which makes them hypereutectoid) in the tool steel range, and are hardenable to the highest levels of all the stainless steels. Though they are not resistive to extremely corrosive atmospheres like concentrated chemicals, acids, and caustics, they have excellent service in most atmospheres and exposures. 440C, for instance, is used to make corrosion resistant ball bearings, high-wear valve parts, molds and dies, and of course, fine knife blades.
You'll see me referring to these grades in my description of knife steels and fittings I use in my own work.
Now if this is not confusing enough, here are the specific designations of steels (which are separate from the classification or the category). This is the standard, held by AISI (the American Iron and Steel Institute) and SAE (the Society of Automotive Engineers), and is the coordinated industry standard of steel designation:
- Carbon Steels
- Manganese Steels
- Nickel Steels
- Nickel-Chromium Steels
- Molybdenum Steels
- Chromium-Molybdenum Steels
- Nickel-Chromium-Molybdenum Steels
- Nickel-Molybdenum Steels
- Chromium Steels
- Chromium-Vanadium Steels
- Tungsten-Chromium Steels
- Silicon-Manganese Steels
- High Strength-Low Alloy Steels
- Chromium-Manganese-Nickel Steels
- Chromium-Nickel Steels
Okay, I hope that clears it up! Want to know more Pick up a copy of the hundred dollar book, the Machinery's Handbook© and the Study Guide at a bookstore or on line. There's more info in there on steel and other materials than you'll probably ever need!Back to Topics
More about this PJ
Mankind is now producing the finest tool steels ever created in history; why would you want anything less
Many of us older guys grew up with our fathers boasting about their carbon steel hunting and butcher knives and how they were so much better than the stainless steel blades. Unfortunately, this is one of the most prevalent and enduring misconceptions and wives' tales that persists in the modern world of knives.
There are two phases to this problem. First, in the early part of the 20th century, when stainless steels were at their infancy, the addition of chromium prevented full martensitic transformation, leaving lots of unstable retained austenite, which showed up a high wear and instability. It was only later that it was discovered that a sub-zero quenching of knife blade steels would give a fuller, more complete transformation into martensite, but the bad reputation of stainless steels had already been established. Even though the problem was gone, the myth of bad stainless steel persisted.
Second, low carbon Japanese stainless steel (420 stainless) was introduced into the world of cheap kitchen knives in the 1960s and 1970s. If you were alive then, you remember the ridiculous commercials showing the imported junk knives pounded through cinder blocks and then shaving off tomato slices. The common man ate up this drivel, and lots of money was made in the low-end kitchen knife market based on this hype. The truth is, this type of knife was made of cheap, springy, and thin low-carbon series stainless steels, which were tough, but not hard or wear-resistant. So when the edges did wear down, it was not reasonable to sharpen them, and they were left dull, but were still thin enough to be forced through foodstuffs and other cutting chores. The eternally dull knives ceased to perform, were not easily sharpened like the carbon steel knives, and the failure to understand sharpening of this different steel meant that the stainless knives were left dull. It followed then that people assumed that they couldn't be sharpened, so the steel was blamed. Most people then made a casual assumption that the stainless steel blades were of low value (the price was a good hint), and saved their most important cutting chores to high carbon, non-stainless steel butcher and hunting knives, because they were relatively easy to sharpen and they held a very keen edge a longer time than the imports.
The stainless steel is no good myth continued, and continues today, despite the fact that the majority of knives from cheap imports to fine collectors knives are made of stainless steel. Some people still long for the good old carbon steel knives from the past.
One of the world's most respected knife historians and experts writes:
"I have owned about 10,000 antique kitchen and butcher knives, and examined perhaps 20 times that number. I have found that good quality modern stainless steel knives, when properly sharpened, are superior in use to all older knives, even the very best. Stainless steel knives can be made at least as sharp as carbon steel ones, they stay sharp many times longer, and of course, they do not stain... the president of a major knife company put it very well when he said to me that preferring carbon steel knives over stainless steel ones is like preferring vacuum tube radios over transistor ones."
--Bernard Levine, Levine's Guide to Knives, 1985
Please look at the date of the above excerpt. Since the mid-eighties, there have been many new and improved stainless tool steels become available, so the old wife's tale is even more flawed. One of the problems does continue, however, and that is the infomercial that still claims cheap Asian imported knives are worth your hard-earned money. This myth of carbon steels extends into the handmade knife field, and bears examination.
Carbon Steels: Carbon steels, properly identified as Plain Carbon Steels by the AISI, SAE, ASME, NSI and ANSI are typically are identified by number. If the four digit number starts with 10, it is a plain carbon steel. Typically, in the knife trade and industry, 1025, 1075, 1080, and 1095 are often used. 1095 is about the best one can get for a plain carbon steel, as it has up to 1% carbon. It has manganese in it to increase forgeability, reduce brittleness, and improve hardenability, though the manganese does not itself improve hardness. No other notable alloy elements are included. These steels are usually chosen because they are inexpensive, usually about one fourth of the cost of stainless tool steels, and one tenth the cost of crucible particle metallurgy tool steels. These carbon steels are easy to work, are ductile and soft when annealed, and are gentle on tools and abrasives. Simply put, it is easy, cheap, and fast to make a knife from any of these steels. They have absolutely no corrosion resistance, and will quickly and easily rust and pit when left in the open air. They are easy to sharpen because they are not wear-resistant, and they frequently dull. In my experience, they are a bad steel for any knife. The only exception in my studio is when 1095 is married with nickel for nickel damascus in decorative blades. More about that below.
Another commonly seen type of knife steel used by makers and the knife industry is 5160. Though technically classified as a chromium steel, 5160 has very little chromium (.08% - 1.0%) and is not corrosion resistant in any way. The chromium is added to slightly improve the hardenability, but not enough is added to increase corrosion resistance or aid in the creation of an abundant amount of chromium carbides which can increase wear resistance. The chromium is limited because if added in significant quantities, the forging and critical temperatures of the steel would be raised enough to prevent hand-forging. Though this steel has better performance characteristics than the 10XX series, it is still not suitable for many knives, simply because it easily and readily rusts in the open air, and does not have high wear resistance. It is chosen mainly because it is a cheap steel, one fourth the cost of stainless high alloy tool steels, one tenth the cost of crucible particle metallurgy tool steels, and is easier to machine, cheaper to finish, and more forgiving to make a knife with.
Simply put, plain carbon steels are cheap steels, and have no place at the top of the line for extremely fine knives.
What are the advantages of the better high alloy tool steels There are many, and they are different. These modern, engineered, fine isotropic tool steels are created for the distinct application of creating tools and wear-resistant parts and cutting edges. They are the finest tool steels humanity has ever produced. In the application of blades for fine knives, there are some distinctive advantages, mainly high corrosion resistance, high wear resistance, high toughness, high tensile strength, and high finish value.
- The first advantage is corrosion resistance. There is no such thing as a tool steel that has infinite corrosion resistance, that is, a tool steel that will not corrode under any exposure. There are, however, great differences in modern tool steels that remarkably inhibit corrosion. Steels like 440C and CPMS30V are highly corrosion resistant, only showing slight discoloration in long and continuous exposure to acids like orange juice and vinegar and heavy salts after immersion for many hours. Since CPMS30V can not be mirror polished, the crown of corrosion resistance belongs to 440C. For the chef, working knife user, and tactician, this translates to low to no care, no corrosion, no dissolved metal, no smell or flavor imparted to the food, and an extremely durable knife that can be used for decades if not generations without pitting, rusting, staining, or dulling due to corrosion of the cutting edge as well as the blade and tang surface.
- Wear resistance. The high chromium in these steels also aids in the formation of chromium carbides, extremely hard particles that resist wear. Some of these steels have high carbon and chromium (D2) which also creates extremely high wear resistance via chromium carbides, and some steels (CPMS30V, CPMS90V) have high vanadium, which aids in the formation of even more wear resistant particles (vanadium carbides). So wear-resistant are these tool steels that a typical chef's honing steel can be abraded by the knife, actually dulling the small grooves on the chef's steel! For the knife user, this translates to a very long time between sharpenings, high longevity of the tool (generations), and an extremely sharp knife that is always ready to cut.
- High toughness means resistance to breakage at a higher hardness. So when these fine steels are properly hardened and tempered, they can be both hard and tough, which makes for an extremely durable blade. This toughness translates to the very cutting edge, which can be ground extremely thin and still remain tough (resistant to breakage). This, coupled with an overall thin grind geometry makes a very thin and sharp cutting edge that is much more durable and longer-lasting than if made of a lower alloy steel. Since the blade can be created thinly, it is easily sharpened, and with the proper grind geometry, can be re-sharpened for decades more than a typical knife blade made of carbon steel or low carbon stainless steel. More about toughness on this page at this bookmark.
- High tensile strength. Specifically, this is the maximum load that a steel can bear without stretching permanently. This is typically the strength factor of steel that is critical to making a steel choice. How different are the stainless tool steels than standard carbon steels Incredibly different. The tensile strength of 1025 standard carbon steel is 440 MPa (megapascals) or 63,816 pounds per square inch. This seems enormous, but remember that many hundreds or perhaps thousands of PSI of pressure are applied to the microscopic cutting edge. The strength of 440C high chromium martensitic tool steel How about 2030 MPa (294,426 PSI), over four and a half times stronger!
- High finish value. This is a term that is specific to fine artistic handmade tools. In no other tool tradecraft does this concept exist. For example, in jewelry, high finish has a value, but jewelry is not a tool, and is not expected to perform tough and continuous daily tasks. With highly durable tool steels, the capability to finish the steel to the highest degree possible and the capability for the steel to maintain that high finish for the longest possible time is of vital importance. All of the finishes possible on these fine, isotropic, high alloy tool steels are far and above superior what is possible on standard carbon or low alloy steels. This adds immensely to the initial and ultimately to the long term value of the knife, its ability to last long and resist corrosion, its ability to hold and maintain a fine cutting edge, and its ability to retain investment value.
You might then ask the question of why these higher value, extremely fine steels are less often seen on knives. It's really very simple. They are expensive, they are very difficult to machine, cut, and make a knife with, they are unforgiving of error or mistake by the maker, they are hard to work, resistant to abrasives, and a supreme challenge to properly finish. They require special treatment in vacuum-nitrogen furnaces or controlled atmosphere environments when heat treating, they require extremely high critical temperature transformation points, and extremely low temperature quenching points, they are demanding and specific in their treatment to yield a superior cutting blade and knife. This is why they cost more to the knife owner, and why most makers and manufacturers do not offer these steels on their knives. This is the price for being the very best.
420 Stainless Steel
Don't group all stainless steels together; they can be dramatically different!
Are there still bad stainless steels use in knives Of course there are and they are typically and nowadays found on cheap stainless knives imported usually from China, India, Taiwan, or Pakistan. Unfortunately, there are also large, older American companies that still use this horrid steel. These are 420 series stainless steels, which are worth some serious discussion.
420 stainless steel can be very corrosion resistant, and can be very tough (resistant to breakage, flexible without breaking). But please anchor this point into all of your arguments and consideration about this steel: It can only be hardened in its maximum hardness to 51-52 HRC or (52 Rockwell on the C scale). This is substantially and markedly softer than a 440C stainless steel blade, which is typically hardened and tempered to 58HRC, and often higher. 51HRC is softer than knife blades, gouges, and much softer than drills used to drill brass or wood. 51HRC is softer than augers, chisels, axes, and even sewing needles. 51HRC is softer than a leaf spring, screwdrivers, softer than even the cheapest hand-saw for wood that you can sharpen with a file. Yep, that 420 stainless steel blade that is now on most Ka-Bar knives is soft at its very highest potential of hardness, particularly when compared to fine high alloy stainless steel knives. Most of the Ka-bar knives are made of 420 stainless steel, and you'll see a sneaky advertising ploy from the manufacturer of these steels claiming the hardness is 52-58 Rockwell. This is a ridiculous, huge range of hardness, which tells me that they are either careless about their heat treating, or they want you to ignore the 52 and hope that you'll think their knives are harder (they aren't and can't be if they are 420 stainless steel). Why can't 420 be made has hard (and wear resistant) as say, 440C Why that's simple, by looking at just one alloy component: carbon. 440C has over ten times the carbon of 420. TEN TIMES!
Make no mistake; the big name knife manufacturers here and overseas are mostly using 420 stainless steels. I use the phrase "420 series" because they may have variations, versions that have slightly higher carbon content to push the hardness up somewhat, but this is still a bad, cheap steel for any blade. Remember that 440C has ten times the carbon. They make claims on their web sites and promotional material how great 420 is, but now you know the truth.
After reading this, now you know why those cheap 420 series stainless steel blades gave all other stainless steels a bad reputation, and will continue to do so. Why do these companies and manufacturers use 420 Because it is super-cheap, easier to stamp out, grind, machine, work, and manufacture a knife with, and that represents a substantial savings to them, not to the person who wants the best knife steels for his investment. Don't group all stainless steels together; they can be drastically different!
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
Hello Mr. Fisher,
Thank you for your willingness to share your knowledge through your website. I have learned so much and have had my view on knives permanently altered by the knowledge I gained from reading your website.
I will begin the same way as many of letters you receive by saying “Thank You!” Your website and the information you provide are extremely appreciated. Factory made knives are ruined for me now that you have provided a framework for me to logically think through what they are offering. I will admit that I was taken in by what you refer to as the “mysticism” of the knife industry until I read your site. I am a mechanical engineer for an aerospace company and as I read your site, all of your arguments were logical and matched to everything I had been taught in school. My whole perspective on what a good knife is has changed.
More about this PJLT
I was shocked when I read on a knife maker's website that "Chromium prevents the steel from rusting but significantly degrades edge holding capabilities of the steel. All steels are composed of grains of the various alloying elements, the relatively large size of chromium results in a blade that will quickly dull and be very difficult to re-sharpen."
I was saddened when I read this, because it's completely wrong. It was easy to see why this guy wrote this; he's making damascus chef's knives, knives with blades out of 52100 low alloy carbon steel, and he's trying to paint a better picture of his low alloy carbon steel. If you buy this guy's statements you are, sadly, misinformed.
Let's get this very straight and clear. Chromium is an alloy that HELPS hardness, hardenability, and wear resistance, forming chromium carbides which are extremely hard and wear-resistant, quite the opposite of what this guy claims. It's unfortunate that he hasn't educated himself by reading a book on tool steels and metallurgy before he made such horrid misrepresentations on his web site.
From the Machinist's guide and AISI standards: "Chromium improves hardenability, and together with high carbon provides both wear resistance and toughness, a combination valuable in tool applications."
What How could this be unclear Why would this fellow make such a ridiculous claim
It's simple. He's making chef's knives from 52100 carbon steel, and he's trying to justify why you should purchase a lesser steel blade from him. 52100 is the worst type of steel for chef's knives; it will rust at the first opportunity, and is not even a tool steel. 52100 is listed (in machinist's and AISI standards) as "a straight chromium electric furnace steel, and is of medium hardenability." A couple things stand out here:
- 52100 is a chromium steel, which means it has a small amount of chromium (1.3-1.6%). This is in the steel to improve hardenability and wear resistance, yep, the very opposite of what he claims. However, there is not enough chromium or other alloy elements in 52100 to make it a high alloy or tool steel, and not near enough to make it corrosion resistant in any way.
- 52100 is actually listed as a "Low alloy carbon steel" It is primarily used to make economical (cheap) ball bearing races.
- 52100 has low temperatures, and can be hand-forged. This is why it's popular with knife makers, because you can heat it and hammer it into a blade easily.
- 52100 is listed as having extremely low corrosion resistance, exactly what you do not want in a chef's knife!
- 52100's greatest advantage is that it is listed as economical and affordable. To me, this means cheap.
- 52100 is easy to forge, machine, cut, drill, hammer, and grind, and therefore easy to make a knife with.
From this, the misconceptions are pretty clear; he is either uneducated or he's lying. He drones on about the grain size of the various steels (which has nothing to do with wear resistance), and the "bonding" between the grains (which is just gibberish and nonsense), trying to convince the reader that somehow the cheaper, lesser low alloy steel is somehow better than chromium tool steels.
Look, it's okay to make a knife from 52100 low alloy carbon steel; many makers do. It's a decent steel, and can be hammered into a wear-resistant knife blade with limited use. But to claim it's somehow superior to high chromium and high alloy tool steels is just a lie; it is far inferior to high alloy tool steels, that's why they are the premium materials in the finest knives, tools, instruments, and components in wear-resistant industrial applications.
In any case, this is not the type of steel for any chef's knife, as it will corrode away at every opportunity, at the cutting edge, on the surface, and in any part of the blade where moisture from any source contacts it. It will stain, rust, pit and stink, as it corrodes into your food. This application for the kitchen is just wrong. Why would you punish a client and knife owner with this
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this Chef's Set
Whether is CPMS30V, 440CPV, BG42, CPM(T)440V, SM 100, AUS10 CGRF8X0LG, or BR5-49: you're convinced. One of these "new" steels is the answer to your knife dreams. The steel will hold a razor's edge forever, can be hammered through a steel anvil, bend 45° without breaking, never rust, weigh only a feather, pry diamonds out of raw stone, then shave your facial hair, cut the umbilical cord on your new baby, send waves of terror through aggressors at the mere sight of it, send waves of awe through fellow collectors at the mere thought of it, and preserve freedom for all mankind. Oh, and it can be sharpened by passing it through a summer breeze. Really
Hopefully, you've read about the factory practice of special steel designations in the topic above, and more information on these practices are detailed on my Handmade Custom Knives vs. Factory Knives page.
I get these questions all the time. Is this latest craze or a gimmick, or is there a real new miracle tool steel If there were a miracle steel, don't you think that it would sweep the country, be used on the latest high quality military grade and medical machines Wouldn't it be used to cut other metals on machine tools like lathes, mills, boring machines, planers, drills and other machines Why, of course it would. So what is all the hoopla about
Pop steels, that's what. In the 1980s it was 154CM, in the early 1990s it was ceramics, in the late 1990s it was BG42, and lately it's been CPMS3V. Look, they are all good steels (except ceramics, and nickel-titanium alloys which are not steels at all) and they all can make and still do make a fine knife. I've used most of them, but they all have limitations as do all blade materials. So why are these pop steel trends so prevalent
Factories, knife makers, dealers, importers, and salesmen always need something new. That is because they must continually sell the hyperbole, to generate interest in their product. Usually, this is because of poor overall product design. In knives, the fit and finish and balance and accessories are all labor-intensive high skill areas of production, and the fine hands-on workmanship required to make a fine finish, fit, balance, and accessories often does not happen. Factories and makers of low quality knives then rely upon gimmicks, tricks, hype, and envy to sell their product. So, every couple years, a new steel hits the market and all the guys are talking about it. It's on the forums, in the magazines, and in discussions at shows. It's the future of knife making, lots of sales are made based on it, and then it just fades away as another gimmick steel name starts dripping off the drooling tongues of dealers, suppliers, factories, collectors, and makers. Read more about this and other knife truths at my Factory Knives vs. Custom Handmade Knives page. It does not mean that these popular steels are not worth investing in, they may well be. But will they replace all tool steels in knife blades Of course not, because every steel has its advantages and disadvantages.
Far too often, makers, manufacturers, and even knife dealers make up names and designations for the blade steel. These are not trade names originating at the foundry, they are advertising ploys. Read the section below: "What about Special Steel Designations" for more about this.
Though there are very good tool steels, there is no super steel. You can read more details about this on my FAQ page at the question: Is there an ultimate blade My military, police, and professional collectors know that with most production knives, the hype is thicker than fertilizer at a feed lot. Yes, there are some very good knives out there, made of fine steels. I even use many of the steels I've identified above because they are good steels. But more attention should be paid to design, fit, finish, balance, accessories, and service, because these factors are what is woefully lacking in most knife purchases and ultimately, it is these factors that determine the value of a knife. This point is so important, I've decided to give it it's own page.
Do I use these many kinds of steel Sure, I do, but the reasonability and economy is sometimes prohibitive. Steels may prohibitively expensive to purchase, tool, grind, and make a knife with. And do you benefit from their attributes Usually, you'll never realize that benefit, because these specialty steels were not developed for hand knives. They were developed to machine, cut, die press, and form other metals and materials for industry, usually at high feed rates, high speeds, with extreme pressures and heat, sometimes under corrosive chemical exposures. The CPM high vanadium tool steels were created and are mainly used in plastic injection molding machines. Don't think that the steel manufacturers rely on knife makers and knife buyers to produce their income. Knife blade steels are roughly 1-1.5% of the tool and high alloy steel business. Knifemakers just pick up on these steels because makers like to experiment. So they find that they all perform pretty well. I even tried some M2 once to make a knife, the performance was outstanding, but the steel had ugly waves and texture in the surface. I don't know if the user ever sharpened it, because he couldn't. Only a diamond grinder would sharpen it. So there's the limitation of usability and service too. The truth is, if more factories and knifemakers improved those six points: design, fit, finish, balance, accessories, and service, they wouldn't need to hype some specialty steel as a gimmick. Read more about that.
What about testing knife blades to determine performance and which steel is best Read the entire page on Knife Testing at this link.Back to Topics
Here's an email asking for clarifications about my steel discussion on my site:
I have really been thinking hard about the knife I would like you to make me. I think I am almost done with the design of it. I have a few question about steels and their finishes. I read what you said about S30V steel and I think it is weird that the steel does have "even distribution of alloy elements" but yet it still chips at the edge. I went to the website of the people that make the S30V and S60V steels and of course they did make it sound like the "best knife steel ever" but I think I trust your opinion more. Why do you think the steel would still chip even though it has better distribution of the alloy elements I have read a lot about the S30V steel on the internet and some people say that all steel chips at the edge, is this true
Also, I really want my knife to have the best finish possible. Your chart on your website says that 440C has a "excellent" finish and ATS-34 has a "very good" finish. But, then in the section above the chart were you talk more about each steel it says that ATS-34 has a bit smoother finish than 440C. Does this mean that ATS-34 would have the best finish or 440C Well, sorry for the long e-mail. I just really need to know so that I can pick the best steel for me. I'll be e-mailing you my design for my knife soon to see what you think, then we can go from there. Just let me know that you think. Thanks!!!
Hi, B. Thanks for the thoughtful questions.
When guys talk about steel chipping on the microscopic edge, they may be talking about edge wear. Because some of the crystalline structures in steel are very hard, like iron carbides, tungsten carbides, chromium carbides, and vanadium carbides, these extremely hard particles are brittle, so they may chip off on a microscopic level. This would show up as normal edge dulling, in concert with softer components of the edge which will wear down and abrade away. The concern I wrote about on the site is that some of the manufactured knives made with CPMS30V and CPMS60V have been returned and analyzed, and reported to have a large amount of edge chipping, more than other typical knife steels. This is why I wrote about the concern, several sources relate that the long term use of these steels for knife blades is not yet proven or widely accepted by some clients. (Note: I've since talked to the manufacturer of CPMS30V steel, and discovered that in the online references to this steel type chipping at the cutting edges, both occurrences were due to austenitizing of the steel. One blade in question was overheated during sharpening, thus making it hard and brittle, and one blade was incorrectly heat treated overall. My thanks for clarification to Crucible Materials Corporation)
Does that mean that I think they are not good steels No, they are great steels, as are so many others. If there were a super steel, you’d see it sweep the world, replacing every tool steel known or used by industry and the military. Why do you think that is not so Each steel has different properties, and each different uses. Got a special steel you prefer I’ll try to make a knife with it!
Please remember that people who sell particular steel types constantly hype their properties, as if that was the all-important measure of a fine knife. Mystery steels, specialty steels, and proprietary steels are not too far removed in discussion from “magical” steels… These same sites and sales people tend to ignore blade geometry, fit, finish, accessories, service, and above all, overall knife balance. The truth is, there are a whole host of steels that make outstanding knife blades. Don’t get swept up in the minutiae of alloy elements and properties, when all you want is a good, serviceable, reasonably hard, tough, and wear-resistant knife blade. None of these steels will allow you to cut a piece of agate, saw through a bank safe, or pry an engine block from a frame. The reason I throw in those ridiculous images is because that is typical of the misplaced hype many of these sites and suppliers spew. My gosh, you’ve got guys calling themselves scientists on the internet endlessly discussing the microscopic details of every compound at the cutting edge, and most people who use knives carry a box cutter to open boxes, and prep their food with cheap big-chain store kitchen knives. Why do they do this To some it may be a valid interest, but if they were really top-flight researchers, wouldn't they be working as metallurgists in the aerospace industry, for the military, or for big universities like Midwestern Want to know what I’m talking about Google Ferrium C69, by Questek Steel, and Greg Olson. Amazing stuff, but it probably won’t find its way to the custom knife world in a regular way, because it’s just too expensive. Who would pay to carbon case a knife blade in a stream of hot plasma anyway
It is, after all, only a knife. What do you expect it to do How large, or small, how heavy or light Can hold a decent edge, can you re-sharpen it reasonably easy Will it be comfortable Will it have any lasting value Does it have a good sheath Is it worth investing your money in
When my grandchildren spend time in the shop with me, I make sure that they know just what fine handmade and custom knife making is about. I drill this question and into their heads until they know the answer by heart.
Question: "What is the difference between a fine handmade and custom knife, and a poorly made or manufactured knife"
Answer: "The handmade and custom knife increases in value year after year, the other knives decrease in value."
Thanks for the head’s up on the steel finishes, I’ll clarify those better on the site. The suppliers are different, and some ATS34 finishes smoother, and some is more granular. The 440C has higher corrosion resistance and therefore retains its finish longer.
More about this Altair
Okay, you want details. Metallurgical specifics, because you have a keen need to know just what it is that you're using, paying for, or requesting in the blade steel. Please be sure and read about the pop steels above, and all of the pertinent information on the FAQ page. Then be sure and read the several topics just below this one, for some more information. Please remember that these steels are the steels I use, and feel free to ask other knife makers about the steels they use and are familiar with.
Look, there are many good knife steels out there. When sites and discussions go on and on about steel types and properties, ad nauseam, they are often ignoring balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel property details! The steel is just the start of the knife, not the whole. If it were, every knife made of the same steel would be the same, and every maker in the world would be out of business, not buried in orders and very expensive projects. When you see this type of site, ask to see their knives. That will tell you a lot!
What about testing knife blades to determine performance and which steel is best Read the entire page on Knife Testing at this link.
There are a great number of tool steels, and like most custom knife makers, I have my favorites. The reason a knife maker chooses a knife steel depends on a list of requirements. Often, a client hasn't even considered some of them when he starts the conversation. The word best comes up frequently. He wants the best performance, the best durability, the best looking. "Just give me the best steel, Jay," he'll say, and then he'll have the best knife. It's just not that simple. The knife maker must balance many things in his choices, some factors not even considered by the client. Here they are in detail:
- Physical properties: The physical properties of the knife blade (and ultimately the knife itself) can be generalized in a few factors:
- Serviceability is my own term, and it refers to the maintenance requirements of all knife blades. Blades have active areas, mainly the cutting edge, the point, and the finish. All of these areas must be serviced and maintained, and the range of care can be seldom or frequent. There are also serviceability requirements of the handle and sheath, and those are discussed on other appropriate web pages on this site. The knife must be suited to its environment; for instance, you wouldn't want to carry a carbon steel blade that can easily rust on marine rescue missions in the ocean. The four factors of knife blade service are:
- Financial factors: the finest knives are not cheap, and a knife buyer's needs and desires are often tempered by these vital factors. The three factors to consider about the financial aspect of a handmade or custom knife purchase are:
So, to select a steel type for a blade: here are the considerations: the physical factors of hardness, toughness, and wear resistance, the serviceability factors of sharpening, geometry, point service, finish, and corrosion resistance, and the financial factors of cost, value, size, and name. Seems so simple...
Hey, where is the strength requirement Read the next topic.Back to Topics
This is Jared Lay; my family has bought several knives from you. I bought my brother, Jeremiah Lay, a PJLT Shank knife for him when he graduated the fire academy. Well, long story short, my brother uses the knife all the time and just had it with him in the Philippines, after the destruction. He went into some areas for rescue that were the first rescue people in. Just wanted you to know we love the knives you have made and that they are doing great work across the world.
More about this Dorado
Every now and then, I read a post or article that talks about strength as a factor in knife blades. By definition, the strength of materials deals with the external forces applied to elastic bodies. When these forces are applied, deformations and stresses occur, and in extreme cases, failure in the form of bending or fracture. There are a large number of factors to consider in applied forces and metal choices, geometry, time elements, temperature, corrosive exposures, and others, which all have an effect on failure rates. You'll see the word "strong" thrown out there as if it is the all-encompassing final descriptive word to describe metals and performance.
If resistance to failure was the sole measure of a knife blade, why not just leave the blade unhardened, untempered, because that makes it the most resistant to breakage If you have an unhardened, untempered piece of steel, you can bend it this way and that way, and stretch it, and twist it, and deform it, and guess what It won't break. It will just deform. Eventually, it will work-harden in the area that it is most deformed, then it will become hard, and more brittle, and then it will fracture. Bend a piece of thin metal back and forth until it breaks. We've all done this; so it's easy to understand.
Strength when referring to knife blades is a generalized term. There are all sorts of strength measurements: tensile strength, stress per force of unit area, compressive strength, shearing stress, unit strain, proportional limit, elastic limit, yield point, yield strength, ultimate strength, and more! Read about these strength factors in the section below: More about Toughness and Ductility for greater details about strength.
Many materials are relatively strong. When people and websites and sales vehicles claim that their blades are strong, or very strong, or have the greatest strength, please have a strong stomach for hype (sorry, bad pun). There is so much more to strength that a generalization like this has no place on the most detailed information source in the world, the internet.
Yeah, it's strong. yeah, it's tough, yeah, it's hard and shiny. Kind of an ambiguous, weak claim, isn't it More about Toughness and DuctilityBack to Topics
More about this Hortensius
Another balance question. There are materials that absolutely will not corrode. Ceramic comes to mind. Titanium is nice. But these are not typical blade steels, and there is good reason. They are several orders of magnitude softer than any good knife blade. These materials are either brittle and unsharpenable (ceramic) or have no wear resistance or low tensile strength (titanium). Though you may see these materials and others (monel, bronze, beryllium copper, aluminum-bronze, and copper alloys) used in making non-sparking, non magnetic tools for special hazardous materials exposures and explosive environment applications, they are not hard, wear-resistant, tough, and durable tools.
What about other, lower carbon stainless tool steels In my opinion 440A and 440B stainless steels do not make superior knife blades even though they may be a bit more corrosion resistant than 440C. These steels do have at least .60% carbon and are capable of being hardened and tempered, but are not nearly as wear-resistant as 440C. There is a reason that nearly all highly corrosion resistant ball bearings, shears and tools, and high pressure valve seats are made of 440C.
One may claim that CPMS30V, CPMS60V, and CPMS90V are slightly more corrosion resistant than 440C, but since they can not be mirror finished, their rough surface may actually accelerate corrosion (see my book clip on finishes below). There are a host of other metals used in knife blades and a large variety of performance options, so nothing is set in stone here. That is why any maker worth his salt will use a variety of steels, and yet still have his favorites.Back to Topics
More about this Sadr
The phrase edge retention is a recent one and pops up in conversations and discussions about knives. It's a fancy way to describe wear resistance, pure and simple. In the metalworking and machinery trade, wear resistance is the resistance to wearing away of the surface of a metal on an exposed edge, surface, or area. It's important to know that wear resistance is mostly subjective, that is, it is not specifically calculated with technical apparatus, but observed by experiment and comparison. These wear resistance factors can only be determined by generalities, such as best, fair, medium, and poor when compared to other metals; there is no specific measurement to assign a numerical value to wear resistance (or edge retention).
Why isn't there a specific number, designation, or assignment pertaining to individual metal alloys and wear resistance It is because there are far too many factors in play in the knife to make any specific comparison. The steel type is not enough information; as the alloy may vary in content from manufacturer to manufacturer, and even between foundry runs. The heat treating may vary between tested blades, the actual temper of the blade may have slight variations along its length. The geometry is extremely variable, and even if the blades appear the same, variations in grind thickness, sharpening angles, and edge faces mean that there can be no specific and detailed measurement. The surface finish varies even along the cutting edge length. Even in machine tools like drills, milling cutters, and other tools used in the metal machining trades to cut, there are no specific wear resistance values, only generalities. In order to be specific in hand knives, one would have to make a knife blade out of every material available, created to the exact same dimensions (within a millionth of an inch), finish all surfaces exactly the same (which is impossible), before the specific comparison could be made. Our test knives would have to have the exact same geometry of profile curve, sharpening angles, and angle of approach to the cutting task. One would have to negate the other critical factors in knife blade construction, like toughness (often more important than wear resistance), corrosion resistance, and sharpenability itself!
What about testing knife blades to determine performance and which steel is best Read the entire page on Knife Testing at this link.
In advertising, you may see stacks of paper clamped in blocks with knives mounted to an apparatus that forces the blade into the paper repeatedly until it quits cutting, signifying dullness. You may see knives shaving wood, paper, cloth, or cutting rope over and again until the edges dull and this is supposed to prove one steel, blade, or process of knife making is superior to another. Frankly, all of these so-called tests are subjective. Subjective means "existing in the mind" and this is what people who perform these tests want to happen in your mind. They want you to think that (shockingly) their product is superior while they hope you'll ignore bad fit, weak design, cheap materials, amateur skill, poor finish, weak construction, lack of accessories, and the other factors that make a knife an investment or critical application knife vs. a simple, throwaway tool.
What does this have to do with edge retention (actually wear resistance) of the modern handmade knife It's simple. Everybody wants a knife that has high wear resistance, that is, one that holds an edge a long time between sharpenings. With modern, high alloy tool steels, high wear resistance is (or should be) a given when compared to plain carbon or low alloy tool steels (more about these at this bookmark). In the chart below, you can see a comparison of wear resistance between the steel alloys I use. Please remember to balance these with toughness, grind geometry, and corrosion resistance as the edge also corrodes away as well as wears away. If the blade edge is too hard, it's brittle, and can actually chip away microscopically, presenting as wear, particularly if the blade is ground too thin. The maker must balance the wear resistance with the grind geometry, the profile shape, the intended use of the knife, and the service factor of sharpenability, because sooner or later, every edge dulls and will have to be sharpened.
For most of these factors, it's fairly simple; the knife maker should be able to balance the knife type, the intended use, the blade geometry, the steel type, the grind geometry, the edge thickness, the weight of the blade, the corrosion resistance needed, and the service factor with a client's ability to pay for the blade. Yes, the financial factor is also one rarely mentioned.
If you're still asking for the best edge retention, I'll clearly point you to the material that has the highest hardness known. That would be diamond. Oh, there are other carbon nano-particles that claim to be harder, but they are a bit more expensive to produce. I'm sure that millions of dollars will give you the performance you may need, in having a knife that never, ever needs sharpening. If you can't afford this, I would suggest a reasonable balance between all those other factors listed on this page.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this Domovoi
I had a good laugh when I saw on another site that I've been accused of pushing a particular type of tool steel by self-proclaimed experts on knife blade steel (By the way, when you see these sites, ask how many knife blades the expert has actually made. Then ask to see a list of military and professional clients he's made knives for. Then ask to read the testimonials of support submitted by his military and professional clients. See mine here in over a dozen pages with hundreds of photos, descriptions and testimonials).
I don't push any particular steel. If you have a special steel you prefer, please, by all means, let me know why, and I'll make a knife out of it for you! I don't have an agenda about the steels I use, I just have my favorites. There are new ones all the time, and you might be surprised to find out that I've tried quite a few. I don't get kickbacks, or promotional payment, or some kind of benefit from suggesting a particular type of steel. I also am very clear about the steels I do use, and if you have a particular and specific question about the type of steel used in a knife I make for you, by all means, ask! Please don't ask about steels other makers use, feel free to ask them. Want to know what is being overlooked by experts arguing about steel types Fit, finish, balance, design, accessories, and service.Some wisdom:
Look, there are many good knife steels out there. When sites and discussions go on and on about steel types and properties, ad nauseam, they are often ignoring balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel property details! The steel is just the start of the knife, not the whole. If it were, every knife maker in the world would be out of business, not buried in orders and very expensive projects. When you see this type of site, ask to see their knives. That will tell you a lot!Back to Topics
More about this Andrimne
On one discussion forum, my little wisdom box about web sites and forum discussions going on and on about steel types and ignoring the overall properties, design, and value of the knife was noted, referenced, and repeated. It got a lot of agreement as most knife makers realize the truth and impact in that statement. I appreciated the posting and reference, as the little box that appears frequently on my site is always important to remember.
Then one genius attacked this very page, claiming that I go on and on about blade steels on my own site, and claimed hypocrisy in my statement. I didn't bother to respond, as this guy's amateur knives speak for themselves, and bolster my very claims.
Just to be clear about going on and on: This is the "Blades" page. This is where I go on and on about steel types, because modern knife blades are the subject of this entire page. Though I briefly mention steel types on my FAQ page, and I do have a small group of individual steel type pages, and I get into Heat Treating and Cryogenic Processing of Knife Blade Steels on a dedicated page on no other page of this site (over 550 pages at the time of this writing) do I elaborate on knife steels. I have many pages dedicated to individual knives, specific groups of knives, handles in general, and even pages dedicated to specific handle materials, knife sheaths, and even display stands. But yes, in a way, this genius is correct, I do discuss (on this very page) specific knife blade steel types and properties in detail.
Welcome to my Blades page, which every month is one of the three most popular pages on my site, getting tens of thousands of hits a day, every day, month after month, year after year. Someone is interested in the information I present here. Please bear with me while I discuss the subject of knife blades, blade geometry, and steel types. To bring some reality to this whole topic, please note that less than one fourth of the topics on this very page are about specific steel types, because as I've stated again and again:Some wisdom:
Look, there are many good knife steels out there. When sites and discussions go on and on about steel types and properties, ad nauseam, they are often ignoring balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel property details! The steel is just the start of the knife, not the whole. If it were, every knife maker in the world would be out of business, not buried in orders and very expensive projects. When you see this type of site, ask to see their knives. That will tell you a lot!
Back to Topics
More about this Achelous
Any company that will not tell you what its product is made of is suspect.
Here is a detailed list of the steels I use, and some I don't but get asked about frequently, along with information, data, and my reasons for using (or not using) them for knife blades. I won't go into the specific alloy components and percentages, as they are readily available all over the Internet and from common references. These are not mysterious or secret process steels; these are steels that are listed, detailed, and defined by AISI, SAE, and ASTM. They are industry standards for a reason; they have a proven and longstanding track record of dependable application in industry; there benefits are well known, and they typically have to endure much more rigorous and detrimental service than a knife blade would ever see!
It's important to recognize that steels that are hyped with "secret" formulas, "private" alloy information, and mysterious origins or components are all hype. Every time you see this used in advertising, you should be on notice that any company that makes any item and will not tell you in detail what it is made of is suspect. This is an old and weak ploy among knife makers, manufacturers, and factories, both small and large, and it surprises me how many people are still taken in by this cheap and crooked ploy. Yes, it is crooked to claim some steel has a "secret" formula, or has proprietary or undisclosed alloy elements. Only crooks will tell you this. They want you to think it's some great mysterious element or process, so you'll be sold on the hype. It's well known in this industry that factories and knife manufacturers make up steel designations, because frankly, there is no law against it! While the jewelry industry is required to disclose alloys of precious metals, no such requirement exists for knife makers or manufacturers. Please understand that if they really did have some great and fantastic new alloy, it would sweep the industrial, military, and professional tooling industries and quickly replace all the other known and proven tool steels. That alone should tell you that they are simply trying to sell the image, and you should immediately move on to the next knife maker, supplier, or factory.
There is no super steel, only reasonable choices. While today, we have many choices, there are definite characteristics of each tool steel used to make a knife, both positive and negative. It's all about educating yourself to understand why each type is chosen, and working with a knowledgeable, experienced knife maker who can answer your questions and create a knife with the steel that best suits your application or need. Below is a list of steels I use, and some I don't with details about their pros and cons followed by a comparison chart. As you read these descriptions, you'll understand more about what steel is used and why, and how you can choose the best steel for your own knife. Please remember, too, that it is a knowledgeable and experienced knife maker who can bring the best out of your steel choice, because any of these steels can be mishandled, mistreated, and poorly processed yielding a less than optimum blade.
What about testing knife blades to determine performance and which steel is best Read the entire page on Knife Testing at this link. Want to know more than the average knife maker, knife company, and knife expert about steel treatment Try my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
440C High chromium martensitic stainless tool steel is chosen for it's machinability, ease of care, and long lasting value. Actually classified as SAE 51440C, the description in the reference bible "Machinery's Handbook" claims: "This steel has the greatest quenched hardness and wear resistance upon heat treatment of any corrosion or heat-resistant steel." 440C is one of the most often used knife steels in the handmade industry because flat out, it's a great steel. It is my most often used steel, and it has a fantastic reputation of reliability and value. One of the seldom mentioned characteristics of 440C is its high toughness. This steel, when properly processed, is tougher than some of the other alloys like S30V and S90V and D2, and is more resistant to breakage and fracture both in the heavier cross sections of the knife and at the very thin cutting edge. 440C also has a very high modulus of elasticity, which means the steel is very stiff when under load. 440C is one of the most stain resistant of the stainless tool steels, with up to 18% chromium and up to 1.5% carbon. Not much will corrode this blade steel, and it's tough and hard and wear resistant. No tool steel is rust proof, but 440C is about the best you can get for fine custom knives because in addition to being a high chromium tool steel, it can be smoothly and brightly mirror polished. For long lasting beauty, it's the choice for most of my knives, and for nearly all my high end and sculptural pieces. 440C has and retains high investment value because of its capability to be highly finished and polished, and keep it indefinitely with little care. It is a beautiful high chromium steel. 440C is used in more of my combat knives than any other of the steels I use because it is proven to work well, limit corrosion, and be strong and tough enough for combat tactical and rescue operations, yet it can be sharpened with only moderate effort. 440C is a great steel; Just look at some of the finest knives made by some of the best makers in the world. Many are using or have used 440C. It is a gorgeous steel, with a bright bluish-chrome color when polished. When you want an investment piece to have a high finish, hold it well, and hold it for decades and decades, 440C is the way to go. If you want a combat tactical and combat search and rescue knife, one that will not easily and readily rust, is tough and durable, and will not deteriorate if you neglect it, one that will be useful and dependable, one that has proven itself in marine salt water environments and desert sands, remember that 440C is the steel most often selected by my professional and military clients for these reasons. This is why it is industry's choice for corrosion resistant ball bearings, high wear valve seats, and abrasion-resistant shear and planer blades. Want more information on 440C, and the love/hate affair with this steel Check out this page. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
ATS-34 high molybdenum martensitic stainless tool steel is essentially the same as 440C, but 3% of the chromium has been replaced by molybdenum. So it's a little less corrosion resistant, but it's tougher. That means it's more resistant to breakage. It is an extreme "chrome-moly" steel. The finish can be a bit smoother than 440C, but I've also had some that is grainy, and the grain is similar to the orange peel of D2. Because of the additional toughness, a thinner cross section can be ground for blades like double-edged tactical knives without sacrificing strength. For the knifemaker, it's also harder to work with: harder on tools, abrasive belts, and is more expensive. Being not as corrosion resistant as 440C, it may not hold its investment value for as long, but we're splitting hairs here. It should retain its beauty long after you and I are dust, with minimal care as long as it's not exposed to corrosive or continual marine environments. Another unique aspect of ATS-34 is its extremely high process temperature. What this means is that because of the high tempering temperature (1000ºF), it resists change or losing temper at any temperature below that. This makes a very heat-resistant knife blade. In industrial applications, this is sometimes called a "hot work" tool steel for these reasons. Want to know even more about ATS-34 Try this special page. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
154CM is essentially the same as ATS-34, but is a US domestic version. I don't use it anymore because it has a reputation of having pockets and voids in the steel, making it unusable in the custom knife field. I've never discovered any pockets or holes in ATS-34. Other makers may argue, but I won't take a chance in working up a blade, and finding a hole in it! More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
CPM154CM is similar in composition to 154CM above (and similar in composition to ATS-34), but is a crucible particle metallurgy tool steel, made of sintered alloys formed together under tremendous heat and pressure. Also called a "powder steel," This is Crucible Steel's version of the 154CM, made to better tolerances and, with the crucible particle manufacturing process, a very even distribution of critical alloying elements. It is much like ATS-34 in that it is a high molybdenum stainless tool steel, and very tough (resistant to breakage). It is not as corrosion resistant as 440C. One might ask why even use ATS-34, since the two are so similar in composition. The CPM154CM steel is expensive. Very. And sizes are limited. The cost of making a knife in this material and finishing it are more expensive, so one must question why they might need it. CPM154CM does excel in one area, and that is finish. This steel finishes absolutely beautifully. The mirror finish is even, smooth, and uniform with no crystalline pattern that can be seen with the naked eye. My recommendation for using this steel is on a high art or investment grade knife of fairly standard sizing, where a supreme finish and high toughness are needed. This steel is also hard to sharpen and may require diamond abrasives or motorized equipment to work up a good edge. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
O1 Oil hardening high alloy tungsten-vanadium tool steel is a highly underrated, yet superb oil-hardening, cold work tool and die steel and is a high alloy tungsten-vanadium tool steel that can be made tough, hard, and extremely sharp and wear resistant. Please note that not all O-1 by all manufacturers has the same alloy content! Some versions contain no vanadium whatsoever, and those versions of the alloy do not benefit from the advantage of vanadium carbides that increase wear resistance. The O-1 I use is a tungsten-vanadium version, and has very high wear resistance. O-1 blues well, so tactical models and art pieces that require a dark blade look fantastic. It's fairly easy to work in the annealed state, so prices can be kept reasonable. Polishing it is difficult, and requires a different regime than the stainless tool steels. O-1 will rust if not cared for, but it's a great steel, maintains an incredibly sharp, fine edge and is relatively easy to sharpen in the field. It is usually used on knives that will be professionally hot-blued. Want to know even more about O1 Try this special page. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
O2 Oil hardening high manganese tool steel is seldom marketed in the United States. For knife blades, O1 is a much better steel because O2 does not have vanadium, tungsten, or chromium. O2 does have additional manganese which aids in machining and forming operations used to make the final steel piece, and the manganese aids in depth of hardening, which is not particularly important on knife blades, because they are physically thin objects. Simply put, O1 is a much better steel for knife blades and that is one of the reasons you don't see to many O2 knife blades. Read more detail about O2 at this bookmark on my O1 knife blades page.
Back to Topics
Plain carbon (standard) steels: These are the typical steels used by many knife makers and are classified in the Machinists' Guide as Standard Carbon Steels. These are inexpensive and commonplace steels like 1025, 1075, 1095 and 5150 that are fairly common on hand-forged knives. They are used because they can be hand-forged in the open atmosphere, have a relatively low critical temperature, and are easy and forgiving to work with. I rarely use them because there are so much better alloy steels on the market that will offer increased wear resistance, increased corrosion resistance, and higher toughness at a higher hardness than plain carbon standard steels. One more very important point: none of these steels have any corrosion resistance whatever without treatment. Bare and untreated, they will rust at the drop of a hat. Open air, dry rooms, stored in a case, container, or vault, they will corrode and pit if not continually and meticulously oiled, waxed, and babied. It doesn't matter if they are folded into a fascinating pattern-welded heat-colored red, white, and blue damascus pattern of Old Glory against a background of fireworks and the lyrics written by Francis Scott Key. They can rust, corrode, pit, stain, and stink, unless meticulously cared for. By the way, heat coloring is not corrosion treatment or corrosion protection! The only exception to this corrosion proclivity is if they are professionally hot-blued, which inhibits corrosion. One must consider why to use these steels in the first place. Where I have used them is in pattern-welded damascus containing, for example, 1095 and nickel. This is a high contrast pattern-welded damascus, and can be quite beautiful if mirror finished and hot blued only. If it's simply etched, the damascus pattern will come out, but the deeply etched 1095 will rust at the first opportunity. That's why these steels must be professionally hot-blued for the very minimum of rust and corrosion protection. They are not a good choice for damp, moist, salt, or any other high humidity and exposure environment, and must not be used in the kitchen, ever! I have used carbon steels only rarely because of these reasons, but will use the damascus patterns and hot bluing. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
1095 is classified as a "Standard Carbon Steel" and because it appears frequently in handmade knives and some manufactured knives, I think it's important to go into this steel's properties a bit deeper. AISI 1095 (UNS G10950) is classified as a standard carbon steel because it is low in alloy elements, and is not classified as an alloy steel (AISI, SAE, and Machinist's Guide). Some sources call this simply a carbon steel, but the important thing to remember is that this is a relatively low alloy steel. It contains about 1% carbon which is significant, because this brings this steel into the hypereutectoid range of steels (more than .8% carbon), meaning this steel has high hardenability, and fairly high strength. However, it is known for being brittle and this means that for knife blades, extremely high hardnesses should be avoided. When you see a knife blade made of 1095 and it's hardened and tempered to 61 Rockwell and above, you might (correctly) suspect that it will be very brittle when honed, ground, or sharpened to a thin cutting edge, and this may show as high wear, since fractures can occur microscopically.
It's common practice to differentially temper knife blades made of 1095, with the idea that the spine is more tough and less brittle while the cutting edge is left at high hardness. This creates a temper line (hamon), but this is problematic. The reason is that while the spine may be less brittle, the cutting edge left at high hardness is still brittle, and this is where the knife is very thin (or should be) to establish a proper, effective low sharpening angle for a serviceable cutting edge. So, where the blade is thin, it's more brittle, and this is rarely mentioned among knifemakers and clients who find this type of blade attractive. The place where you would want the blade to be tough and hard (the cutting edge) is not tough, and this can lead to breakage. In order to prevent this, knives made this way are often ground flatly, or even convexly, so that they are relatively thick at the cutting edge to prevent breakage. This means that the blade has a fairly limited life, as blades ground this way and sharpened repeatedly will quickly become too thick to establish a thin cutting edge without substantial relieving (thinning of the steel at and behind the cutting edge). See the section on this page: Grind Geometry Comparison to understand this. This severely limits this steel's use, but it has a following because it's cheap, easy to forge, and fairly easy to heat treat, at least conventionally. It also welds readily with any process, making it easy to forge and bond in pattern-welded billets.The entire group of standard carbon steels that 1095 is part of find their main uses in the industrial and automotive world as springs or spring-type applications, and as plow shares, mower blades (think large agricultural machines, not a lawn mower), disc blades, twine holders, spring tooth holders, rake teeth, cultivators, scraper blades (think excavation and road building equipment), and springs, springs, springs. Coil springs for vehicles are often 1080, a lower carbon version, since 1080 has much higher toughness, and nearly twice the impact strength of 1095. While 1095 is a very strong steel, you might be surprised to learn that at the same hardness, 1095 has a markedly lower tensile strength than 440C. 1095, while being capable of being very hard and somewhat wear resistant, is limited and and somewhat brittle when compared to high alloy steels. Knifemakers typically use 1095 because it can be hand-forged and is very plentiful and cheap (lots of it on the farm!)
The sole reason you'll see any knife of mine made with 1095 is because it forges readily with nickel for high contrast pattern-welded damascus blades, which are visually striking. Other than that, I see no reason to use 1095 for any other knife application than appearance or decorative work. This is because there are so much better steels to fit the bill. One of the huge drawbacks to this steel is that, being a low alloy steel, it has no chromium, so it readily and rapidly rusts and corrodes. It can pit and stink and smell, and this is why I find it flatly shocking that some knifemakers are using it for chef's knives! Who would want their meal cooked with a darkened, stained, rusty blade If you can't trust it to be wet and remain pristine, how do you trust it when cutting through a lemon, tomato, or any salted products The cutting edge will be the very first thing to corrode, dulling the steel and imparting metallic oxide flavor into the food. Obviously, 1095 should never be used in the kitchen, yet you see this all the time, and Japanese equivalent steels are also frequently used in this misapplication. This is probably because they are easy to and quick to sharpen, and cheap and plentiful to make. So if the kitchen is not the place for this steel, an no wet environment is a good application (jungle, camp, near water, marine, survival, game, or any other potentially wet exposure), then why not use it if the owner and user is going to keep it dry I don't use it (other than in the damascus application described above) because there are so much better steels! If I am going to inhibit corrosion by hot bluing, and want a high carbon, very tough, very strong tool steel blade, I'll use O1, with chromium, tungsten, and vanadium to add to the wear resistance. I'll hot blue it to prevent corrosion, but its a much, much better steel for knife blades. Simply put, 1095 is inferior to all high alloy and stainless steel blade steels, with a very limited application being mostly decorative. And it's cheap. Did I mention cheap Grass or grain cutting tools I suppose it would make a decent sickle... but it does look good in nickel damascus, hot blued.
Back to Topics
D2 cold work high carbon, high chromium die steel: is the highest carbon alloy tool and die steel (thus the "D" designation) typically used in knife making. It has 12% chromium so it doesn't resist corrosion as well as high chromium tool steels (like 440C and ATS-34) and can rust if continually exposed to corrosive moisture, acidic fluids (like orange juice or blood) so requires more attention. However, it is fairly corrosion resistant with minimal care. At up to 1.7% carbon, it can be made extremely hard, and very wear resistant, though not as tough as 440C. The polished finish on D2 will be somewhat mottled with a pronounced orange peel appearance. This is due to chromium carbides forming in the steel during heat treat, the very thing that makes this steel so wonderful (most steels form iron carbides). Please note: some manufacturer's versions of D2 do not exhibit the orange peel granularity in the polished finish because they are made with a higher sulfur content. These high sulfur versions are easier to machine and are designated "sulfurized D2." D2 is very hard to work with, expensive, downright malicious to abrasives, resistant to cutting and milling and metal fabrication. So it's usually used for extreme use knives. Old knife makers will tell you that It has a reputation of holding an edge forever, and being impossible to sharpen. The reputation is well deserved. Most people cannot sharpen D2 in the field, or without diamond abrasives or motorized equipment. One of the seldom mentioned properties of D2 is very high depth of hardening and stability of shape. In the AISI Service Properties details, D2 is designated at the top of the scale for these properties, so intricate shapes can be created and maintained, although D2's machinability is very difficult and that creates additional expense. Sizes are also limited and the steel is very expensive. Want to know more about D2 Try this special page. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
CPMS30V, CPMS60V, CPMS90V (sometimes called S30V, S60V, S90V, 440V): There is a major knife manufacturer who claims right here on the internet that "S30V is the only steel designed just for knife blades." This is a total lie. It's typical of how these sites hype steel while making a lousy, cheap knife overall (see Pop Steels above). I invite you to contact Crucible Particle Technology who makes this steel and their engineers will tell you (as they have told me) that knife blades account for less than 1% of their sales. They will also tell you that these CPM steels were designed and mainly used for plastic injection die molding machines. Knifemakers started using these steels because we are always looking for good blade steels.
It's important to see the CPM designation in front of these steels when their use is claimed by makers and manufacturers. It stands for Crucible Particle Metallurgy and means that the steel components and alloys are mixed and inserted in powdered form into a die, and the steel billet is formed under tremendous heat and pressure, similar to sintering of metallic components. This allows an even distribution of alloy elements that might not be possible by traditional methods. The 30, 60, and 90 designations refer to approximately 3% and 6% and 9% of vanadium in the alloy. Vanadium is used to contribute to the refinement of the carbide structure, and thus improves the forgeability of these steels. It has a very strong tendency to form a hard carbide, which improves both the hardness and the wear properties of these steels. However, a large amount of vanadium makes the grinding of the tool steel very difficult. These steels will eat up grinding and finishing belts at three times the rate of 440c, and are much more expensive. The downside is that the price of machining is high, the price of the material is high, and the availability of sizes are limited. These steels, when properly hardened and tempered do create a very tough, very wear resistant blade, markedly more wear-resistant than than 440C. But they are not as tough (resistant to breakage) as 440C. This is important because microscopic fracturing can occur at the cutting edge which will present as a dull blade, but this occurs usually due to impact or overheating when sharpening. Sharpening must be done with diamond, by hand, and the edge must not be too thin so that it remains durable. So wear-resistant are these steels that sharpening is extremely difficult without motorized equipment and if done so, overheating must be avoided. Sharpening may also take many steps to achieve a very fine edge, so they're not practical for knife users who might need to sharpen these steels in the field who do not have good experience sharpening knives. For the ultimate in wear resistance, CPMS90V is unsurpassed, with 9 percent vanadium and 2.3 percent carbon with 14 percent chromium, the carbides are so plentiful in this steel that even tempered pieces can dull a solid carbide drill or reamer!
One of the main and seldom talked about (elephant in the living room) issues is the inability of these high vanadium versions to be highly finished. Since most makers just rough-grind and hand-sand along the blade length, it doesn't matter, but that is not how a fine investment grade knife is made. None of these high vanadium stainless steels can be mirror finished to any reasonable degree of economy or repeatability. When they are brought up to fine finish and polishing, the finish smears, fogs, and skids (polishing terms), and brings out waves of uneven texture. Frankly, these steels are best left sanded or media (bead, abrasive) blasted. When a steel is media blasted or left in a satin finished condition, it is not as corrosion resistant as a mirror finish by any means or measure, so a good coating of wax can help. The interest in these steels is valid, until a client asks for one to be mirror finished for investment value and high corrosion resistance. I do use these steels, but they are not my most popular because of these issues. An interesting thing to consider is that manufacturers claim that CPMS30V is more corrosion resistant than 440C. But this claim assumes that both steels have the same finish. Since S30V, S60V, and S90V can not be mirror finished, there is no way that in a bead blasted or rough satin finish they are more corrosion resistant than a fine mirror finish on 440C. Read why below. These high vanadium steels can be etched with special mordents and pickles to achieve some interesting artistic finishes. CPMS60V manufacturing has been suspended currently, so any available stock in it is older. These steels are very expensive to purchase and work, and sizes are limited. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
CTS-XHP (CTS™XHP): This is a great steel by Carpenter, one that I'm using more and more. It has high carbon, high chromium, and high molybdenum, and add to that the powder metal technology, and you've got a great high performance steel, when properly hardened, tempered, and processed. It's extremely wear resistant, very tough, and highly corrosion resistant. But like all steels, there are limitations. CTS-XHP is not quite as corrosion resistant as 440C, probably due to the higher carbon content and a bit lower chromium content, but is more wear resistant than 440C. So if corrosion resistance is the major consideration, 440C and N360 have it beat. But these are very small considerations; I doubt most knife users would realize a difference between the two. CTS-XHP is extremely wear resistant, probably the highest wear resistance of any stainless steel that will require high toughness and an excellent finish. CPM S30V and 90V have greater wear resistance, but can not be mirror finished and are not as tough. While Carpenter compares CTS-XHP to D2, this is probably an exaggeration, typical of data sheets and white papers. CTS-XHP does not quite have the toughness of ATS-34 and CPM-154CM, but it's close. In their data sheet, they refer to "refrigeration," which is not standard terminology, and the suggested shallow cryo soak is only an hour, which is flatly inadequate. This is an example of the data sheet simply being a guide, and the maker then being responsible for bringing out the best in these steels. More about that on my Heat Treating and Cryogenic Treatment of Knife Blades page. The wonderful thing about CTS-XHP is that it's an extremely high alloy hypereutectoid steel that is made by powder metal technology, and it takes an absolutely gorgeous finish. It's hard, it's very tough, it's beautiful. This steel is hard to beat when a blade needs to be extremely wear resistant, stainless steel, with high toughness and high beauty. Some of the limitations of this steel are that it's not always available in large sizes and wide widths, it's an expensive steel, and more expensive to process, grind and handle. I'll probably build a dedicated page to this steel in the future; it's a definite performer!
Back to Topics
N360 (Böhler N360 ISOEXTRA®), made by the Austrian based firm of Böhler-Uddeholm, is a nitrogen stainless steel, and is an incredibly corrosion resistant tool steel. This steel is a unique one, an ultramodern, premium, super-clean refined steel, designed for high hardness and wear resistance and incredible corrosion resistance. Most martensitic stainless steels (440C, ATS-34, CPM154CM, S30V, S35VN) can corrode in long term exposure to marine environments, or if left wet for prolonged periods (days), so dive knives are often made with metals that have high corrosion resistance like titanium and austenitic stainless steels. Both titanium and austenitic stainless steels are soft at their highest possible hardness, dozens of times softer than a knife blade should be. This is fine for scraping around a coral bed or occasionally cutting some monofilament, but titanium and austenitic stainless steels are not hard and tough enough for combat duty. They simply will not hold an edge, and are relatively pliable and weak. Böhler, a German foundry, has developed N360 with a totally refined processing method. This approach results in an incredibly corrosion resistant tool steel, a true tool steel, that is hard and tough and durable with extremely high corrosion resistance not found in other stainless steels, even in high chromium 440C. Simply put, this steel has the highest corrosion resistance currently available for a functional, durable, and reliable knife blade, a knife blade exposed to marine or salt water environments, while being very hard, and tough. It's quite a process to make this steel, starting with VIM technology. VIM is Vacuum Induction Melting, or melting from purified electrodes in a vacuum environment, so no critical contaminants or harmful oxygen are present, resulting in a very clean steel. This is a common practice for some of the modern, ultra-refined alloys, but that's just the start. Then, the steel is processed with ESR-P. ESR-P is Electro Slag Remelting under Pressure. This means that the the purified electrodes produced by VIM are remelted in a highly purified and clean environment, through the slag, and under several atmospheres of high pressure nitrogen. This improves the cleanliness and microstructure of the steel, minimizing segregation, controlling solidification, and producing a unique high-nitrogen specialty alloy with great mechanical properties. Without going into detail, the nitrogen takes the place of the carbon in the crystalline structure, so carbon in this steel is very low. What this means to the knife maker and user is that the corrosion resistance of this steel is phenomenal. It's more corrosion resistant than 440C, and even 440B and 440A! It takes and holds a beautiful mirror polish, further increasing the corrosion resistance, and can be passivated for complete exposure protection in critical dive knives. This is not a steel for the common diver; it's reasonable that typically 440C will perform nicely if the gear is dried and stored after use. This steel is for superior performance under brutal corrosive environments, and that is why I use it on my counterterrorism dive knives, knives that are expected to perform in combat, under salt water, and maintain the sharpest and most durable cutting edges and points. The drawback to this steel is the high cost and limited sizes, and my hope is that in time, foundries will make available a wider, thicker stock at a reasonable price. Definitely a specialized performer for specialized applications.
Back to Topics
N690 (Böhler) is a steel made by the Austrian based firm of Böhler-Uddeholm. It's a cobalt-containing alloy and at first glance seems like a great choice for alloy concentration and make-up. It has about the same chromium as 440C, but less carbon, and additionally some vanadium and cobalt, so the direction of chemistry seems to be high wear resistance. The first limitation of this steel is a big one; N690 can not be mirror polished, by the company's own description, "there is a slight haze in the steel." This is typical of vanadium and cobalt-containing alloys. So this means that this particular steel has limitations in use. For instance, I wouldn't be able to use it for any mirror polished application, since it won't take a bright mirror polish. However, this goes beyond just appearance. The fact that it can't be mirror polished means that the corrosion resistance is diminished from what the company claims in comparisons to other stainless steels, since a high mirror finish inhibits corrosion to the highest degree possible. So N690 can only be compared to other steels that can not be mirror polished in this application. The addition of cobalt helps in wear resistance, and this is the main claim that B-U asserts in their documentation: high wear resistance. So, by logic, it must be compared to other steels in the same genre: high chromium stainless steels that can't be mirror polished, that are extremely wear resistant. The comparison steels would then be CPMS30V and CPMS90V. From what I can determine, N690 does not have quite the wear resistance of CPMS30V, though I haven't tested that myself, so all claims are subjective. I do know that N690 is not a powder metal technology steel, so it won't have, by process and physics, the extremely fine distribution of alloy elements that CPMS30V does. Since N690 is conventionally produced, I would be hard-pressed to replace my CPMS30V with it; the performance would have to be incredibly better, and I don't see that. You might think that the N690 may have high temperature resistance properties because of the cobalt in the alloy, but the heat treating process description does not indicate that. In fact the tempering happens at 210°F to 390°F and that is just above boiling water! Finally, cobalt in tool steel grinding always raises a red flag. Cobalt is a known and significant hazard and carcinogen in micro-particles, and accumulates in the environment and body. It cannot be destroyed. Extensive safety precautions have to be taken when grinding cobalt alloys because of toxicity. Why introduce this into my environment I would do this only if the superiority of this steel was extreme, and I don't see that. If a client wants a non-mirror polished extremely wear resistant blade, I would suggest CPMS30V or unbelievable wear resistance of CPMS90V. He'll curse me every time he tries to sharpen it, but that won't be very often! And he won't have any micro-particles of cobalt coming off of his sharpening stone to deal with, either.
NOTE! Some people have written me claiming their knives are mirror polished, and they are N690. They have even included photos. In these photos, you can see a reflection, but, like Böhler claims on their own information about their steel, the finish is hazy. One man's idea of a mirror is not another's. There is an actual scale of finish that is available to machinists, called surface roughness, and it encompasses a large scale of surface texture with a wide range of overlapping values. Typically, if there is a haze in the finish, it's not considered a bright or mirror polish. Again, Böhler even claims this on their own data about N690.
Back to Topics
L6 is a low alloy special purpose tool steel that I get asked about periodically. It's most frequently used on saw blades and in blanking, forming and trimming dies and feed rollers where toughness and resistance to shock loads must prevail over wear resistance. Toughness is resistance to breakage or fracture. So, you can imagine that a band saw which has to flex a lot would need to be tough. It has some applications in cutlery where that toughness is needed. Unfortunately, it has no corrosion resistance and quickly and easily rusts. So there is a large and looming problem here. Knives that require toughness, like fillet knives or knives that must spring and bend (e.g. kitchen cutlery) would do well to have the toughness of L6, but it rusts so easily that it is not a good selection for this purpose. Most modern knives have some corrosion resistance, and most knife owners insist on high wear resistance (usually higher hardness overall) so the use of L6 is limited. If I have to use a steel that can rust in a knife application, or must be blued, I usually opt for O-1 because it has tungsten and vanadium and has a greater hardenability and wear resistance than L6. For flexibility with high corrosion resistance, 440C is a much better selection, when tempered back for increased toughness and limited flexibility. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
CTS-40CP (CTS™40CP) (UNS 44004): This is powder metal technology 440C. Carpenter makes and sells this steel, and it's a good one, but has some limitations that currently prevent me from using it. While high in carbon, it's not quite as high carbon as 440C, so there will be relatively slightly reduced martensite and carbides overall. It has 16-18 percent chromium (a rather large variation in the specs that is a bit suspect), but let's just say it has as much chromium as 440C. It has a lot of manganese almost twice the amount in 440C, and this is not necessarily a good thing. Manganese is included in steels to reduce brittleness and improve forgeability, making the steel more ductile. Ductility is not desired in most knife blades. It does have more molybdenum than 440C, which is a good thing, since molybdenum makes the steel tougher and adds to molybdenum carbides, which are beneficial. There are several mild issues with this steel for me, and this means that I have better steels to serve the purpose, so I don't quite know what the advantage is in knife blades. The steel is very, very close to the alloy content of 440C, and technically by specification and UNS system, it is powder metal technology version of 440C. Carpenter avoids mentioning this on their data sheet, but if you've read my "Heat Treating and Cryogenic Processing of Knife Blade Steels" page, you'll know that these white papers are more advertising documents then harsh specification realities. It's possible that Carpenter knows of the bad rap that knifemakers give 440C, and don't want to mention it, especially since Carpenter claims on their data sheet that the steel is made for "specialty knife blade applications." Why wouldn't they just out and out claim that this is powder metal 440C They include the UNS specification of 44004, which is exactly 440C. They would probably get more business from the part of the knife trade that appreciates 440C if they did this! Additional curiosities are that they recommend passivation after hardening and tempering, which is strange, since 440C is about the most corrosion resistant knife blade steel made, only surpassed by N360, at least in the hard and wear-resistant steels commonly used in the knife blade field. Another curious thing is the relatively low tempering temperature. With proper processing (using cryogenics) 440C has a much higher tempering temperature set, and a mere 300 degrees Fahrenheit can affect the temper of CTS-40CP. Carpenter recommends shallow cryogenic processing, calling it "refrigeration" on their data sheet, which is a rather weak and non-specific word (and not the standard terminology) that I've not seen any other steel firm use. They also do not recommend CTS-40CP for salt spray exposure, something that regular old 440C handles well. So here's the rundown: If I want a hard, tough, 440C that is highly corrosion resistant, I'll use 440C. If I want a tougher blade (with more molybdenum) I'll use ATS-34. If I want a high tech powder metal technology steel that is is a bit less corrosion resistant and very wear resistant, I'll use Carpenter's CTS™XHP. If I want more toughness in a powder metal technology steel, I'll use CPM-154CM. There just really isn't any slot for CTS-40CP in the lineup that can't be filled with a bit better steel. Of course, Carpenter does not specify what happens in deep cryo, or with thermal cycling, or modifications to their standard treatment, so I may try it in the future, since I like to experiment!
Back to Topics
AEB-L (13C26, 14C28N): To understand this steel's wear resistance and longevity properties, know that this is a stainless razor blade steel made by Uddeholm. The other two trade names are for Sandvik (13C26 and 14C28N), and are essentially the same steel. This same steel is made by other names in many other countries (Japan, India, China and others). It's made for razor blades. Razors. This is not a new steel; the original patent was in 1928! It's not designed as a hand-knife steel, but just like others I list here and below, there are some pros and cons. First, understand that this is a hypoeutectoid steel; it has only .67 percent carbon. This is a relatively low carbon content. It's high in chromium (13%) so it has good stain resistance. So it's a low carbon, medium chromium stainless steel. There is at least one internet resource that compares AEB-L to 440B, which is totally wrong, woefully ignorant, and not even close! This is a lesser steel alloy than 440A! At least in 440A, there is much more chromium and some molybdenum! There are so many better steels on the market for uniform, homogenous, and isotropic knife blades. If you want a good stainless steel with extremely good wear resistance, why not choose 440C which has 1.25% carbon (twice the carbon) and 18% chromium It's tremendously more wear resistant and much more corrosion resistant. I believe guys are using AEB-L because it's cheaper, and easier to make a knife with. The good part about AEB-L is that it can be hand-forged. This means it's a popular steel for damascus pattern-welded blades, where it's hand-forged and layered with another stainless steel to make stainless steel damascus. In hand-forging this steel, there is undoubtedly some decarburizing and lessening of the alloy, but pattern-welded damascus is not made for wear resistance or longevity; it's made for looks, and in stainless damascus, it can look great. It's important to understand that by pattern welding AEB-L with 302 stainless steel, diffusion will create an even lower carbon content in the AEB-L, limiting its performance somewhat. However, it does make a very nice looking stainless damascus pattern-welded steel, and if you're set on stainless damascus, this is probably one of the best options. Don't expect it to perform as well as the hypereutectoid high alloys like 440C, ATS-34, or the powder metal technology group, but for pattern-welded damascus it can be nice. I believe that this is the only reason to use it, as by itself, it's a marginal knife steel. By the way, for the maximum performance of this steel, it has to be cryogenically treated, including very long (30 hours or more) cryogenic aging. When I do use it, it's all cryogenically treated for its best possible condition. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page. If you want to see some truly misleading comments about AEB-L, please look over this section on my Heat Treating page: AEB-L and Different Carbides as a Selling Point.
Back to Topics
19C27: To understand this steel's wear resistance and longevity properties, know that this is a box cutter steel is made by Sandvik, and is a substantial upgrade from AEB-L. In essence, it's AEB-L (or Sandvik's 13C26) with about a third more carbon (.95%), making this a hypereutectoid medium chromium alloy steel. Sandvik's own data sheet says that this is a steel made for box cutters; cutting cardboard, paper, fiber, and plastic. The issue with this as a knife steel is that although it's much better than AEB-L, it has the same limitations: mainly, it's far inferior to 440B, and 440C. Although it has the same amount of carbon as 440B, it has much less chromium and no molybdenum, so chromium carbides are less in 19C27, and there are no molybdenum carbides at all. One might suggest that it's inferior to 440A because of the importance of those chromium and molybdenum carbides, but this steel was not designed as a high alloy. The good part about 19C27 is that guys can hand-forge it. This means it's a popular steel for stainless damascus pattern-welded blades, where it's hand-forged and layered with another stainless steel to make stainless steel damascus. In hand-forging this steel, there is undoubtedly some decarburizing and lessening of the alloy, but pattern-welded damascus is not made for wear resistance or longevity; it's mainly made for looks. Just know that by pattern welding 19C27 with 302 or other austenitic stainless steel, diffusion will create an even lower carbon content in the 19C27, limiting its performance even more. But it makes a good looking stainless damascus, and I've used it before and will use it again for stainless steel damascus knife projects. I believe that this is the only reason to use it, as by itself, it's a marginal knife steel. A critical point is that Sandvik details a final retained austenite amount of 15%, which is a bit stunning (and large) and it must be cryogenically processed for maximum performance at that. Sandvik also recommends aggressive thermal cycling and conditioning, and it's doubtful that most pattern-welded blades are processed this way due to internal stresses at steel weld boundaries, but Sandvik is only recommending this aggressive processing for homogenous, isotropic blades. When I use it for stainless damascus blades, I actually do a deep cryogenic processing with long (30 hours) cryogenic soak and aging with deep thermal cycling between tempers. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page. When someone wants a stainless steel damascus blade, this is hard to beat, particularly if forged over a core of D2. Again, some loss of carbon in the D2 happens, but since D2 has so much, it still makes a great performing blade.
Back to Topics
15N20 is a steel made by the Austrian based firm of Böhler-Uddeholm. You'll see it mentioned and used a lot in the knifemaking community, which is a bit sad, since, by itself in a monolithic uniform structure, it is an low performer overall. It does have some use in pattern-welded damascus blades, where appearance is more important than performance. Böhler doesn't even list it in their "Knife Applications" section of their PDF white papers. Why Because this is a strip valve steel. Yes, the main and desired application of this steel is to make valves for compressors. It's also used to make reed valves, relief valves, explosion valves, flapper valves, check valves, diaphragms, and lamellas, used in industrial air compressors, brake systems, heat pumps, air conditioning equipment, vacuum pumps, refrigerators and freezers, and anywhere little pieces of metal need to move a lot. Know that this is a strip steel, a steel made by cold rolling, where the hot steel is simply rolled over and over to desired and often precision thickness. Then, it is machined either by stamping or even photochemical milling into a thin valve component, usually for compressors, where it is thin (strip, remember) that is made to flex and/or move over and over again in reed valves and disc valves. So the advantage of this steel is that it is a spring, made to flex over and over and over. It is not designed to be wear resistant, not near as much as the higher alloy steels, but is designed to be very flexible with only moderate wear resistance. It has 0.75% carbon, so is a hypoeutectoid steel, and it has a lot of nickel (2%). The nickel is there as an austenite stabilizer, making sure that a great deal of martensite is NOT formed. Heavy martensite formation in 15N20 would be a problem, as martensite is hard and brittle, so you wouldn't want much of it in a compressor spring valve that was expected to flex thousands of times. This is why Böhler claims it creates a "fine grained homogenous structure of martensite" throughout. The steel can't be made to create abundance of wear resistant structures (like carbides which are not even mentioned) because of the high nickel content. Nickel lowers the austenite temperature, and enough nickel can make austenite stable at room temperature. This is great for an austenitic stainless steel (like 304) because the softer, tough austenite is not metastable. But austenite is not a structure you want for a knife blade, which must remain hard and stable for an extremely wear-resistant cutting edge. These companies don't like to mention austenite, only martensite since that's the desirable allotrope. A huge advantage of this steel is that it is flexible, so would made a great bandsaw blade, as long as it doesn't have to cut through hard materials. Like L6, it can flex over and over without work-hardening and being brittle, but this is not what constitutes high performance in a hand knife blade. Like L6, it is not corrosion resistant at all, and will rust at the first opportunity in open air. Why use it for a knife I wouldn't as a stand-alone steel because there are so much better materials out there. Some knifemakers use it because being hypoeutectoid, it is easy to hammer-forge and hammer weld. It's commonly used to hand-forge into a damascus blade. It can be easily welded with 1085 or 1095, and because it contains 2% nickel, etching of the blade reveals a heavy noticeable pattern. The carbon steel (1085 or 1095) is etched away at a higher rate than the 15N20, and cold bluing solutions darken the carbon steels more than the 15N20 because of the nickel, and so a good visual contrast is achieved. So the only reason to use this steel is in pattern-welded damascus blades, where a lower performance is acceptable and appearance of a pretty looking blade is more important than durability, toughness, wear resistance, or performance overall. If I use it, it's because of this desired appearance, and not because of performance. And 15N20 should never be used by itself, as it only makes a medium to low-performance blade. It is a lesser performer than 1095 or 5160, and can't even be compared to an alloy steel like O1. So, for damascus it's okay, but for homogenous blades that need to be blued to prevent corrosion, choose O1 as the best performer, followed by 5160, then 1095, then 1085, with 15N20 at the bottom of the list.
Back to Topics
Nitro V steel isn't much of a performer; it's a stainless steel that rates in performance lower than the box cutter steel 19C27. It's a hypoeutectoid steel, with less than .7% carbon, and that's low indeed. The only advantage of this steel is its relatively high corrosion resistance, due to the nitrogen content and 13 percent chromium. It has very little vanadium—less than .08% which could be considered an inconsequential trace amount—and no other substantial elements that would give this steel any advantage in any way. So why is it made and sold Mostly, it's sold to beginning knifemakers, because it's easy to work. It's got plenty of manganese to help with that, which makes it easy on the maker for drilling forging, and grinding. The company that sells this steel talks it up like some great performer, throwing out a heavy advertising hyperbole fusillade that sounds good, but can't erase the relatively low alloy content. Not a steel I would recommend for …anything!
Back to Topics
ZDP-189 is a steel that hit the market with a big splash, and one of the major knife manufacturers has a lot of stock invested in this steel's performance. Unfortunately, some serious lessons can be learned here, mainly, that toughness of steel knife blades is just as importance as the hardness, and you can push alloy content too far for practical knife blade use. In the case of this high alloy steel, toughness is absolutely lacking, and Hitachi, who makes this steel, even admits this on their data sheets, yet goes on to contradict itself claiming it has "good toughness against chipping". This is typical of these white papers which are essentially advertising documents. ZDP-189 has a large amount of carbon (3%) which, on the face of it, sounds fantastic. This qualifies this steel as an "ultra-high" carbon steel alloy, which means a special applications steel, and not best suited for knife blades. It also has a lot of chromium (20%) which should mean extremely high corrosion resistance, but this is not the case, because the high carbon means lower corrosion resistance. If this steel is so great, why hasn't it caught on and replaced all other performance steels There's a simple reason, and it may help to read about steel alloy properties and responses of treatment on my Heat Treating and Cryogenic Treatment of Knife Blades page, but the gist of it is this: in ultra-high carbon steels, the steel can be made so hard that it is extremely brittle. Toughness is just as important a property in knife blades as hardness and wear resistance because properly ground knife blades must be made very thin, and extremely thin at the cutting edge in order to cut. So, no matter how thick and strong the spine is, the spine will support a harder, more brittle steel, but the cutting edge will not. This is the balance factor of knifemaking; making a blade hard and wear resistant, yet tough and fracture resistant. On ZDP-189, the result of a blade (typically) hardened and tempered to 66-69 HRC will mean a blade that easily and frequently chips at the microscopic cutting edge, in fact, dulling. If you do some basic research, you'll see that this is a common and well-documented problem with this steel being used on knife blades, and the company that uses it sells these knives for cheap. That is an indicator of over-hyping selected steel properties, ignoring other steel properties, in order to sell a new "pop" steel, which actually has lower performance value. Another seldom mentioned problem with this steel is that it's extremely heat sensitive, even after tempering, and can be tempered with boiling water! No kidding, blade tempering takes place at 212°F to 300°F, and any elevated temperature of this steel will ruin the temper. Since it's hard to sharpen, guys will put the blade against a machine sharpener to do the job, and this will instantly overheat the cutting edge, ruining the temper. Not to mention that this steel's temper can be ruined by being anywhere near a cooking device, and yet it's touted for kitchen use... you can not get this steel warm; it ruins it!
Just know that both 440C and ATS-34 have dramatically higher toughness, even at high hardness, and they don't chip, aren't brittle and are much better steels for corrosion resistant knife blades. Oh, yes, and don't forget that even with ZDP-189's higher chromium, it's less corrosion resistant than 440C.
Back to Topics
S7 is a shock resisting tool steel, and I occasionally get asked about it for knife blade use. Shock resisting tool steels are made with low carbon content (.5%) for increased toughness (resistance to breakage) at the expense of wear resistance. Please remember that all S-steels (S1-S7) have a very low wear resistance. They do not make good knife blades, and would need to be sharpened often. Shock resisting tool steels do have their uses, in example for air chisels, forming dies, casting dies, and shear blades. In my opinion, these are not good steels for knife blades that will need wear resistance at the cutting edge. Though some of the shock resisting alloys have chromium, they are by no means stainless or corrosion resistant. More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
CPM 3V: This is a steel made by Crucible Industries, and is considered a replacement for S7. What You heard it was the best steel for knife blades From Crucible's own data, this steel is designed "provide maximum resistance to breakage and chipping." This is a shock resistant steel, used for stamping and forming tools, powder compaction tooling, industrial knives and slitters, blanking and heading tooling, plastic injection screws, punches and dies, shear blades, and rollers, choppers, or any industrial use where heavy shock loads must meet good wear resistance. So why don't I use it for knife blades Currently, I don't, because of several reasons. First, this is a shock resistant steel. Since a hand knife is not an axe, it's probably not the right application for my knives. If I make a heavy chopping machete, this might be a good steel to use, so I won't rule it out in the future. Another issue is the lower carbon content. 0.8% is not much carbon, and 40 percent less than 440C! This means that a higher percentage of chromium and vanadium are used (7.5% and 2.75% respectively) to gain those critical carbides that will improve wear resistance. Still, only 7.5 percent chromium means this steel is not stainless, and will easily and readily rust. Since it can't be mirror polished due to the high vanadium content, the sanded or blasted surface would, by necessity, be even more prone to corrosion than D2. Since D2 has a comparable wear resistance, why not make a blade of D2, since it can be much more corrosion resistant, and finished to a higher degree With proper cryogenic processing and triple tempering and deep thermal cycling, D2's toughness can be highly improved, so it makes a more reasonable choice. The only reason to use CPM 3V, in my experience, would be for a very break-resistant blade that has good wear resistance but easily rusts and corrodes. Currently, there are better steels for the applications. By the way, the impact toughness that this steel excels in is about half of that of S7. Half. At least it's more wear resistant than S7. Industrial applications are not hand knife applications, so the knifemaker and manufacturer using this may be simply doing so because it's a relatively new option in the blade steel market. Another reason that knifemakers are fond of this steel is because a lot of them think that splitting wood (batoning) and making kindling is somehow the realm of a knife, while the rest of us use hatchets, rather than whale on our knife spines with a mallet or block of wood. In that practice, you might wonder what could happen if the knife breaks and a piece heads for your unprotected eyeball! More about these pesky specifics on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Back to Topics
SM 100 (Also applies to Talonite and Stellite) is a fairly new material, and it is not steel at all, but has been used to make knife blades. This is a material that has been way-hyped, and the claims of superiority are not totally undeserved. The material is actually a Nickel-Titanium alloy, and there are a few variations of this material used for different technical applications. There is a strong inference that the material is space-aged, tied to NASA, and superior in all respects to most other knife blade steels. If this were actually true, you would see all these other steels replaced by SM 100, in every application that is of any significance in industry, military, or medical and industrial applications. If it really were superior, all other metals would fall by the wayside. Since this has not happened, just what is the issue They are several, and one is significant and extremely important in the limitation for use on any knife blade. The sites, knifemakers, and one production knife manufacturer that uses this steel relies heavily upon vague generalities and snake-oil talk about this metal's properties, and repeatedly measure it against 440C the "gold standard in corrosion resistant ball bearings." They include no measure or comparison with CPM tool steels, and this is the first red flag in their advertisements. SM 100 was supposedly developed to replace 440C in ball bearings because it is lighter weight, has far superior corrosion resistance, and has higher wear resistance. This sounds, on the surface, like it would be the superior knife blade material, but it is not. It is extremely expensive, hard to heat treat, and very difficult and costly to make a knife with. But, for this discussion, let's ignore all of these factors, because they typically don't stop knifemakers from using any material, even the high cobalt steels and CPMS90V! Let's dig deeper into why this metal is hyped against 440C and what is not mentioned in the descriptions. The "ball bearing" comparison is valid; SM 100 will make a superior ball bearing set. But a ball bearing is not a knife, and this critical concept is the key to understanding the severe limitations of SM 100 and other similar highly elastic metals. What Elastic A knife blade How elastic is SM 100 You can bend a piece of it severely, and then when heated, it will spring back to it's original form. This looks fascinating to most people: a parlor trick or magician's hat would be well-equipped to exhibit the properties of this metal. This same elasticity is a severe limitation for a cutting tool. Please take a quick look at these numbers to understand why: SM 100 has a Young's Modulus of Elasticity of 47-90 GPa. This is a gigapascal, a measurement of pressure and what it is measuring is the force it takes to deflect a standard section of this material under tension or compression. In layman's terms, this can be understood when you look at elastic (the root of the name of the property). Elastic stretches, and contracts, and moves this way and that, like a spring. Where the fly enters the ointment is when this modulus is compared to tool steels. They typically have a Young's Modulus of Elasticity of 200 or greater, over four times larger! So it takes four times the pressure to deflect the metal; it's four times stiffer. The issue is at the cutting edge. The cutting edge of a knife is very, very thin and in order to be sharp it must remain very thin, ground at a low angle. So a thin area of SM 100 can deflect at one fourth of the pressure a piece of 440C! When you bear down on the thin cutting edge, sometimes applying tens or hundreds of thousands of pounds per square inch, instead of being stiff, SM 100 springs, deflects, and bends away. This is NOT what you want a cutting edge to do! The cutting edge must be stiff and strong, not weak and pliable like a spring. So how do makers and manufacturers use this stuff for knife blades without it deflecting (springing) away from the task They leave the cutting edge very thick, ground at the shape of a cold chisel, and consequently the cutting edge cannot be as sharp and thin as standard knife steels. If you sharpen it by thinning it down, you'll have the springy, deflecting problem again. Since most manufacturers send their knives out thick, this may not matter. But when you try to justify the substantial increase in price for this steel, only to find you cannot have it stiff when thin at the cutting edge, the whole application falls apart, which is why, I believe, it is not typically used on the finest high performance and high value knives. SM 100 will make a superior ball bearing at ten times the price, but a ball bearing is not a knife, and has no thin areas expected to remain rigid like a knife's cutting edge. I hope the explanation of the limitations of this metal are clear, as many other proprietary metals that are high priced, exotic, and overly-hyped also suffer from this issue, namely Talonite and Stellite. Highly acclaimed and touted for their superior properties, there is a reason that these materials do not replace tool steels in knife blades, and the industries that use cutting edges have not tossed standard tool steels aside for these exotic metals. Now you know what the companies and knifemakers who are selling these will not tell you.
Back to Topics
Amorphous alloys (BMGs: Bulk Metallic Glasses): These are touted as the latest, newest, greatest, and most technologically advanced metals made. At least, that is how they are marketed. Let's look behind the curtain, to see just what they are all about. The word "amorphous" simply means without form or structure. In metals, particularly steel, this is referring to the crystalline structure of steel and the allotropes formed, mainly martensite, cementite, pearlite, bainite, ferrite, and austenite. These are crystals, though they are so tiny that it takes a microscope to see them. Sometimes, the word "amorphous" is used to describe metals that do have crystalline form, and it's used as a sales technique, and it's just a lie. I've detailed this practice on a special section on this page: "Sell the Blade; The Handle's Crap!"
There is a correct use of the adjective amorphous, and these metal alloys are potentially new players in tooling. They can be made very hard, and thus wear resistant, just like cermet tooling inserts used in the machining trades. And, just like these inserts, they have limitations. They can also be manufactured to be very flexible and tough, as well, but the issue is one of balance. Unlike steels, they cannot currently be made both hard and tough, so they are either very hard and brittle, or very tough and elastic, and not wear resistant. There doesn't seem to be the fantastic balance of hardness and toughness that would push hypereutectoid high alloy and stainless martensitic tool steels out of their coveted position in the field.
These materials are technically called Bulk Metallic Glasses (BMGs). Here's why they don't currently measure up to high alloy martensitic and stainless steels:
- Glassine: One of the reasons amorphous metals are without crystalline structure is that the melted alloy is cooled incredibly fast, so fast that crystals cannot propagate and form. This creates a glass-like structure which is a metal ceramic or metal glass. While this sounds exotic and promising, the results are not so great when applied to knives. The reason is that, like ceramic-bladed knives, the alloy is brittle. It can be made fairly hard, but it is very brittle, something that is just not workable on a hand knife, which must have a very thin and tough cutting edge, resistant to chipping.
- Elastic: Some amorphous metal alloys are extremely elastic, and the companies that market them claim this is a great benefit. Unfortunately, just as with SM 100 alloy above, this is a negative in the hand knife field. No one wants a blade that has a cutting edge that bends, flexes, and springs away from the cut. The knife is a cutting tool, and rigidity is essential to cutting, particularly when high pressures are used. In a hand knife, many hundreds and perhaps thousands of pounds per square inch can be applied to the incredibly thin cutting edge. Some blades, like boning knives and fillet knives, may benefit from limited flexion, but not to the degree of being so elastic that they deflect rather than cut.
- Sharpness/sharpening: most of these metals can only be used in the as-cast form, that is, rarely are they machined afterwards. Because they are so hard, they cannot be effectively and reliably sharpened. Because the molds are smooth for easy extraction and no finishing steps, the edges are slick. So slick are some of the edges, they don't cut, but simply slide along the material being cut. This was such a problem in the past that tiny ridges were being put into the molds so that the cutting edge would have some "tooth" to grab and cut the material. Every cutting edge dulls, and once these blades are dull, they cannot be sharpened by the owner, and thus, are not practical from a user's standpoint.
- Molded and Cast: They are formed by casting, that is, they are melted an poured into a mold. Sometimes a hot, plastic bulk blob of the BMG is forced into a mold by pressure. This is the same process that is used to create millions of plastic parts, so there really is nothing special here, and that is why they are pushed in manufacturing industries, as automated and computer controlled casting machines do all the work; the operator just pushes the start button and walks away. The result is based on the mold itself. One wonders what die steel is used to create the mold for these cast pieces. Could the molds be high alloy hypereutectoid martensitic stainless steels
- Cyclic fatigue, thermal vulnerability: These are unfortunate and well-documented characteristics that these glasses suffer from (yes, technically and scientifically, they are glass). They fatigue and fracture under repeated applied localized stress (think cutting edge) and also are susceptible to failure in high temperatures. How high of a temperature are we considering Over 350°F would be highly detrimental to most of these BMGs, and that's not very high at all.
- Size: This is one of the most severely limiting factors of BMGs. They are limited to very thin, very tiny parts. So while a tiny skeletonized folding knife with a simple cutting edge of less than .100" depth and thickness may work, it's not really a knife you would want to skin a buffalo with, build a shelter with, use tactically, or expect to be a daily worker year in, year out in your kitchen.
Just as in the section, "Sell the Blade; The Handle's Crap!" on this page, there is some questionable and misleading advertising by a company selling a small folding knife with an edge of bulk metallic glass (amorphous alloy). They call this "liquid metal" and one wonders why. Could it be because it's poured into a mold No, then it would be called "cast metal," and that is not a popular or modern high tech term. More than likely, they might want you to consider the fantastic (and fantasy) material presented in Terminator: Judgment Day®, and Terminator: Rise of the Machines®, because, after all, that was really, really cool! I mean... wow: a liquid metal robot assassin! Cool!
By the way, doesn't the term "amorphous alloy" sound better than "bulk metallic glass" On their website (at the time of this writing), they are trying to sell an atrocious folding thing, all skeletonized and material-starved, a weird-looking small contraption of a knife with a bent bar that rotates around a big ring to slide along the cutting edge to protect the owner from it. It's a horribly designed knife, one clearly made in a computer program, and created by computer numerical processing, completely birthed without the consideration or input of a touch of a human hand, and it shows. Perhaps this belongs in the futuristic world of machines that the movie franchise created. Putting the overall design aside, lets look, just for fun, at their advertising claims to see the root of how they try to peddle these things.
- A ".0005" clearance between the blade and the protector," the bar that is supposed to keep your fingers from the cutting edge. Okay, so it's made by machine with machine tolerances. Not a lot to be amazed by here.
- A "barrel hinge" created by computer programming. Yes, we would expect as much from a knife that is clearly and obviously produced by a machine.
- The claim: "boasts as-molded 563 Vickers hardness (25% greater than 17-4PH stainless steel)" Okay, here's the first technical spec, so let's examine it closely, shall we The Vickers number sounds like a big one, eh, over 500 Not so fast. This equates to exactly 53 Rockwell on the C scale. This is soft. So soft is this that no hand knife I've ever made, nor any fine custom knife made by any of my contemporaries I've ever heard of has a blade this soft. This is very soft, perhaps too soft to use. They go on to compare it with 17-4PH, an extremely poor steel for any knife, with .07% carbon, a very low hypoeutectoid performer of precipitation hardening steel. 17-4PH is such a poor performer that it doesn't actually require a hardening-tempering regime, you just heat it up and air cool it and it's as hard as it gets, which is not very hard at all. How hard is this steel Try a Rockwell hardness on the C scale of 33-44! Yikes! This is softer than fully annealed and spheroidized stock from the foundry! In my world, we call this "butter soft." This is typical of advertising 101, use the biggest number you can find, and compare your product to a very low performer to make your product look better.
- The claim: "1524 MPa yield strength (twice that of Titanium)" Sounds great right What is yield strength It's the stress at which a material deforms plastically, rather than return to its original shape. So bend a spring, and it springs back, and when you bend a spring too far, it doesn't come back; it's bent. What in the world does this have to do with a knife blade Not much, I suppose. You don't want a springy-flexy blade, but just for comparison, a 440C blade will have a yield strength of up to 1900 MPa, and again, you'll see the advertising technique of using a lower performer as comparison to make your product sound better.
- The claim: "1.8% elasticity (four times that of hardened 420 stainless steel)" Okay, this one has me stumped. The issue is elasticity, which is measured by the elastic modulus, or Young's Modulus of Elasticity. This is a number, specifically in GPa (gigapascals) or ksi (kilo-pound per square inch), both units of pressure, and not percentages! So I don't really know what to make of this. However, they compare it with the absolute bottom-feeder of stainless steels; 420, the very worst type of steel that all cheap imported and mass-manufactured knife blades are made of, a stainless steel that can never be made any harder than 52C Rockwell.
From these comparisons, you can see that the bulk metal glasses (amorphous alloys) are really not quite up to snuff in the knife blade steel field. Perhaps, one day, they will improve; time will tell. They have a long way to go before they can compete with the fantastic hardness-toughness combination available in the best high alloy hypereutectoid and stainless steels.
Back to Topics
These are the main steels I use and some that are asked about, and I also use other specialty steels. I might add to this detailed description as time goes on.
Choosing a knife blade steel
A choice of blade steel does not need to be daunting task. Since all of the blade steels I use are fine tool and die steels, all high alloy well designed engineered steels, every component, every arrangement will be addressed by your knife maker. You know just exactly what you're getting, without a lot of hype and bull. So many confusing recommendations, suggestions, and so much hype is on the internet and in magazines about special steels that this has become a sore point with most knife buyers. Everybody hypes their steel, and nobody looks at workmanship, design, fit, finish, service, and accessories, much less the reputation of the maker. Look at my "Knife Points" page and you'll understand exactly what I mean. Most knife users will never use a knife brutally enough to actually notice the difference in performance, but of course, every knife client wants the best steel for his purpose and his money.
The chart below is a general guide only, and the properties of these tool steels can be adjusted in the grind geometry, and the hardening and tempering. All these high alloy steels outperform plain carbon steels, non-tool steels, or Damascus steels. As you can see, everything is a trade-off. If you want to go with D2, for instance, you will have a hard time field sharpening it, and it is very expensive, and does not have a good finish. You might want the added toughness and high heat resistance of ATS-34. For high art pieces and investment pieces, 440C is usually used, because of great corrosion resistance and finished beauty. Only O-1 in this list can be hot blued, and is easily field sharpened, but it rusts at the first opportunity of neglect. You might want the tough, hard, supreme wear resistance of S30V and S90V, only to find out they can not be mirror polished, so are not suitable for long term investment knives. Corrosion resistance can be very important if the knife is used in the field of combat or tactical operations around corrosive fluids or water. Remember, the edge itself can corrode, and become dull from corrosion. This is probably another reason why my most popular knife steel is 440C.
The chart demonstrates why there are choices, to allow the knife client and knife maker to reach an agreement on the steel's properties suited to the application. These are only my main steel types. There are other steels, of course, and I'll add their properties as I get requests.
Back to Topics
|Knife steel type properties (not a complete list, only predominant types I use)|
|Steel Type||Hardness||Toughness||Wear Resistance||Finish***||Corrosion Resistance||Ease of Sharpening||Price|
|O1||Very Good||Good||Good||Good||Very Poor||Easy||Moderate|
|440C||Very Good||Very Good||Very Good||Excellent||Excellent||Fair||Moderate|
|ATS-34||Very Good||Excellent||Excellent||Excellent||Very Good||Difficult||High|
|D2||Excellent||Very Good||Excellent||Fair||Fair||Very Difficult*||Very High**|
|CPM154CM||Very Good||Excellent||Excellent||Excellent||Very Good||Difficult||Very High**|
|CPMS30V||Excellent||Good||Excellent||Poor||Very Good||Very Difficult*||Very High**|
|CPMS60V (No longer Available)||Excellent||Good||Excellent||Poor||Very Good||Very, Very Difficult*||Very High**|
|CPMS90V||Excellent||Fair||Excellent||Poor||Very Good||Very, Very Difficult*||Very High**|
|CPMS35VN||Very Good||Excellent||Very Good||Poor||Very Good||Difficult||Very High|
|N360 ISOEXTRA||Very Good||Excellent||Very Good||Excellent||Excellent||Fair||Very, Very High**|
|*These steels can not usually be field sharpened properly, usually only sharpened by diamond abrasives or power equipment, sometimes requiring many steps|
|**These steels may not be available in the size suitable for all knives. Sizes and prices limit their use.|
|***Remember, a rough finish is not as corrosion resistant as a mirror polish! Some steel finish varies by manufacturer.|
More about this Hooded Warrior
Old Damascus steel is not new damascus steel, and Constantinople is now Istanbul.
A.D. 500. (or 500 CE, if you are being politically correct). This is about when it happened. In the Middle East, someone long lost to history came up with a special process for steel blades. There is a lot of discussion and uncertainty here, but steel making at that time advanced considerably, in several cultures, including India and ancient Persia. It's curious that at about the same time in Japan, tremendous advancements were made in sword technology. One wonders how travellers might have shared information about steel process, smithing, recipes, and designs in this crucible of the developing trade (pun intended).
The term "Damascus" may have been derived from two origins. One is the ancient Syrian City Damascus, which had been around since 3000 B.C., certainly very old by the time steel came along. Perhaps the name for the special steel came from the region it was used to make blades and armor. The second source could be the Arabic word for "watery" which is "damas." Historically, one sees the word referring to cloth, materials, and finishes, and it may well have been used to describe steel that had a watery, shimmering appearance in the steel surface. The process of creating this steel: the steel crucible recipe, technique, folding, and treatments are still hotly debated and will probably never be known for certain. This is somewhat humorous, because blacksmiths had made this steel for centuries, yet it is said that we are not quite able to detail the process today.
"Where did I put that instruction sheet"
Historians generally believe that the origin for watered Damascus steel was in wootz steel, an alloy used in Indian sword making as early as 200 B.C. They believe that the flat cakes of wootz steel made by crucible process in India were traded to Persian smiths who forged and treated the steel blades, creating watered steel with a fine, moiré silk pattern originally called Damascus. No matter where came from, the result was a big breakthrough. It resulted in a blade that could be hard and sharp at the cutting edge, and tough and less likely to break when compared with the blades previously made. This was because the steel had a lot of carbon, some up to 2%, making the result (if properly forged and treated) to be relatively high in martensite and carbides. Old Damascus steel is not new damascus steel, and Constantinople is now Istanbul.
Please understand that no matter how this ancient steel was made and forged, it is profoundly inferior to modern, isotropic, high alloy, hypereutectoid steels (and all other steels for that matter, simply by the cleanliness and control of the process). Modern tool steels may have high chromium (unheard of in the ancient world), high vanadium, high molybdenum, and high tungsten. Along with high carbon and low contaminants, they are extremely high in martensite, high complex carbides, and with proper cryogenic treating, are far superior to steels made even 50 years ago. Don't get duped into the ignorant belief that somehow steels of old were better than what we produce today. Modern high alloy steels are the most sophisticated, complex, and expertly engineered than they have ever been in history.
Of course, this discounts the ancient Atlanteans who made magical steel blades by humming and chanting, and shivering aplenty while they charged up their incredibly ancient cryogenic processing temples...
pattern-welded damascus is created for one reason, and that reason is appearance.
The watered wootz damascus steel is not what we refer to today as "Damascus" steel. Today, we are describing pattern-welded steel blades made of at least two different kind of steels, layered and folded and welded together. The patterns are designed, sometimes in special canisters and holding frames to preserve the artistic arrangement of the layers, and the blade is forged-welded, twisted, milled, and shaped, drilled, flattened, ground, and forge-welded some more. Modern damascus steels are usually heated in natural gas or propane forges, welded with wire-feed MIG welders, and forged with electrically powered trip hammers. Take that, you ancient bladesmiths! The stack of steel is formed into a billet, and these billets or bars are then used to make a knife. The knives are profiled, ground, heat treated and finished with additional processes like etching and bluing to reveal the striking patterns. Some of these are quite beautiful, and a choice for investment grade pieces not expected to possess high performance characteristics. It's interesting to note that in ancient Persian swordsmithing, a series of cuts or horizontal grooves were cut across the flat of the blade and then the blade was forged. This was called a "ladder" pattern, a name which remains to this day despite a totally different steel and layering effect and process!
Pattern-welded damascus is created for one reason, and that reason is visual appearance. This is a knife blade that is all about looks, and not about performance. The ancient idea that combining two steels would result in a composite blade that has the best features of both is not valid. If the knifemaker (or steel supplier) forges 1095 steel with 15N20, the resulting blade will not have the higher wear resistance of 1095 with the increased toughness of 15N20 to make some ultimate steel. What it will have is a pattern that can look cool, but the performance will be much lower that the best performance of each steel independently.
Let's take a closer look at this for illustration. 1095 is a high carbon steel, so can be processed and properly treated to be very hard, and thus substantially wear resistant. 15N20 has a lot of nickel (an austenite stabilizer) and can be only moderately wear resistant, but very tough. So tough is 15N20 that it is a spring strip steel and can be used in flexible applications such as compressor valves and bandsaw blades, which have to flex repeatedly. 15N20 isn't particularly wear resistant, and 1095 isn't tough. The "performance" idea is that by welding these two together, you would get the best of both worlds: hardness and wear resistance and toughness and fracture resistance.
The truth is somewhat less desirable. Each layer constitutes another weld boundary.
Welds are highly detrimental to steel characteristics, so much so that all of the machine tooling industry is directed toward having as few welds as possible, and eliminating all welds in any device made to perform in any mechanical way!
Forge welding (heating up metal externally and joining it by blows from a hand or machine hammer) has been almost completely replaced by better methods. This is because of poor weld characteristics, decarburization, carbon and element drift, recrystallization issues, heat affected zone (HAZ) issues, slag formation, crystalline imperfections, and a long list of problems brought about by heating two different types or pieces of steel in an oxygen-containing environment and forcing them together. To give you just one simple thing to think about, know that Henry Bessemer, the father of modern steel foundering, invented the process of blowing air into melted steel to remove carbon. Air is not the friend of molten, hot, or plastic steel. Since forge welding is so detrimental to steel overall, the only places most people see it nowadays is in hand-forged low carbon steel decorative furniture (incorrectly called "wrought iron) and in knife blades made for a certain look.
"The safety of my family depends on my vehicle with its wrought iron chassis."
One thing that is usually never discussed is the overall heat treatment (and hopefully cryogenic processing) of the damascus pattern-welded steel knife blade. Since each steel has a very strict and defined process (critical temperatures, hold times, quench rates, martensite finish temperatures, cryogenic aging hold times, tempering regimes and steps), what heat treatment is adhered to when there are two totally different types of steel This is another reason why performance of pattern-welded damascus steel blades cannot be compared to homogenous, uniform, isotropic steels. The pattern-welded damascus blade heat treatment can only be generalized, since it's not just one type of steel.
What about "micro-serrations"
This point pops up now and again, so let's look it over. The claim is that pattern-welded damascus, being made of two different metals, has different wear amounts because, at the cutting edge, there are different layers of steel. The different occurrences in contact with the material being cut will produce different erosion depths, and the softer layer will wear away more than the harder, more wear-resistant layer. This will create tiny little "teeth" or "micro-serrations" that aid in the cutting ability.
While this has a basis in simplistic and rudimentary physics, understand that this does not create "teeth." It creates rounded, worn, dull areas in the softer steel, and weakness as at the very position of the interface between layers, as the welded junction is being rubbed away. In effect, this weakens the steel blade at the cutting edge, since more stress in pounds per square inch is being put on the spot exactly where the weld is most vulnerable: the thinnest area of the edge. In cutting, this does not make the edge sharper, it actually makes it duller since half of the blade is soft, rounded, and dull.
Any actual "micro-serrations" of the cutting edge are created more by the sharpening stone used to sharpen the cutting edge, and this is what causes a blade to bite in, say, a soft tomato skin, whereas a smoother edge, though finer, would slip along.
The truth is, if this "micro-serration" argument were valid, we would see plenty of damascus pattern-welded blades in industry, as cutting tools requiring high cut rates and performance, and we don't. In fact, we see none.
The reason is not that industry isn't capable of making pattern-welded damascus; it's because pattern-welded damascus is weaker completely, with all those welds, uncertain boundary zones, diffusion, irregular and uneven formation of allotropes, and contamination of weld areas overall. Simply put, if Damascus pattern-welded steels created better cutting edges, all other steel cutting edges would be replaced in the machining, industrial, food service, medical, and military field. Instead, there is a reason high alloy steels are preferred and used, and it's because they are better performers overall.
"Nurse, hand me my damascus scalpel!"
When realistic function and a dependable and efficient result is critical, know that there are no superior pattern-welded damascus knife blades anywhere. If hand-forged pattern-welded steels were superior, you would see pattern-welded damascus tool and die applications, gears, ball bearings, valves, shears, or production tools. If they cut better you would see pattern-welded damascus scalpels. You would see the most demanding-use blades (think counterterrorism) in pretty layers and splashy, stylish patterns. You don't.
The reason you don't is that pattern-welded damascus steels are only about the pretty. As much as guys who make damascus knives deride mirror polishes and uniform finishes as being only about "pretty," this is a continual falsehood in our tradecraft perpetrated by hand-forging enthusiasts. Damascus steels are not about the durability, performance, wear resistance, corrosion resistance, or toughness together; they are about a certain look (the pretty). While they can be used to make hand-knives, the reason is decorative first, and decorative second. Performance not even a consideration; it's all about the pretty.
"NASA admits to using damascus ball bearings on the space shuttle's liquid oxygen pump."
I have made and use pattern-welded damascus steels myself, and am crystal clear that the performance characteristics of damascus knife blade steels is definitely lower than the performance characteristics than the highest alloy used in the damascus blade. The beneficial elements content of the highest alloy is reduced due to diffusion at the welds, and the mechanical arrangement of the layering offers some blade areas that are different in hardness and toughness than the other layers of different material. Microstructure in knife blades is extremely important, and it is utterly destroyed at the numerous welds and imperfections that are the result of pattern-welded steels.
Pattern-welded Damascus steel blades are popular, though the novelty from in the late 1980s and early 1990s has diminished somewhat. Perhaps this is because of the newer powder metal technology tool steels, or perhaps because knifemakers have improved their treatment of steels including cryogenic processes, or maybe it's because of this information and learning medium called the internet. Nonetheless, pattern-welded damascus knives are still desirable and some clients request them, so I use them when performance is less important than appearance. It's all up to the client, as long as they understand that they will be sacrificing performance for appearance.
I use several various types of pattern-welded damascus for blades, and they all have different characteristics, and different appeal. All are beautiful and have visual punch, which is the main attribute. The most distinctive characteristic of these steels is the high-carbon, low carbon aspect. While this can also be considered as high alloy-low alloy layering as well, it is the differences that are important in the character of the steel, it's use, durability, and most importantly, appearance. While other makers may use different pattern-welded damascus steels, I'll detail the ones I use and why.
- 1095 Carbon Steel and Nickel 200
This is a very bold and distinctive pattern-welded damascus material, chosen for its tremendous contrast when properly treated. The version I use has a majority of 1095 carbon steel, a steel chosen for good wear characteristics and dependable service. While it is not an exceptional steel from a performance standpoint, it still makes a decent knife blade when properly hardened and tempered and cryogenically processed. The advantage when using this steel in this type of damascus is that it can be deeply and darkly professionally hot blued, so can be made absolutely jet black using the sodium bluing process. When married with the layers of nickel, which has a very bright, shiny silver color, the contrast is perhaps the highest available in pattern-welded damascus steel blades (black contrasted with bright silver color). The nickel is alloy 200, a commercially pure nickel used in food handling equipment and electronic devices. Other bluing options are available, using nitrate based bluing salts for oxidized layer colors of peacock, cobalt blue, straw, and even vermillion. This is not heat colored bluing, which can be easily worn away, but actual chemical bluing process that creates an oxide layer on the surface of the carbon steel that helps inhibit corrosion resistance. The care for this steel is the same as for any blued, non-stainless steel: a light and continuous coating of wax, blade kept dry and clean.
- O1 High Carbon Tool Steel Alloy and A36 Structural Steel
This pattern-welded damascus material is made of layers of O1 for the high carbon tool steel component alternating with A36 which is standard structural steel. The O1 is an oil hardening alloy, and has high carbon, high tungsten, and high vanadium for high wear resistance, and is a great tool steel frequently used on many of my blued steel knife blades. The A36 is a low carbon steel without advanced alloying, and the contrast between the two steels can be beautiful when properly machined, hardened, tempered, etched, finished, and blued. It takes some work to bring out the pattern by etching and then selectively bluing, followed by regrinding to expose the different layers on the surface. The overall effect is a darker, highly textured knife blade with pronounced grain similar to wood. Care is the same as for O1, clean, wax, and keep dry. Oils can be used to bring out the contrast, but if they are used the owner must be diligent about their application and restrict over-oiling which can weaken and soften sheaths, some woods, an other adhesives used on stands, sheaths, and cases.
- 19C27 Stainless Tool Steel and 302 Austenitic Stainless Steel
This is a stainless damascus with moderate contrast. The advantage here is the high corrosion resistance of stainless steel. The tool steel component is 19C27, which is box cutter stainless steel. On some sites, you might read that 19C27 is the equivalent of D2 and this is totally wrong. 19C27 has moderately high chromium (13.5%), which is slightly higher than D2, making it a bit more stain resistant, but at the lower end of the true stainless steels. It is, in fact, a lesser steel than 440B. It has about the same carbon 440B, but much less chromium, so less chromium carbides are formed than in 440B when this steel is properly processed. It has markedly higher manganese, which is added for workability and allows this stainless steel to be hand-forged (into stainless pattern-welded damascus). 19C27 is a fair tool steel, though not near as good as 440B which is a much lesser steel than 440C. You might ask why I don't use it for uniform, isotropic knife blades, and that is because if I'm after a highly wear resistant and moderately stain resistant tool steel, I'll use D2. In this application, the 19C27 is welded with 302 austenitic stainless steel, a very high chromium, low carbon steel that is used in highly corrosion resistant applications. This damascus can then be etched after processing for a high textural contrast, as the 19C27 is cut away, leaving higher layers of 302 for contrast. Since this is made in small billets, it is not commonly used on large knives.
These are the damascus steels I'm currently using, and I may add to this list periodically. Please remember that pattern-welded damascus steels can be more expensive than homogenous tool steels on knives, sizes are limited, and the choice to use pattern-welded damascus is one of appearance typically on collector's knives. For those collectors and users of smaller knives that appreciate striking patterned blades, pattern-welded damascus can be a beautiful, attractive alternative.
In a previous iteration of this topic (Damascus steel blades), I described that ancient Japanese sword smiths would fold steel again and again to refine the grain direction of the blade, so it wouldn't break across the grain. I compared it to a piece of wood, where it would be devastating to have a grain run across the sword length rather than along it.
One person who didn't understand the idea thought I didn't know what I was talking about, and emailed me to straighten me out. He claimed that the "grain" in steel was formed in heat treating (austenitizing) and that it didn't matter how the steel was formed in layering, since, after heat treating, the grain was rebuilt. He was mistaken.
All rolled and forged steel bars exhibit directional properties, like wood. It is a well-known fact that tool designers and machinists know and deal with in their daily design of specialized tools. Steel has directional grain flow and blades, particularly, must be designed to resist major forces to avoid breakage parallel to the grain. This is one of the many reasons why steels are rolled over and over, aligning, compressing, and refining the grain.(Leed, SME, AFFT) This should have you thinking hard about the actual durability of non-linear pattern-welded damascus and blade strength problems...
A further consideration is that early sword smithing was so crude that the Japanese smiths knew that a layer of slag created on each layer (by oxidation and carbon drift) would resist or encourage fracture based on the direction of the layer. This is why they layered steels by folding repeatedly. They found that by continually reinforcing the blade by folding, they could inhibit the slag layer's ability to initiate a fracture.
It's important to note that an artifact of this is a layering effect, since the slag surface is not completely removed on early blades, as discussed by Prof. S. Ranganath and Sharada Srinivasan in scholarly articles. The layering effect grew to be a desirable feature in original blades, as an indicator of great skill, even though it was done because of a fault (surface oxidation, slag, and carbon migration).
It's important to understand that our high purity, clean processes of today were not available to the ancient smith, so he had to do the best he could, and that resulted in the many-layered blades of the past. You can't judge ancient blacksmithing on the standards and knowledge of today. Scientists didn't even know about carbon in steels before 1774!
Even in modern tool design, grain directional elongation must be considered for the highest resistance to breakage.
More about laminating blades below.Back to Topics
More about this Gemini
The process of layering nowadays is an artifact of historically necessary methods to achieve a high quality blade with limited resources, and has evolved into a way of cost cutting in the method of modern manufacturing process. It could also be a way to financially recover metal scrap from plate welding fabricators.
A creation of the ancient Japanese and Norse! Or if you're into the romantic version of things, the Samurai and the Vikings!
Layering and laminating of tool steels for knives is nothing new and even a few modern factories are using laminated steel blades, under the Japanese moniker of san mai, which simply means three layer. In Finland, Norway, and Sweden, this is a very old and traditional method of knife making. Typically, a hard, perhaps even brittle core of high carbon steel is laminated over with a lower carbon or sometimes stainless steel. This is supposed to make a hard cutting edge and a more flexible and tougher exterior. As the knife is sharpened, it is the inner core of steel that is exposed at the cutting edge. In ancient Japanese blades, other configurations were used; all were attempts to have a tough, resilient and somewhat flexible shock resistant blade that has increased wear resistance at the cutting edge.
Although these creations were adequate for the time and materials available, this practice was started in the past due to a poorer nature of tool steels available at that time. The combination of both hardness and toughness was not available in uniform, homogenous tool steel, so this modification was employed. There are some drawbacks to the technology.
- A hard blade core can mean a very brittle cutting edge. No matter how the lamination is applied, structured, or composed, no matter how the temper line (hamon) and differential hardening or tempering is done, the advantage is supposed to be that the cutting edge is left very hard and thus is wear resistant. So, obviously, the core is the layer that is exposed to the abrasive action and mechanical stresses of cutting. Although the outer laminations would be tough and less brittle, the actual cutting edge could be easily chipped if left very hard. And since the edge on a sharp knife has to be ground thinly in order to be sharp, the hard core is exposed to the most mechanical stresses, all the while being thin and more brittle than the rest of the blade. In order for the core to not be brittle, it may be tempered back, and this defeats the entire purpose of the hard core, tough exterior idea. The only option is to grind the edge at a high angle, like that of a metal cutting chisel, for increased cross sectional area and increased strength. Then, of course, the blade could not be as sharp. The ridiculous Hollywood notion of a blade splitting a taffeta scarf with the force of mere gravity is not realistic. More on the Sword, the Veil, and the Legend.
- Welding knife blades of dissimilar metals causes some drift decarburization. This will allow the higher carbon in the core to migrate to the lower carbon areas and lead to less than uniform crystalline structure of the steel and less carbon where you need it, thus less iron carbide, thus, less hardenability. A blade steel with less carbon has less wear resistance, which is more important than the decreased hardenability.
- Welding also changes the alloy components and their arrangements in the crystalline structure, thus affecting the original structure of the steel. The defects that this causes are the same as those in pattern welding damascus blades, detailed above. Welding dissimilar metals is almost universally avoided in most of industry because of these well-documented limitations. The main industry where different metals are welded is in plate welding, where a highly corrosion resistant surface metal, usually stainless steel, is plate welded to a stronger, less flexible core for storage tanks of corrosive chemicals, pressure vessels, steam drums, reactors, filters, and piping. These are not tool steel applications.
- If these blades were proven to perform superlatively, we’d see them used widely in current tooling technology and in modern industry, where the advantages of their performance would be demonstrably proven. We do not. Laminated blades are not the standard in critical industrial and highly abrasion resistant cutting tools; high alloy homogenous tool steels are.
- There is added expense of the process if done by hand, but for manufacturers, it's often a way to offer better performance for a cheaper blade cost. This is because a .0625" thick sheet of high carbon, high alloy tool steel is tremendously cheaper (less than one third the price) than the same steel that is .1875" or .250" thick. It may not seem like much to the individual maker who only constructs a couple dozen knives a year, but in manufacturing thousands of knives, this represents a tremendous cost savings. Bean counters like this method, as plate welding technology has dramatically improved over the last several decades. They can purchase a thin sheet of very good high alloy steel, plate weld it in a sandwich to lower carbon inexpensive steel, make the blade essentially thicker and more voluminous, and still have a hardened and tempered edge. It is not superior to the full thickness steel, only a cheaper way of getting there. Because the sandwich is softer, and doesn't work harden, it is more easily machined, milled, ground, and finished, cutting costs significantly. Could it be that the manufacture of San Mai is simply a way to cheapen the cost of manufacturing while touting some unique and historic advantage Could it be that some sources of this three layered material is the scrap of the plate welding fabrication of pressure tanks and storage vessels I'll leave that for you to figure out.
- Any laminations, layering, or welding operations create stresses in the blade that can lead to unreliability. Though I’m sure most of these blades perform well, they were forge welded in the process, and thus are subject to all the limitations of all welded blades like stress risers, pockets, and inclusions. These cannot be seen, and just like in pattern-welded Damascus steel, the level of trust in the knife is limited. I wouldn’t recommend one to the military or professionals for combat or tactical use.
With modern, high carbon, high chromium, homogenous, isotropic steels this combination of hardness, toughness, wear resistance, and corrosion resistance is well-satisfied and proven. This means a uniform blade structure of the highest tensile strength possible at uniform hardness and wear resistance throughout the blade. All surfaces are wear resistant, all of the steel is capable of holding a hard, tough, and sharp edge, throughout the life of the knife, even when the geometry is changed by repeated sharpening.
It’s my belief that this process of layering nowadays is an artifact of historically necessary methods to achieve a high quality blade with limited resources, and has evolved into a way of cost cutting in the method of modern manufacturing process. It could also be a way to financially recover metal scrap from plate welding fabricators.
With just about any steel manufacturing process, you have rabid supporters who are quick to jump to the defense of their particular favorite type of steel. Laminated steels have the same proponents, and from time to time I receive their overly enthusiastic emails proclaiming my opinion should be changed, and so should this very section on my website. That won't happen, but you may find some humor in the following:
One guy posted on a small bulletin board about knives that the use of laminates was widespread in the woodworking world, such as in chisels. These argumentative types keep me on my toes, and I had to consider it (for a few seconds). Tool steel laminate blades are used in specialty hand applications like chisels, and some hand planes because they can offer a cheaper version of a fine tool steel blade. If they were superior, you would see them used in powered planer blades and high speed, corrosion-resistant ball bearings, where real tools come into hard contact and high feeds and pressures with abrasive woods and metals at high temperatures. What do they make these cutting blades and bearings with Solid D2, 440C, and 154CM, the equivalent of ATS-34. The most long-lived cutting edges are solid carbide, but this metal does not have enough toughness to be used for a knife blade which must be thin.
Then, the guy mentions something about a catastrophic failure if a crack started in a hardened blade and the laminate would prevent it. What First, if you're cracking a hardened blade at the edge, you need to go get another tool, not a knife. And if you do crack the cutting edge, the knife is ruined anyway, so go get another tool. If you're worried about a knife being up to the task, and figure it might break, Go get another tool! These arguments are ridiculous, and usually only meant to challenge, stir controversy, and draw attention to the writer. And if you're cracking a blade, it sounds like it's too brittle, and the brittle core of the laminated blade is at fault anyway!Back to Topics
More about this Patriot
Machinists don't use mystery steels or secret processes.
I had a good laugh when I read a knife dealer's explanation about the steel chosen for use in a knife that was made by someone else to sell on his online catalog and knife site. He claimed quite literally that "our designation for this steel made with this special heat treat is..." Then, he goes on to describe how it was specially treated for the best possible toughness and edge retention. Really Like every knife maker and knife business in existence isn't heat treating their steel for the best possible toughness and edge retention-
Imagine any mechanical engineer ordering the steel to build a machine and not knowing what it is, but only reading some weak and vague claims made on a catalog sales site. Even food has a list of ingredients! Your clothes have a label that tells what they are made of! Plastics used in containers bear an SPI resin identification code! Other industries don't make this stuff up, why is this so common in knives
The disturbing thing about this, and something all knife clients should be looking out for is the special designation claim. There are no secret and superior steels, period. If a dealer, knife maker, supplier, or source is telling you this, they are trying to hide something. Steels and their alloy set, components, properties, and processing guidelines and instructions are clearly and plainly available through engineering and machinist's sources. There should be no secret to steel performance and processing, and there should be no "special designation" made up by a knife maker, a catalog knife dealer, or anyone who is not a metallurgist and does not have the certification, training, and approval of the numerous entities that regulate such things. The American Iron and Steel Institute (AISI), the American National Standards Institute (ANSI), the American Society of Mechanical Engineers (ASME), and the American Society for Testing and Materials (ASTM) exist for a reason, and establish the standards that all steels must adhere to. These designations are critical to understanding the properties of every material, and today, with the wealth of information available, there is no reason to deny a knife client, owner, and user the information about what he is purchasing. By the way, the term "designation" refers to the coordinated industry standard of steel designation established by the AISI and The SAE. Those designations are specifically listed above at this bookmark. You can't just make one up!
This doesn't mean that a steel manufacturer is prevented from creating an industry standard trade name for his steel, after all, he is the actual one making the steel, not the dealer, purveyor, knife manufacturer, or maker. In the steel industry, there are a bewildering amount of trade names created by foundries and steel manufacturers. In every case, these trade names are clearly accompanied by a chart or disclosure of all of the alloy contents of the alloy. This is because if the steel manufacturer wants to sell his steel to be used in any actual engineered project, he must clearly state what it is made of. If he is selling his steel to companies, individuals, and industries that intend to make something out of it (which is all steel sales, by the way), he must have a good detailed description on what the steel is, what it is used for, how to process it, and what to expect in it's performance. Therefore, beware of any steel designation or trade name, moniker, or title that is not accompanied by a clear list of the alloy elements and their percentages.
Imagine any mechanical engineer ordering the steel to build a machine and not knowing what it is, but only reading some weak and vague claims made on a catalog sales site. Even food has a list of ingredients! Your clothes have a label that tells what they are made of! Plastics used in containers bear an SPI resin identification code! Other industries don't make this stuff up, why is this so common in knives This has gone on for decades in the knife world, and it really needs to be stopped. The only way to do that is through education, and that is why you are reading this, I hope.
If there really were a superior performing steel, it would take over industrial process by storm, and the last thing everyone would be making from it is a hand knife. I've seen this over and over and it's a cheap and lame ploy, perpetrated so you think the knife is somehow special, while ignoring a non-bolstered, weak-framed, poorly made, lousy handled, awfully finished, uncomfortable, inferior, and badly made mass-produced item. Please read my "What about the latest miracle steel" section above.
- Know the difference between a trade name, and a steel designation, and where the term originates.
- Know the alloy content, which should be clearly disclosed.
- Dealers, knifemakers, boutique shops, manufacturers, and purveyors can't just make up a name for a steel to make it seem "special."
- If the knife client doesn't know what it is, it can't be trusted.
- Dealers, makers, and manufacturers do this in hopes you'll ignore the rest of the poorly made knife.
- When there is a made-up name for the steel, it is an inherently poor knife.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this Imamu
What about testing knife blades to determine performance and which steel is best This includes cutting tests performed by makers, manufacturers, and web-based testing sites. Read the entire page on Knife Testing at this link. After reading the page, you will know more than the public and probably more than most knifemakers or knife manufacturers about the entire subject.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this "Raijin" Counterterrorism Knife
This subject goes hand-in-hand with the previous subjects, and addresses the most prevalent knife sales practices used today to mislead, trick, and even lie about knives, all in the singular effort to get uninformed, ignorant, careless, or low information people to purchase a knife. The subject is false advertising, and it happens all the time.
There was a time when Madison Avenue advertising gimmicks were all the rage, when companies would pay large sums of money for the ad men to come up with catchy, short, punchy, and clever phrases to hawk their wares. It was like standing on a street corner, screaming at the passersby, hoping to get a little attention and have just enough of an advantage to make a potential customer (the mark) choose their brand over others. Typically, this is done with toilet paper, shaving cream, or soap, as there really is little difference in these products. They figured that if they could just plant a seed of brand name into the mark's mind, then when the mark was standing at the row of 40 different selections of the toiletry, they would simply choose what was stuck in their mind, rather than look for any real advantage or superior product or performance. This is fine for low end, similar, low cost, common everyday stuff, but how does this translate to knives
Because most companies consider the practice of selling stuff on the internet a simple carryover from text, television, and radio, they figure the same short, punchy spew will be enough to make their mark go to the effort to buy their products. So, rather than even make an attempt to produce and offer a superior product, they come up with a gimmick, a trick, a feint, a ploy, ruse, and outright hoax to sell their knives. This happens all the time, and it's time it was stopped. Thankfully, the internet does not run on a pay-by-word or pay-by-second advertising pricing structure. The internet is so different that it is literally revolutionizing the way people buy things. The internet is doing this in a precisely opposite fashion than print or broadcast media advertising. While the other forms of advertising purposefully neglect this factor, the internet, instead, puts it in the very forefront of consideration, and makes what was once completely unavailable to the customer the first thing the customer expects. That factor is information.
The web runs on information. In fact, it is the greatest information tool ever to exist, and it's exploding with a constant influx of knowledge, facts, points, opinions, and features. This is laying waste to other forms of advertising, and it's all because of information. No longer does a customer have to settle for a "best choice" among identical items, businesses like mine have a direct conversation with a customer to create just what they want. It's my job to answer EVERY question they may have, to give them all the information they require to help aid in their purchase, and this is the perfect medium for this. Still, companies try the quick hustle to sell their stuff, and knives are no exception to this.
Take the company that sells knives with blades made of what they call "amorphous metal alloy" knives that never corrode. Let's look into the information they don't offer to their potential marks, yes, I mean marks because they are being deceived. I'll go point by point to detail these tricks and misleading claims, and expose them for what they are. This is strictly informational, so you know from a professional knifemaker's experience how the public is duped into thinking these products are worth your money. Then, at least, you will have more information than when you started reading this section, and will likely understand the difference between solid, detailed descriptions of products and misleading, short, lacking and slippery sales advertising techniques.
They use the term "Amorphous" to describe the metal in the blade. Amorphous is a big word, but it has a simple, clear, and plain definition. It means without form. What The definition is strictly having no determinate form, formless, shapeless, irregular shape, without developed organization, an anomalous character or form. How do I make this clear What in the world does this have to do with a knife blade Okay, the only possible meaning here is that the metal is of a non-crystalline form. Because of that this materials is, (Titanium-Nickel alloy) we now know that the seller is flatly lying. Yes, I called them liars, because this metal does have a distinctive and characteristic crystalline lattice structure, and is not, in any way, amorphous! Still, what in the world does this have to do with a knife blade Nothing, that's what, not a thing, except using a big, technical -sounding word assigned to a material to make you think it's somehow more than metal, more than other knife blades, and tempt you to buy it.
They claim that this special material (just like the special designation topic above) was "perfected in space by NASA." Wow. Really Just what does that mean Does NASA now manufacture knives in space If so, this really attests to the misguided governmental organization's modern directives, as earth is a better place to make a knife due to the cost of lifting everything up there.
I'm sure you're saying, "Well, Jay, you know, it's just a phrase letting you know that this material is "space age" and modern. Really Just what is this material, and what is its origin and use They wont' tell you on their website, no, they want to mislead, misinform, hint, suggest, and influence. Please read this section about about not revealing a knife blade steel and why it should never be omitted. So what is the material A titanium/nickel alloy, that's what. What is that Simple, the same as SM-100, Talonite, Stellite. These are not good materials for knife blades, and I go into great detail in the linked section describing why. But let's go on to the advertising hype to tear it apart, and try to make sense of why they're making these claims and just what the claims are. They list five reasons to purchase their knives:
- Stronger: They claim that their material (Titanium/Nickel) is not brittle like ceramic. Just how is that measured Brittle Is the word brittle a new measurement of metals listed in engineering sources Is there an index of "brittleness" No, this is a vague and unspecific claim, plying on the hopes that when you read the word "ceramic" you'll be thinking of your mom's china plates, and how you dropped one as a kid and watched it shatter. They don't specify what ceramic they're comparing it to, just planting the seed in your mind that ceramic is brittle and this is not. Now I will state that nickel/titanium alloys are very springy. Springy, springy, springy, detailed in that section above. In their first reason (titled "Stronger), they claim that their "edge is six to ten times more durable than steel." What Where is the "durability" number of steel alloys There is none. Durability is a subjective measurement, and can encompass a bewildering number of individual interpretations. It's not a word that scientists and metallurgists use in anything but a general way, but here they actually throw out a number (six to ten times) that is done to make you think that "durability" is something that can be measured! What a ploy! And what kind of edge Edge geometry is a science in itself. To top it off, they don't even mention what steel they are comparing it to! There are literally thousands of different steels, made by thousands of different sources, with thousands of different arrangements and applications. Even the title of this "reason to buy" is a trick. What type of strength are they trying to compare Is it tensile strength, yield strength, compressive strength, fatigue strength, or impact strength These are specific, measurable terms that engineers use to compare materials, not simply the word "strong." They should be ashamed of this hype.
- Inert: They claim that because their metal is inert, there is no metal taste imparted to food. This is a good take on why you should not have and use plain carbon steel knives in the kitchen, but their statement is entirely misleading. First, there is the term inert. Let's get this clear; there are only six inert elements: helium, neon, argon, krypton, xenon, and radon. That's it. No more. Everything else can react with its surroundings and exposures. I've got acids on hand that will easily etch pure titanium, gold, and all stainless steels. However, let's forgive that ridiculous claim and hope that they just mean that the surface of the nickel/titanium will not react to most foodstuffs. Of course, they didn't use that phrase, that's not as cool as the word inert, which is, of course, a lie. So how is this metal different than any other stainless steel used in the kitchen Has your flatware imparted some flavor you didn't expect to your pasta Has any stainless steel blade ever imparted metal tastes to your food Of course not, and that is why materials like 304 stainless steel are approved by the National Sanitary Foundation for food service work and meal prep and service. Hey, so is that ceramic material supposedly inert to food. Their claim is then ho-hum, meaning little.
- Impervious: They go on to claim this third major reason to buy. They claim their blade does not corrode and greatly increases the durability and longevity of the knife. Let's be clear; this is exactly the same as the previous claim, "inert." This is because any reaction with another substance (food) would be in the form of corrosion, so there's really nothing new to claim here. Just to rehash old words, they throw out "durability" again, which is subjective and pretty much meaningless, since there is no scientific measure of the subjective and relative description of durability. They throw in longevity too, but every single knife and every single piece of stainless steel flatware, even the most poorly made, has high longevity. How long does most silverware last You'll only throw it away because it's scratched, not because you've worn down the tines of your forks and can no longer poke your pork chop! This then means that it will probably last as long as your flatware.
- Antibacterial: Oh, no, not the new age stuff! They go on to use the word holistic (really!) to describe the "glasslike surface that does not harbor bacteria like steel." Really What steel in particular I do agree that hammered, pitted, and damascus steel blades do not have a place in the kitchen because they are hard to clean, but what do you think operating room equipment is made of Huh It's made of stainless steel. I'll profoundly state that it does not harbor bacteria either, especially when cleaned with anti-bacterial chemicals or when it's autoclaved and sterilized. So, again, by not describing what steel is supposed to harbor bacteria, the ad copy is written to make this stuff sound superior to all steels. If their claim is true, why haven't they replaced all operating room and medical equipment with this stuff By golly, they could make a fortune, much more than simple kitchen knives would sell for. This, then, is a weak claim, and very similar to the two previous. By the way, do you sterilize your vegetables before you cut them up What No Not very holistic, are you
- Dishwasher safe: Okay, you can throw it in with your other stainless steel flatware, and clean it up. Unless, of course, you choose the wood handled model for $150 more. Then, you're back to hand-washing, or the wood will shrink and crack.
They go on with a bunch of testimonials by people who make unsubstantiated claims, innuendo, and suggestions, but offer no real substance. The knife is presented with a plastic handle, and they don't even tell you what the plastic is. They even call one plastic handle "jade," which appears to me to be a pale green acrylic or polyester. One of the most offensive comments is that this company represents "the most dramatic advancement in knife technology in 1000 years." Really If so, why aren't all industrial cutting tools replaced by this stuff Why aren't high pressure dies, valve seats, ball bearings, and shear blades replaced by this stuff Why are real advances like stainless steels, high speed steels, carbides, cermets, and powder metal technology steels somehow not worthy of note, when all these steels represent actual major advances in steel and materials technology that have been proven by decades of superior performance Why must this earth-shattering material be leaked out in relative trickles to the wannabe chef community for mediocre consumption at a couple hundred dollars a blade With no sheath, stand, case or accessories of any kind And a plastic handle of unknown material
Guess what This is a knife company that appears to have started on an internet project promotion site. You know the type: set a goal, heavy on the hype, promotion of unsubstantiated claims, a new mousetrap... and if it really was that good, you wouldn't need an internet donation fundraising campaign. Asking for donations and making misleading claims They should be ashamed.
Make your own decision, armed with information, based in reality.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.
Back to Topics
A truly advanced steel: CPMS90V in this Arctica
Blade geometry is most easily interpreted as the three dimensional view of the knife blade. Most often, the flat perspective is used in examining a fine knife blade, the same view presented in a photograph of the knife. You can see the grind profile, the general shape, the contour, and any additional agents such as serrations, clips, false edges, choils, and filework. This view, however, lacks the third dimension which is cross-sectional geometry. How thick is the knife How thin is the cutting edge Is the grind matched and balanced on both sides Let's examine some of these points:
The thickness of the knife at the spine (which should be the thickest, strongest part of the knife, not the handle!) must be strong enough to support the leverage applied at any point along the knife blade within reason. I accent reason because a balance should be met between thinness of the cutting edge and the weight and thickness of the spine. For example, you probably couldn't break a blade that had a spine of 5/16" (.3125" or .8 cm) thick. But this would be an extremely heavy knife (more like an axe, actually). Now, to put a fine, thin cutting edge on such a beast would require a deep hollow grind, or a long flat grind, and for proper geometry that would necessitate a very wide blade. Some makers actually make this kind of knife, so there evidently is an interest in them, but you won't find them on my site. Mountain man knives seem to lean toward this geometry. I've never met a man that used an axe to skin a deer, but I haven't met everyone...
The most important part of the knife's geometry is the cutting edge. It must be thin on most knives: thick enough to support the intended use, but thin enough to allow a low sharpening angle for aggressive cut. So the custom knifemaker walks a balance between strength and thickness, and sharpness and thinness. Learn more about thinness and sharpness and the cutting edge by linking to "Razor Edge Sharpening" on my links page.
For comparison, let's first examine the flat, taper, hollow, and convex grind. Here is a view of the cross-sectional area of the ground portion of a blade.
This graphic is a slightly exaggerated cross-sectional view of the four basic knife grinds. The descriptions below are linked to complete descriptions and graphics that describe each grind's type of cutting edge, longevity, and limitations.
The flat grind is an exact wedge. The advantages: easy to grind using minimal equipment, thin cutting edge, plenty of support for cutting. Disadvantages: as the blade is sharpened, the cross-sectional area quickly becomes thick, necessitating regrinding or relieving of the cutting edge.
The taper grind is a lightly convex wedge. Some guys call this a convex grind, and some call the grind convex when what they are talking about is the cutting edge shape itself. Advantages: used on a knife, a thin cutting edge, stout cross sectional area good for chopping, tough profile with plenty of meat (steel) to support the edge. This is the only grind suitable for a very thin blade (less than .0625"). Disadvantages: sharpening the blade in continuous use renders a thick cross-sectional area, requiring relieving. On a thin blade, this is okay, because in sharpening, the taper is ground away. Not a very attractive grind, it looks washed over. Many makers and manufacturers use this grind because it's one of the easiest grinds to construct. Any slack belt grinder or flat platen can make a decent taper grind.
The hollow grind is hollowed out by a wheel, the grind size indicates the circumference of the grinding wheel. Advantages: The hollow grind can be made incredibly thin, in fact, the sharpest of the blade cross-sectional areas shown. As the blade is sharpened repeatedly, the blade will remain thin well into a third or more of it's grind, sometimes half, without needing reground, only sharpened. Disadvantages: blade behind the cutting edge is thin, not much metal to support chopping or abuse, must be constructed with finer tool steels to support thin edge with toughness at high hardness. Special equipment and lots of skill required to grind and polish correctly.
The convex grind I refer to in this document is an axe grind, specifically referred to in this paragraph as applied to axes, large machetes, chopping tools over 3/8" in thickness. I'm not talking about a knife. Note: What most guys are calling convex today is a taper grind. If you insist on calling a taper grind a convex grind, please read the details on taper grind above.Back to Topics
Jay, the one thing you still can't get off of the internet is the way a knife feels. I wish anyone thinking of buying a Jay Fisher knife could hold Eridanus in their hands for just a few moments. Then there would be no doubt that buying a knife from Jay is the right thing to do. I've bought some other blades of the internet that photographed well, but when you got hold of them, they didn't feel or handle like much. Eridanus just feels like it belongs in your hand. You can get a knife anywhere, but this is a work of art. Thanks Jay.
Oh and by the way the sheath alone is worth the price.
More about this Malaka
Usually, the only owner maintenance that requires more than preservation of the blade is sharpening. Sharpening is not a mystical secret closely guarded by faceless men in dark robes hiding behind an altar of grinding wheels, angled rods, whetstones, and diamond files. It is simple geometry. The thinner the blade, the less the relief angle, the sharper the blade. The relief face is the flat, abraded line you see between the actual cutting edge face and the blade grind. So the knife user has to abrade away the metal at the relief face to keep the angle low, so his edge may be sharpened. For sharpening expertise, please check out the "Razor Edge Sharpening" link on my links page.
This graphic illustrates the initial geometry of a functional edge. Before an edge can be applied, the thickness of the blade must be relieved. The relief face is ground at a maximum of 20 degrees to the blade center line, and properly thins the metal behind the cutting edge. The relief face can be easily seen on the knife blade without magnification, and on knives with blade relief, this appears as a bright line of ground steel that may be 1/16" wide on a typical blade. Remember, the 20° is a maximum angle, and lower angles create a sharper edge and perform better, but are somewhat thinner in cross sectional area, thus affecting blade strength at the edge.
This graphic is a magnification of the relief face and the cutting edge face shown at their maximum angle. The actual cutting edge face is very small, and can not be easily seen without magnification. This type of bi-faced edge, with a 20° or less relief angle and a slightly greater cutting edge angle has been shown to be the most durable, serviceable edge.
Of course, the knife could be sharpened without relief face at the 30° maximum edge angle, but resharpening would require a great deal of time and effort, and the thinner geometry behind the edge may make the edge weaker.
Remember, these angles shown in the above graphic are the largest maximum for a cutting edge. A larger angle will create a thicker cutting edge, similar to a metal-cutting cold chisel geometry, which is what is frequently seen in factory knives.
More typical of the cutting edge on my knives is represented by the graphic shown here. Relief face angles are often 5-10 degrees, sometimes less, cutting edge face angles are 7 to 15 degrees. In order for low relief and edge angles to work, the blade grind must be significantly thin. This is where good grinding form, practice, and skill are demonstrated in handmade and custom knives. Factories and CNC machines can not grind blades that are thin at the edge. It takes a great deal of time, practice, and control, and can be dangerous for the inexperienced. Usually, factory knives are left thick, and are edged with one wide relief/edge face combination, which only allows a few sharpenings before the blade is too thick. Some makers and factories sharpen with a convex edge, which they sometimes call a rolled edge, because they roll the knife blade around while sharpening it. This is not a good edge because it is not clearly defined with accurate face angles, is thick and has high edge angles. and is not sharper no matter what you may read. The reason for a convex cutting edge is one of skill. It takes accuracy to create a cleanly beveled edge, and factories just round over the edges with power tools to quickly get the knife out the door.
For a definitive guide on sharpening the cutting edge, click on "Razor Edge Sharpening" on my links page.
So it comes down to the thinness or thickness of the relief. The thicker the relief, the more chisel-like the angle of the edge (bad), the thinner the relief, the more razor-like the angle (good). The blade grind geometry dictates the thickness, and there is a huge difference between factory and well-made handmade knives. When a knife user first purchases a factory or poorly ground knife, it may be reasonably sharp. What happens after he uses it, wears the edge, and sharpens it repeatedly will demonstrate why grinds are so different. How many times have you had a factory knife and complained that after three sharpenings, you can't get an edge on it because it's too thickBack to Topics
More about this Mercator
Every edge eventually dulls.
Take a look at the illustrations below, and you can see the differences in the size and thickness of the relief faces, and ultimately the angle of the cutting edge face, and which grind geometry supports the thinnest cutting edge.
The cross-sectional geometry becomes thick after several sharpenings, leading to large relief faces, and heavy blade thickness. Though the flat grind is very strong, the knife must be reground at the relief face repeatedly in order to maintain a thin cutting edge. Regrinding to make the blade thinner can usually only be done by machine as the relief face extends deeper into the blade, and the blade finish may be ruined. The flat grind is used often on thin folding knives and kitchen knives, and even then becomes thick after several sharpenings. Its advantage is that there is a lot of metal behind the cutting edge, and the knife lends itself well to chopping or high impact use. But because it's a straight wedge, it will often embed itself into materials like wood and stick there, unlike a convex or axe grind which splits apart the wood. It is also a heavy blade, with unnecessary thickness in the midline of the blade leading to the spine.
The taper grind is usually used on thin knife blades, .0625 (1/16" or .16 cm), or on false edges, clips, swages or knife blade components. You might also find this grind on thicker factory blades. Some guys call this a convex grind, but a convex grind is a typical grind found in an axe. See the previous topic. The taper grind is easy to grind and finish, and that is one of the reasons it's often hyped and recommended. It is far easier to taper grind a knife than to hollow grind one. The taper can be ground on a slack belt, or with an automated pass surface grinder under computer numerical control. This lowers the overall expense of grinding. Finishing is easier too, as crisp, clean defined grind lines are not made, so less skill is required to make it. You might read that the taper grind is preferred because it is stronger. Strength in the blade is determined by many factors, not just the grind type; see the topic below. In a taper grind, the grind is usually along the blade rather than perpendicular to it. This is how most factory kitchen knives are ground. When it is sharpened, it gets much thicker, but this is usually not much of a problem because it is used on thin blades. I use it on my thinnest blades, like fillet knives. It is not a grind for thicker or heavier knife blades unless you want to use your knife to chop down a tree.
It cuts textiles, wood, and foods adequately, but has much more resistance to cutting than a hollow grind.
The hollow grind is universally accepted as the sharpest, highest valued knife grind. Historically, the hollow grind has the highest value across many cultures. The deserving reputation is due to the difficulty of designing, constructing, grinding, and finishing the hollow grind accurately. If executed well, the hollow grind possesses the thinnest cross sectional area and allows a lower relief angle, smaller relief faces, and an overall sharper edge. As the edge is used up with repeated sharpenings, it remains thin, sometimes well into the midline of the blade, offering the greatest longevity of any knife grind. Because the blade steel is hollowed out, it leaves a fully thick spine supporting the blade for good strength, while reducing unnecessary weight. While it can be made thin and may not support heavy chopping, with careful planning, design, and execution by the knifemaker, can be made well enough for light chopping. For example, my military clients who require thin, sharp, but tough and strong blades for Combat Search and Rescue insist on hollow grinds. For investment knives and value retention and appreciation, the hollow grind is considered the most beautiful. It is a challenge to execute accurately and mirror finish well.
Because the hollow grind is usually thinner, it's easier to sharpen. Less time can be spent as relief faces are small, and there is less blade material to remove to bring up an edge.
Another important advantage of the hollow grind is resistance within the cut. When a knife is used to slice through tough, abrasive, or resistant materials, it is also wedged into the cut, creating friction. If the blade is thin, less material is displaced and there is less friction. A thicker blade (flat ground, taper ground, or convex) must displace more of the material in the cut, and therefore has greater friction.
Ultimately, the knife use dictates what geometry is used in making the knife. Only a handmade knife and custom knife maker can adjust his grinds and profiles to the individual user or style of knife. He can offer the variation, the diversity of materials, and the balance between geometry, hardness, and temper that each different blade geometry requires for the knife's specific use.Back to Topics
More about this Amethystine
The blade grind depth is extremely important, and if you are reading this page, you need to know how to recognize a poor grind from a good grind. Sadly, this is one of the most neglected conversations about modern knives, yet it is one of the most critical attributes to the knife function, durability, and longevity. It does not matter whether the grind is hollow, flat, or convex, good geometry should be in play, dictated by the use of the knife, the material, and the maker's skill.
Anyone who knows knives can easily spot this major factor in a knife blade's grind; they can learn to spot an underground blade from an overground one, and recognize amateur work and manufacturing from the work of a professional, often just by the grind depth. A good technique is not to look only at the grind area, but also at the spine area, and imagine the forces on this critical part of the knife blade.
The thickness of the steel does play a role in the grind line's placement. For instance, if a knife blade is very thin, you would not expect the grind area to be deep into the blade. This can be seen in hollow ground chef's knives that are 1/8" or even 1/16" in thickness, so at first glance, they may appear to be underground. Alternately, a very thick blade that is not wide may present as being overground, when the grind is adequate. This is why it is important to know the thickness of the blade, and for the maker to pass that information on to the knife client. If you are a knife client, you deserve to know all you can about the blade and the maker's reasons for creating it the way he did. Forget about factory knives; they won't tell you much at all about their knives.
Ideally, if the geometry is balanced, the maker of the knife should be able to use the majority of the blade width for the grind (or bevel). He should balance the overall thickness of the blade stock with the design pattern and grind area to create a balance between the size of the knife, the strength of the blade spine required for a particular knife, and the longevity of the knife after repeated sharpening. A good grind dictates the mechanical geometry, structure, format, and thus function and longevity of the blade, and speaks volumes about a maker's practice and skill. Here is how they shake out:
Note: the pattern design I chose for these drawings is my PJLT Kight, a fine and clear tactical knife with a swaged clip point blade. The drawings include a view of the spine from the top looking down, showing a tapered tang (essential on all well-made full-tang knives), the swaged tip, and well as the reverse side view. The drawings vary by only one component, and that is the grind line extending down the length of the blade, identifying the grind (or bevel) area.
- In the top drawing, I've illustrated and extremely underground knife. Okay, this is not a knife you use to dig holes! This is what many factories do when they are creating bad knives (which they seem to have a special knack for). The grind is extremely shallow, and does not extend into the blade thickness, not even approaching the midline of the blade width. You might consider why this is prevalent on bad knives. One reason is that to grind a blade thin at the cutting edge takes some skill. The thinner the blade is, the more likely it can dig into a contact wheel, catch a buffer or finishing abrasive system, flex, bend, or snag. So the first reason for doing this might be a safety concern. Another reason (more likely) is one that us older makers learned a long time ago. If you don't grind much off the blade, it can still be sharpened, but not more than two or three times, and then the blade has the thickness of a cold chisel. A knife user will claim that the knife is "used up," and may traipse right down to the store to buy another. If you have a knife like this, you know exactly what I'm talking about. Since, in order to get the knife thin again at the edge, it has to be reground, this is throwaway time. Some may claim that the knife is extremely strong because it has such a wide, thick blade, but this is over the top. If the knife needs that much blade flat, it's better as a shovel than a cutting tool. It reminds me of a Bowie knife I once saw that was three inches wide with a half inch grind. It probably took the maker ten minutes to grind that baby out, and he had an instant heirloom! Or he had a hammer with a chisel attached- Simply put, an underground knife blade is quick and easy to make, and has a short life.
- In this illustration, I've shown a slightly underground blade, not as severe as number one. The grind is a bit shallow, leaving a large amount of flat in the blade. This, just like number one, will mean a heavy blade, though combat knives tend to lean toward this geometry because it's features a wider, stronger spine. Very severe use knives may benefit from the meaty and substantial spine, but only wider blades can still offer plenty of thin grind area that can be repeatedly sharpened without using them up.
- In this drawing, the grind line illustrating the grind area is ideal. There is still a good portion of the flat spine area to support the blade, limit lateral flexion, and support the point while the deep grind will have many years or decades of sharpening before the knife is used up. A good balance is made between weight, strength, longevity, mass, and the essential thinness that enables the knife user to keep his cutting edge angles low and sharp.
- In this drawing, the grind termination extends up to the spine of the blade, and this is not a good thing. The reason is because there is no flat to support the spine along its length, so the spine will be weaker. This type of grind may be applicable on lighter duty knives with extremely thin blades, but it should not be seen on a knife for tactical combat or heavy duty service use, simply because a good portion of the thickness of the spine is ground away. If the knife blade got in a bind in use, where do you think it would break Right where the termination leads off of the spine, you can bet.
- This drawing illustrates an extremely overground knife. The grind termination extends through the spine, thinning the blade at that point. This happens because the maker is not paying attention, or he makes a mistake in his approach to the grinder, or he is using the wrong diameter contact wheel, or he is just so enthusiastic about grinding metal that he can't stop until the blade is nearly gone. Don't laugh, I've actually seen this quite a lot. I think that some guys try to sell these hoping no one will notice, when they should just bite the bullet and toss the blade in the trash. When a knife blade is overground this way, it will fail, an it will fail right where the grind termination lead off has thinned the spine. Remember that grinds happen from both sides of the blade, so the metal removed is considerable. One would not expect a spineless knife like this to even be offered for sale, but I've seen knives that are this severely overground as regular offerings from high dollar makers who claim they are suitable for combat! If you see a knife that is overground this way, you need to run the other way, and take your money with you, because the blade is weak and most certainly will fail if it has to do any real work.
So where do you want the knife to be Number 3 is nice, and on wider, stronger blades, number 2 works well (think combat knives). The only time you should see number 4 is in very, very thin and narrow caping, boning, and fillet knives. Think about the cross sectional thickness with lateral (sideways) pressure on the blade and you can visualize whether the grind is suited to the knife. Oh, and number 1 and 5 Don't, just don't.
If you see knives ground in a fashion that is peculiar, please, by all means, ask the maker or manufacturer to explain why they have ground them this way. The grind is not simply an artistic and personal way that a maker creates his blades; it has more to do with balance, longevity, strength, materials, and geometry. You have the right to know why a particular grind is created in your effort to find and own superior knives.Back to Topics
More about this Macha EL
Comparing factory knives to handmade custom knives is like comparing a hand-rolled Cuban cigar to a pack of cheap smokes.
I happened to see my name coming up in a popular knife forum on the internet, and guys were piling on defending their favorite knife blade grind geometry. They didn't like what I had to say on my site, and were fiercely defending their opinions. It's curious that rather than ask me outright to clarify my opinions, they chose to comment on a forum...
I felt compelled to respond:
Hello all of you who've commented. I'm sorry you didn't bother to just write and ask me to clarify some of my points on my website, but I do appreciate the traffic and interest.
When I write about factory knives on my site, I am talking about the cheap stuff, most of it coming out of foreign factories. If you have a personal favorite factory or boutique shop knife, by all means, purchase and collect those types of knives. Everyone has a different idea and desire in fine knives.
Most of you who comment here know a great deal more than the typical public. The public who is new to knives might simply want to know why a handmade knife is different, and why they may wish to spend their hard-earned money on a handmade or custom knife. Most of the knives they've seen are cheap foreign factory knives, and I'm simply describing the differences. If you're buying a knife to use up, abuse, and eventually throw away, that's one type of purchase. If you're buying a knife that will appreciate year after year, that's another type of purchase. The two are very different.
My information on my website is simply my opinion, after having made knives for many (30) years. It is my full time professional occupation and has been for over 20 years. My opinions are derived from having made knives for other professionals: military, police, chefs, collectors, and museums in my career and their direct input and feedback. These guys use knives more than I ever will, and I listen to, respect, and continue to build knives for them the way they request. That is what being a custom maker is all about.
If my views differ from yours, that's okay too! When I write about convex grinds, I'm talking about axe grinds. When you are talking about convex grinds on this post, I think you are talking about what us older makers call a "taper" grind. I think it's simply a difference in semantics. On my site, I do mention that I make taper grinds, too, and that I find them most useful on thinner stock blades. They do have a purpose, can be made extremely sharp, and if they are made on thin stock have great longevity. I've made many knives this way. I've also made axe grinds. Knives that are used to chop need to be made this way. Not all knife grinds are alike, there is no set standard guaranteeing one is absolutely the best grind ever. If there was, don't you think that all the other grinds would be discarded Any grind that has sufficient thinness can be made sharp at the cutting edge. Any grind. Any.
The point I'm trying to illustrate on my site is that as a knife is used up, sharpened again and again, more stock will have to be removed behind the cutting edge to keep it sufficiently thin. If the blade is thick, you'll simply have to remove more stock. A hollow grind is thin, so it may be able to be sharpened more often without spending a large amount of time and effort to removing or relieving the blade behind the cutting edge. I also state on my site that a hollow grind is not a grind suitable for chopping or high impact, though a hollow grind, if made well, can be strong. Most guys who use a knife professionally know that a knife is not an axe.
If I'm still entitled to my own opinion, I'll offer this: I know that guys can go on and on about the intricacies of grind geometry and complex angles, micro crystalline structure, wear characteristics, and steel alloy components, and these are important. My question is: are they also looking at fit, finish, balance, design, service, and accessories These are what I believe sets knives apart, in addition to steel type and grind shape. I think they are important enough that I've given them their own page on my site here.
Want to know more about obsessive-defensive knife owners I've given them their own section on my Business of Knifemaking page at this bookmark.Back to Topics
No matter how carefully the edge is honed, blades can be made sharp because they are thin at the cutting edge.
Any knife grind that creates a thin enough edge can be made sharp, and can be made to cut various materials. The shape of the blade does matter when it comes to cutting friction, and resistance while the knife blade is deep in the cut. Just what grind has the least and most resistance to cutting friction on the sides of the blade
I read a comment once where the writer had claimed the convex grind or rolled edge has less friction because it only contacts on a tangential point. This would be true if only the material being cut has no give, no movement, no springiness to it. Also, as that material is cut, it would just open up, not pinch, but contact rigidly at one single point. But just what material would that be
The fact that you are cutting instead of sawing means that you are not removing any material from the cut. In a saw cut, the teeth on the blade have a wider kerf than the blade itself, so that is why the saw blade does not stick and create friction in the cut. Knife blades have no kerf, no material is removed in the cutting action, so the material being cut will, of course, try to fill the cut, and push against the sides of the blade. The thinner the blade, the less friction and resistance. A taper or convex grind or rolled edge will push outward on the material being cut at a greater amount than any other knife grind cross sectional geometry. A flat grind will press less, and a hollow grind offers the thinnest blade and the least friction of any blade grind. This may seem like a small item, but in combat knives, where great force is delivered to the blade edge, and tough fibers, textiles, and tissue create great friction in the cut, any advantage is welcome. This is another reason nearly every military combat professional that I make CQC and CQB knives for requests hollow ground blades, whether the knife is straight, swept, or recurve in profile.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
Hi Jay, Sorry, not a 'serious knife purchase enquiry' at the moment. Just, what bloody amazing work. Your knives are art! Yes I'm looking, but I was actually doing a bit of research on ATS-34 ... (for a purchase, I'm not a knifemaker's arse) ... and found your comments during a search.
Okay, enough dribble. Just wanted to acknowledge what you already know, your work is a step above anything I've seen before, and I've been looking around for a long time.
More about this Calisto
This question comes up periodically on forums, discussion boards, and in knife conversations between knife enthusiasts and makers. The curiosity starts like this: a blade is sharpened. It cuts and the owner (or maker) can feel that the cutting edge is roughly tearing through materials, like paper, and the edge is compared with a second knife, either sharpened by someone else, or fresh out of a box from a manufacturer. The second knife seems to cut smoother, with less perceived microscopic tearing, and less chattering. The guy comparing the knife edges notices that they are made of different steels, and therefore concludes that one steel has more microscopic "tooth" than the other.
Some anonymous guy on a forum who claims to be an experienced metallurgist says that the size of a carbide particle of D2 limits how sharp a blade can get since the radius of a cutting edge is limited to the carbide particle diameter.
A maker or knife owner sharpens a bunch of knives, and in doing so, notices what he distinguishes as differences in the cutting edges, even though the knives have similar edge thickness and geometries, and then concludes that one steel must have more tooth than another. He throws the idea out to other knife enthusiasts, they begin to discuss the intricacies of grain structure, grain boundaries, bonding strength and they repeat it again and again, and even receive some agreement about the toothy issue. The comparison and evaluation persists, because, after all, he has experienced it himself and surely others do, too.
This is how myths get started and continue to thrive. Please, please educate yourself and don't contribute to myths in our tradecraft!
NOTE! I used to have the idea in this section describing a the size of a singular atomic particle, detailing the atomic particle radius, but that was a bit confusing for some readers. So I re-wrote it to describe and detail the size of an eta-carbide grain, something that is much larger, in hopes that a reasonable, grain-sized scale would make sense. After all, carbide structures do not appear as singular atoms, but in grains, so this would be a more practical scale dimension.
The cutting edge smoothness or roughness is determined by one thing and one thing only: the abrasive that was used to sharpen the blade. Carbide particle and other molecular structures are too small to be felt, determined, or noticed at a cutting edge! In other words, this question should sum it up: do you really think you can feel a singular crystal grain of steel
To understand this, one has to consider and understand the actual sizes of the molecular structure of the steel verses the sizes of abrasive particles used in sharpening. What is this person actually feeling: the abraded (sharpened) surface of the cutting edge, or the individual molecular crystalline lattices of the metal If he is claiming that the steels are different, he may like to think he is experiencing the differences in the steel crystalline structure, but is actually only comparing the differences in the abraded surfaces of the cutting edges. He is not and can not feel a crystalline structure of the steel. Let's compare the two for some clarity.
The metallic particle radius for an ultra fine eta-carbide is about 10 nanometers. This is small. Incredibly small. Tremendously small. The size of a typical (fine) India Oilstone grit is about 240 grit or 65 microns. Let's look at that from a frank and clear physics standpoint. 65 microns in grit size is equal to 65,000 nanometers . Yes, that's one thousand times larger than a single nanometer. Even if the molecules are grouped, we are talking about vastly different ranges of size, in completely different physical context.
From this simple, clear fact, it's obvious that the knife guy who says he can feel the structure of the metal particles when dragging it through paper is frankly wrong. What he is feeling is the abrasive sharpening particle sizes which leave peaks and valleys at the cutting edge, not the molecules of the material.
Let's go on some, since this concept seems to escape a lot of guys who think they know how to feel the molecules in a cutting edge. Here are some simple comparisons.
- Most bacteria range in size of .2 to 2.0 micrometers (microns). You can literally fit hundreds of thousands of them in the period at the end of a sentence (considering it is in a font size you can read.)
- An ultra fine eta-carbide grain of chromium carbide is about 10 nanometers, so the bacteria is about 200 times larger. If you could sharpen down to the size of the carbide grain, you could slice the bacteria into 200 pieces. Watch out, Streptococcus pneumoniae, I've got a knife!
- Five red blood cells could fit across the chromium carbide particle, end to end. One big white blood cell would occupy the same space as the eta carbide grain. I think I saw one sitting on the edge of my knife when I cut myself after sharpening last time!
- The smallest mold spores are about 1 micron. If you could make a cutting edge that was just the thickness of a singular row of chromium carbide grains, you could cut the mold spore into a hundred pieces with your knife. A hundred.
- You can not feel a particle of carbide any more than you can feel a singular bacteria, mold spore, or blood cell. The whole concept is just ridiculous.
Just for fun, let's see how fine a sharpening stone would have to be to affect a cutting edge at the level of the molecular grain of the steel blade. I'll use something we're all familiar with: the American Grit (AISI) Standard measure. It doesn't matter what abrasive I'm talking about for our consideration, we'll just assume that the abrasive will cut the steel, and we'll assume we can get this abrasive particle as small as we want (of course, both of these are horrible misconceptions, but that's another subject). 36 grit is pretty rough, and we'll establish our edge with a 60 grit stone. We'll follow up with a 120 grit, and maybe put a very nice edge on the knife with a 240 grit. This will be great for most cutting, and you can definitely feel a toothy hanging while cutting through a piece of paper. Of course, a sheet of paper is about four thousandths of an inch thick, and 240 grit is about two thousandths of an inch thick, so you can definitely feel the individual ridges and valleys of the sharpened edge while it rips through the paper as there are two of the valleys and ridges in contact with the paper at any given instant. You may be impressed by your tactile sensitivity, but this is not so astounding considering the actual measurements.
Now stay with me; I'm going to delve into this deeply and I don't want to lose you.
We're not satisfied with the edge, so we continue sharpening with finer and finer grit stones. We've got a great stone maker, perhaps from the orient, and he has magical skills bestowed upon him because his great great great (a few more greats) ancestor made a samurai sword out of steel way back in the 17th century, so he knows about these things... And he is willing to create stones for us in 400 grit, 600 grit, and 1200 grit. I know you're probably not impressed with this, you can find a belt from 3M® that goes that small. But then, he pulls out of his mystical sack a stone that is 3000 grit. You may be impressed, but I'm not, for I'm also a lapidary (in addition to knifemaker) and I can easily get diamond belts this fine. We sharpen our knife on this stone (after refining it on all the previous ones), and the edge actually feels dull! Yes, when we touch it, it feels like it won't cut anything, until we look down and maybe our finger has a slice out of it! By the way, this is now smoother and finer than any scalpel out of the sterile aluminum foil and paper package is, they stop at about 400-600 grit! When slicing through our paper, the edge now feels very smooth, with no tooth at all. It's slick and very sharp, and will deliver the best cutting possible, yet people will not perceive this as sharp, since it does not snag, hang, tear, or tug as the individual valleys and ridges are simply too small to feel.
But let's go on down there, down to where the guy who says he can tell the difference in steel types would live, down where the molecules are different (and he can tell this by cutting a piece of paper...ahem). Our mystical stone maker pulls out an 8000 grit stone, and we are starting to be impressed. But hold the phone; DMT® (Diamond Machining Technology) Corporation in Massachusetts makes just such a diamond stone for sharpening knives! Really! So our mystic scowls and pulls out a 14,000 grit stone and nods knowingly. Wait; I'm not impressed. I use diamond grit at 14k for my leather wheels to finish rock. So he sighs and pulls out what is perhaps the finest grit stone we have ever seen or imagined, and it's 50,000 grit. The lapidary in me smiles; I have one of those belts, made by 3M®, and it feels slick as glass. We sharpen our knife with it, an behold, we have a bright mirror polish on our edge. If we could do this, it would be enormously smooth. But still, it's not as small as the molecule so let's get our mystic working on the ultimate stone. He gives us a 100,000 grit. Nope, 3M® makes that too, and now we are about seven thousand times finer than our sheet of paper. That means that while the blade is in the paper we're cutting, there are 7142 actual ridges and valleys in contact with the paper at any given instant while we are cutting.
Are you getting this
How fine of a stone would you need to cut at the level of the individual grains Let's take a fine eta-carbide grain because that is one you would find in a well-made custom knife out of a high alloy tool steel. It's 10 nanometers. Our 100,000 grit stone is .25 microns. That's equal to 250 nanometers, which could mean that there are 25 grains of our eta-carbide across the thickness of the cutting edge. But we want to get down to one grain in thickness, just one of our smallest grains that you would typically find in a properly processed, cryogenically treated and aged high alloy chromium stainless steel knife blade. So, I need a stone that is .01 microns in grit size or a 2,500,000 grit stone.
That means that if we can sharpen our blade on this 2.5 million grit stone, there would be 101,600 ridges in contact with that sheet of paper as we cut it at any given instant. Yes, that's one hundred and one thousand, six hundred little teeny things that our guy thinks he can feel with his bare hand at the granular level in contact with the paper! Even if the knifemaker completely missed the heat treating, and the result was the larger 300 nanometer carbide grains, there would be 3386 grains in contact with the paper. And he could feel those as he drags his knife through
"Yeah, the edge was fine but I felt a big grain hang up at about the 2873rd position."
Maybe the guy is feeling the grains as they hang on the individual 10 micrometer diameter fibers of the paper!. Since there would be 1000 ultra fine eta carbide grains across each individual fiber; yeah, that's reasonable ...Sigh...
Do you now see how utterly ridiculous the claim of feeling tooth or carbide structure of different steels in cutting
It's the sharpening stone you're feeling, dummy.
You can't feel the difference in the molecular structure of a cutting edge.
What you feel is the sharpening stone grit size and technique.
It's humorous to think that there are actually stones that go down to 30,000 sold for sharpening kitchen knives, and there are guys scrubbing away at mirror polishes on cutting edges, but this is also total bunk and a waste of time. I'll get into that in great detail when I discuss actual working cutting edges in my upcoming book, but not here, I don't want to spoil it for you. Hint: there is a reason that scalpels are only sharpened to about 400 grit...
If you are a thinking person, and have understood this section, then you're probably already concluding that guys talking and writing about grain size, grain boundaries, grain bonding, and their effect on a cutting edge is not something they can perceive, not at all. And guys turning their cutting edges into a mirror are just playing at metal finishing on a microscopic scale. Unless they have an electron microscope and full access to a complete tribological equipment laboratory, they won't be able to recognize any difference in cutting via broken grains, un-bonded grains, boundary faults, interferences of individual crystalline structures, or any of the other ridiculous things people discuss when they ignore a badly designed, poorly constructed knife. These are the musings of guys who, if they really did understand knives and blades, would be much more concerned about the correct grind geometry to produce a worthwhile, durable, and long lasting edge on a knife blade that is reasonable to sharpen, the only service that a knife owner needs to perform. They would be concerned about carbon steel blades rusting and corroding in their food, not the fineness of the Japanese water stone on low-grade alloys with a beaten, dark, and pitted finish on the blade flats. But then, how would you appear more knowledgeable than others if you couldn't discuss knives with "grain boundary issues" Sigh...
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
Mr. Fisher, Thank you for ruining me. I was blissfully happy in my ignorance. Now through your fantastically informational website I have become a little less ignorant on knives, steel and what a true custom knife should be. Wow! You are an artist. Period. Knife, sheath, stone and photography are extremely difficult to surpass. I found your site doing a search on Buck Knives steel. I had noticed they didn't look or perform like my old, old, old ones. 420HC vs. 440c. Reading a few forums, I immediately knew I was reading opinions and bunk, not facts. Eureka!!! 440C a love hate relationship. Now I know facts. The knowledge I have gained in a short time has really, really been more than enjoyable. The carbide molecule sharpening too funny!!! Ignorance can be cured.
One day soon I hope to find the funds.
Thank you Sir. Chris Williams
Red Bank, MS
D2 Die Steel Blade on this "Vulpecula"
When someone says "razor sharp," they are comparing the edge to a hollow ground straight razor of old.
Yes, it's true, there is much more to the knife grind than the cutting edge alone. Please take some time to familiarize yourself with the terms on my Knife Anatomy Page. In my upcoming book I'll go into much greater detail, but the grist is this: the grind has a termination (plunge) and a lead-off (at the spine). These two areas are immensely important to the overall strength and usability of the knife blade and its longevity and value. The grind termination of a flat grind is often very squared off, as it is the easiest way to form this area. Guys even call it a shoulder which is supposed to justify their practice in squaring-off the termination, but nothing could be worse than sharp angles in this area! Also the shoulder is a completely different component on the tang of a hidden tang knife or sword, so the use of the word in this definition is sloppy and incorrect.
Think of how the grind termination is formed on both sides of the knife. If you have a deep grind which cuts through and removes most of the blade thickness at that point, the knife will be much more subject to breakage right there at the grind termination! This is why I think it's critical to have a gentle, curving, sweeping grind termination, so that stresses at this critical point are reduced, and spread over a meaty, thick part of the spine. By the way, nearly all factory knives have sharp grind terminations, leading to extreme weakness in this area. This is a simple artifact of the automated or unskilled effort to grind a knife blade and is a sign of a poorly constructed knife overall.
The second component is the lead-off. The most used part of a knife is the first two inches. The lead-off and how a maker handles this area is important to point strength, point sharpness, and point longevity. Please remember that the point is the weakest part of the knife. Any knife point can be broken. To prevent breakage, a lot of factories and makers leave the point very thick with a short lead-off. Sure, you have a thick point, the point is stronger. But what about after you sharpen the knife three or four times With a thick lead-off, sharpening will yield a cold chisel-shaped geometry and a poor cutting angle, which will make the knife user apply more pressure in the cut or piercing activity, and more pressure applied will hasten point breakage or slippage, causing a nasty accident. In order to compensate and thin the knife sufficiently, steel has to be relieved behind the cutting edge, and the profile shape of the knife can be dramatically altered when this is done.
Some makers tend to grind knife blades thickly, some grind them thin. I'm a fan of thinner blades, because of longevity, cutting geometry, and value. I do not recommend whacking down the oaks in your back yard with one of my knives, because a knife is for cutting, and an axe is for chopping. The modern knife user knows this, and often carries a small camp saw for just such a purpose.
Confusion about the grind termination!
It's clear that there is rampant confusion, misrepresentation (lies), and folly in consideration and discussion of the geometry of the knife blade thickness at the grind termination. By the way, I don't like to use the sloppy term "plunge," it's a verb, and not a noun, but it's as crude and non-specific as calling a thumb rise (where the spine rises to meet the thumb) a jimpy jump, or other such cutesy and guttural sloppy nonsense. Since when do handmade knives had jimping, anyway In the world of handmade knives, jimping is an outright lie, as jimping is defined as being done by a machine. More on all these pesky terms on my website definitions list.
Back to the grind termination: Let's call this area exactly what it is. It's the area where the grinder (the knifemaker) stops grinding (terminates) at the ricasso. This is a difficult area for most makers to establish and finish, as the sweeping, rounded form of the termination (the curve) is established in actually three individual directional controls, all offhand. No wonder guys just square it off with a jig and a flat platen sander; I get it; it's easier and faster with less offhand control or skill necessary. Consider that the skilled hand grinder (the knifemaker) has to match both sides of the blade offhand and it is easy to see an error between sides when each eye looks right down the point at the grind lines while rotating the knife. This set of curved and scalloped concave areas can't be completed with jigs and holders; and I'll describe the complexities and three axis and varying concavity control in my book. Since grinding it square (typical of disc or small belt grinding on a hardware store sanding machine made for wood), that will weaken the blade-to-handle junction (detailed in the topic in this section above), it's a tough area to grind and finish. What I didn't write about above is the grind termination's relationship to the relief, the actual cutting edge, and blade thickness between the choil and the edge. So, for all of you wondering how I've learned about this, hold on, I'm going to get a bit deeper.
The hand can do an amazing set of things, and I can tell within the first three knives if a new maker is able to establish the complex relationship of balanced force applications while standing in front of a grinding belt going 55 miles an hour. Oh, and he's got to switch sides and do exactly the same thing on both sides with opposite hands. The grind is all about generalized thickness behind the cutting edge. I said generalized because the hand cannot control like a machine, just close to it (if you've got a lot of skill and practice).
This generalized thickness is determined by the knifemaker. He can make a blade thick for strength, or thinner for a lower sharpening angle and a sharper edge. And in unique form, he can also vary the thickness of his blade along its length. Some people think that the thickness of the blade just behind the cutting edge should be as thin, uniform, and regular as a machine. Why Because then, it looks machine made, that's why! This is a stubborn concept and it's time it left our trade. There is a difference between a machine-made knife blade and a handmade one and this critical area is one place this can be demonstrated.
The knife owner wants as much cutting edge length as possible. This I've learned in over three decades of knifemaking; I've never had a guy tell me that the knife had too much edge length and to please make more of the blade length useless. By the way, any length of blade at the ricasso is useless, and history shows us that knives have been built for centuries that limit, restrict, or even repurpose this area because, frankly, it's not blade, and it's not handle. So, cutting edge length maximized is the first concern of the knifemaker who wishes to satisfy his clients needs.
Secondly, and most important, the reason a maker chooses to leave this area thick is one of strength. If the blade has a deep choil, it's easy to see why you would want additional thickness in this area, it supports a cutting edge at its very termination, the area that, unfortunately some call a heel, which really only exists on heel-shaped blades like big chef's knives. Because I know that this area of the knife can experience intense forces, I choose to make my knife blades thicker there, to add strength.
To the unaccustomed, this appears as a general widening of the relief, the area that is ground to establish the thickness behind the cutting edge. You can't hardly see the actual edge in most photos, usually only the relief. By the way, this is not some bevel; it's called a relief. This denotes increased thickness of the blade, because usually, the blade is relieved at the same angle along its length so that the owner can more easily sharpen it. This little thickening of the blade can even be seen on my tactical blades with serrations, indicated by longer serration cuts higher into the blade because the blade is thicker at this location.
This area is critical to blade-to-handle strength, and is second in concern only to the point. The pressures that can be exerted there are immense, and knife users always bear down there rather than the point, because the know a thin point can break. So I build them thick there, that is my desire and choice. If you've ever seen this area fractured, you'll understand why I do it this way. It creates a half-moon circle of broken-out metal, and the knife is then valueless and irreparable. I don't want to chance it, and I've grown to like the gentle curves and elegant sweeping nature of the relief width. Handmade, not machine-imitating. You can see it in just about every knife, like the one below. It's almost like the blade has a bit of a smile...Back to Topics
More about this Altair
Often, when knife owners get defensive about their knives, they leap to the time tested tradition of "my knife is sharper than your knife." This is rooted in the boy-child game of "my marbles are brighter than your marbles," or "my dog is bigger than your dog," or "my dad can beat up your dad." Their concept is that if a knife can be shown to be sharp: really sharp, scary, extremely, shiver up your spine sharp, you will be amazed, impressed, and awe-struck by the knife itself. Then, they can claim the grind, the steel, the knife is (of course) much better than others.
The method to accomplish this is always the shave the hair on your arm trick. They even call it "popping the hair off your arm," or claim the edge "just pops the hair off." This may be based on the concept that the hair is so terrified that it leaps off the arm in fear when it sees the knife blade coming, rather than suffer the certain severing with ultra-keen steel that will undoubtedly occur.
Any object or material of sufficient thinness and reasonable strength can be made sharp.
Sharpness and sharpen-ability alone do not make a valuable knife.
There is a great demonstration by a world famous sharpening expert (whom I greatly respect) of him taking a dull, double-bitted axe and honing it to razor sharpness in minutes, and shaving a full beard off his face. Yep, when I need a good close shave, I head to the shed out back and grab a shovel, hoe, or even a maul and take it to the bathroom with a hand full of Barbasol®. A retractable blade utility knife with a brand new blade is pretty sharp, definitely sharp enough to pop the hair off the arm or face, and I shave with those too, but not when I want to impress the in-laws visiting for the holidays.
I can take a piece of brass, phenolic, or china plate and make a cutting edge out of it. Some of the sharpest cutting edges ever in existence were obsidian flakes, and I guarantee they are much sharper than broken glass when flaked right. Ask any flint knapper what he thinks is a sharp edge, and your knife's cutting edge may cower in comparison. But does the edge alone make a great knife Of course not.
These are but a few examples of the obsessive-defensive knife owner. Want to know more about obsessive-defensive knife owners I've given them their own section on my Business of Knifemaking page at this bookmark.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this Desert Wind
Factories don't really know what you need to maintain a sharp cutting edge, and they don't even send the knife from the factory with a sharp edge. In fact, most people have never even seen a knife with a truly sharp cutting edge, and are astonished and frightened when they drag their finger over one. I've seen this again and again, and it's really sad. Mostly, factories use a fine, hard buffer and light abrasive to quickly rough in an edge, then out the door it goes. This they often call a rolled edge, and even boast (falsely) that is sharper than an accurately faced edge! It may seem sharp, but is easily and quickly dulled, and does not possess a geometry that will allow the user to re-sharpen the blade with any reliability, the only service the knife owner is responsible for. So the knife dulls, and a dull knife is a dangerous knife, because the user will apply more pressure to achieve a cut, and then he will slip. A slip is a knife out of control, headed at high speed towards a soft body part; most cuts are from slips. When you have a sharp knife, you're cutting carefully and slowly, you have great respect for the edge, and the experience thoroughly enjoyable. Just hand someone a sharp knife to cut their food, and watch their whole demeanor change. It is truly pleasurable to use a fine, sharp knife!
Your field sharpening will differ from my initial edging that I put on in the shop, though not by much. You can tell from the previous sections on blade and edge geometry and the relief face angle and the cutting edge that the proper angles are important. The first angle to define on the knife is the edge relief face, that is the removal of the metal behind the cutting edge. In the shop, I do this on a very slow speed belt grinder in two steps, my first cut is with a worn 60 grit ceramic belt, and a second pass with a 220 grit ceramic belt usually defines the relief face angle and cuts a clean, clear line.
More about knife owner sharpening on my 'Knife Care" page at this bookmark. For more advanced details about sharpening, please read my "Sharpening and cutting edge types; Refinement of sharpening by the knife owner" on my Knife Care page.
Edge relief in the field is more difficult and arduous. Some steels, like CPMS30V, CPMS90V, and D2 can not usually be effectively relieved (and thus sharpened) in the field. Diamond stones can help, somewhat, but if you're removing a large amount of the face, a tiny stone or diamond is not capable of this, and you're unlikely to carry a two by eight inch bench stone into the field. For handmade custom knives which are made from very hard, tough metals, you must bear down very hard in the initial stages in order to remove metal. There is a rhythm to this, and a lot more work than you might think. You'll see movie images of some chef whipping up an edge on a steel, and this is not how a fine knife is sharpened; it is how cheap (and soft) chef's knives are sharpened.
With fine, hard, blade steel, it takes a lot of work and careful attention to hone up a fine, razor-keen edge in several defined steps. You'll need a way to remove some serious metal: a coarse diamond stone, a coarse silicon carbide stone, or a slow speed wet grinder will do the job. Bear down hard, but not hard enough to bend or distort the blade or overheat it. A bright light helps. Keep the relief face angle as low as possible, without touching the spine or flat of the knife on the stone, or you'll scour the blade finish. Once completely relieved, you'll see or feel a burr of metal hanging on the edge. Now, you increase the angle by a few degrees by lifting the spine of the knife a small amount, and carefully start to sharpen. I like to use a hard Arkansas stone or hard, smooth ceramic stone for the final edge, and this is always done by hand.
The knife is pushed at an angle into the stone, and there is a definite rhythm. Control is the key here, you do not want to lift the spine of the knife and change the angle, or your work creating the relief face will be ruined.
Here are some pictures detailing the hand-sharpening of a hefty kukri. The instructions are the exact method I used to sharpen and maintain sharpness on every single knife. Note that the stone (this one is ceramic) is clamped in a vise for rigidity. You must have control of the sharpening process, and that means the stone must not move. Sometimes special benches are constructed with pockets to hold the stone and stop it from moving. But access to the stone at an elevated height works best for me, as the curvature of the blade may force me to have a hand below the level of the stone face. The steps:
- Grind enough of the relief face away to feel a burr on each side of the edge.
- Start defining the cutting edge with 10 strokes on one side, bearing down, then 10 strokes on the other side. All strokes start at the choil, and extend to the tip.
- 9 strokes one side, 9 strokes other side, bearing down
- 8 strokes one side, 8 strokes other side, bearing down
- 7 strokes one side, 7 strokes other side, bearing down
- 6 strokes one side, 6 strokes other side, bearing down
- 5 strokes one side, 5 strokes other side, bearing down
- 4 strokes one side, 4 strokes other side, bearing down
- 3 strokes one side, 3 strokes other side, bearing down
- 2 strokes one side, 2 strokes other side, bearing down
- 1 stroke one side, 1 stroke other side, bearing down (repeat this step ten times, decreasing the pressure on the stone each time until it's merely the weight of the blade)
The knife should be sharp enough now to glide through a single sheet of newspaper without sawing.
More about knife owner sharpening on my 'Knife Care" page at this bookmark. For more advanced details about sharpening, please read my "Sharpening and cutting edge types; Refinement of sharpening by the knife owner" on my Knife Care page.Back to Topics
Great Knife..such balance no hand fatigue and sharp too. With that knife in my kitchen. . . I am a surgeon--- not a butcher.
-- B. M.
More about this PJLT
Sharpening the inside curve of a khukri (kukri, khukuri), recurve, or concave profile knife is not easy, and this is one of the drawbacks and limitations to a recurve blade, since sharpening is the only mechanical service to a knife the owner must do themselves. You might be tempted to use the corner of the stone, but don't! The pressure and surface area of that part of the stone will dig into the blade, and gouge the steel, creating a wavy, irregular edge.
You must use a round ceramic or steel. I recommend the largest diameter ceramic you can find. This will be hard to find, because these are not commonly on the market. I receive emails all the time asking where these ceramics can be found, but I know of no company that actually manufactures large diameter tubes for sharpening knives!
Factories don't really know what you need to maintain a sharp cutting edge, because they don't even send the knife from the factory with a sharp edge. The sharpening market is full of gadgets, tools and devices, but very few of them are actually needed. I use a coarse stone, a fine hard stone, and a round ceramic for inside curves and recurved blades.
The round ceramic is used just like a stone, with the same angles for the relief face and cutting edge face. The knife is dragged across the ceramic, or the ceramic is drawn across the knife. you can see the metal streaks on the ceramic, and this shows that metal is being removed. The sequence is the same as the standard sharpening sequence detailed above. Here are some pics that show a 1.25" ceramic tube being used to put a final edge on the inside (concave) curve of a Khukri.Back to Topics
Are there different degrees of sharpness Of course there are. A scalpel has a completely different geometry than an axe, and the edge on a skinning knife is different than a combat tactical knife. A balance must be made between durability, longevity, and serviceability.
When I got into knives, I looked for the ultimate resource on the cutting edge. What I found was a man who had made a living for over 45 years as a sharpening consultant to the textile and meat packing industry. In industry, these guys don’t screw around. They don’t have time for confusing and mystical gimmicks or hyperbole. They must have the sharpest cutting edges, for the longest time, with a sharpening technique that is clear, maintainable, and very keen and effective. If you’ve ever seen the line at a packing plant, it is an amazing thing- the people are whipping meat off the bone at an incredible pace, and there is a reason they wear cut-resistant Kevlar gloves with wire reinforcement! In textile plants, razor sharp wheels, shears, and blades cut through thousands of miles of materials, textiles, and plastics, without snagging or tearing. This guy advised them on how to maintain their cutting edges.
His name was John Juranitch, and he wrote a good, short, concise book on what he knew. It’s called Razor Edge Sharpening and it’s available through numerous sources on the internet. I used to have a direct link, but since the sites change their URLs so frequently, it's best to do a search. Here's a link to my links page where you can get the correct information to find this book. This book is an absolute must have for every person who has ever or will ever sharpen a knife, and if you are reading this, you need to get this book. It blows away a heap of wives tales, myths, superstition, sales hype, misconceptions and outright lies about what it takes to create and maintain a sharp cutting edge on knives, axes, broad heads, and even fish hooks.
I have no personal or professional association or relationship with the owners of this copyrighted material, but I do have a lot of respect for Juranitch's work and his simple writing style. You'll find some complaints on the reviews of this book, and I'll suggest that you take them with a grain of salt. Take for instance, the comment that the book is "dated." Well, of course it is, it was written a long time ago; what older book would not be dated But the date of publication has nothing to do with creating and maintaining a cutting edge; this is something that is the same centuries ago and will continue to be centuries from now. Most of the complaints are about the writing style and the folksy comments, which have nothing to do with the process of sharpening a knife. News flash: this book was not written for its entertainment value, it's about a process that works.
It's interesting to note that many people complain about sharpening. Why it's not easy, why the latest gizmo, rack, machine, technique, and tricks don't deliver. This is mostly because of what we used to call in industry: operator error. Few people have the hand strength and motor control to carefully hold any knife at the consistent angle for sharpening in a long, drawn out repetitive motion activity like sharpening. It takes strong hands, well trained. So, rather than actually practice, they blame a technique, instruction set, abrasive, or even the knife. Mostly, it's the guy holding the handle. If you don't have good practice and good hand control and strength, don't expect any gizmo or machine to do this for you. It may be worth your money to have a professional sharpen your tools. If they do, they should be able to explain how and why it's done a certain way, and this is what Juranitch does in his book.
New steels and materials do not require any different sharpening method or edge apart from some of them requiring diamond abrasives to cut the harder and more wear resistant steels. A simple angle, consistent repetition, and a pair of strong man-hands are required. Machines will overheat the steel and screw it up, so will buffers and power tools. I'll have to put it in my video list to make a sharpening video; it's really very, very simple to achieve and maintain a razor keen cutting edge that lasts and is simple to re-sharpen.
By the way, I've never had one, not a single complaint whatever about any of the thousands of knives I've made over the last 35 years about the cutting edge: it's sharpness, its ability to be sharpened, and its cutting performance; quite the opposite, my knives are scary sharp. I think that stands for something; and that is how it should be!Back to Topics
I emailed you a few months ago and we exchanged a few emails. Still absorbing a lot of info on the subject. Also ordered the book you recommended on your site for sharpening knives by John Juranitch and am very pleased with the results I am getting. He also explains how to sharpen hand plane blades and that has come in particularly handy as I used to make furniture for a living and still do a fair amount to supplement my income. I thought my hand planers were sharp, but they are now on another level. Your website is quite a resource!
More about this Taranis
First, hones and steels: I do not recommend any steel hones for sharpening. First, steels do not sharpen, they merely hone an already established edge, and if the blade steel is good steel, the edge shouldn't need honed. See the details of steeling in Juranitch's book, recommended in the previous topic and available (at this link).
Honing is usually needed on softer and cheaper steel blades (chef's production factory knives), because the edge rolls to one side or the other (on a magnified or even microscopic level), or can become irregular. Steeling is recommended only for highly trained and skilled chefs, and with very light, surgeon-like, slow control because of the potential to damage a good, established cutting edge. And it is never used on a fine custom or handmade knife, because the edge does not need to be dressed like cheaper knives. Use only a fine, hard ceramic, Arkansas, or diamond stone to maintain a fine razor keen edge on the knife after proper relief. It's funny how over the thousands of years of metal blades, a hard rock (whether it be ceramic, natural, or diamond) is still the best way to keep a fine cutting edge.
Second, rods and gizmos: About rods and pinch style sharpening hones: there is a bad price to pay for point-contact sharpening of any kind. There are many types of these sharpeners, called mouse trap, m-sharpeners, v-hones, power hones, steel guides, triangular sticks, guide rods, and many others. I do not recommend any of them because the blade only contacts the cutting edge on one small point (where the steel or hone is), it can cut or abrade the edge away unevenly. By applying more force in this one tiny area, and no control spread out over a long surface of the cutting edge, eventually the edge will wear away unevenly, leading to a wavy edge. For proper sharpening geometry, you can visualize how uniform and even a cutting edge will be if the knife is drawn across a two-inch wide ceramic or diamond stone, with a lot of surface area to spread out the pressure while pushing the knife against the stone. A point contact device would be like trying to sharpen the knife on the corner of the stone; no matter the guidance establishing an angle, the high force in a tiny area of the blade will eventually create a wavy and irregular blade! A wide sharpening stone will preserve the edge along the length and keep it even. The only exception is the inside curve, where you need a wide, round tubular or cylindrical stone as listed above.Back to Topics
More about this Sirara
Most of us have seen a father, grandfather, or barber drag or whip a razor on a leather strop. Sometimes, these actions are so ingrained in our visual imagery of the knife that we associate the action with the profession and the connection between the two are anchored in media representations. If you see a man in a white smock whipping a straight razor across a wide leather belt, you automatically recognize him as a barber. But what is stropping and why is it done
Stropping is done to polish the cutting edge of a knife blade. Since very little abrasion occurs in stropping, it doesn’t really create or hone the cutting edge in an aggressive way. The edge, having already been ground and honed, may have roughness due to the coarseness of the stone used to put the edge on the knife. For more information on this read about the "tooth" of a knife blade cutting edge above. A hard Arkansas stone, for instance, is a very fine abrasive, but it does have some tooth and that roughness can be felt along the cutting edge. Stropping was usually done by barbers, prior to shaving a client because they want the edge slick and smooth, so that it glides through the hair without snagging it and pulling or tugging just before the cut
Stropping a knife blade is not necessary in most cutting chores, as it does little to refine an edge. Improper stropping can actually damage a cutting edge, because if the angle is not just right, it will round over the cutting edge, making it less specific, and creating a convex profile that can only be corrected by re-grinding and re-sharpening. So, stropping a cutting edge should only be done by well-practiced professionals.
You can read all the details about just what constitutes a fine cutting edge in John Juranitch's book (at this link). It’s a good, professional and simple text, and worth every penny.Back to Topics
More about this Macha Navigator
Heat treating is a specific process laid out in clear and concise steps for each type of steel.
The reason I started making knives is because when I was young, I heard about the secret of steel: the fact that steel could be heated and cooled at different temperatures and rates, deriving a piece of metal that was dozens (sometimes hundreds) of times softer or harder than a piece cut from the same bar. It amazed me and an old welder said, "If you want to learn about heat treating, make a knife."
Learn much more about this on my Heat Treating and Cryogenic Treatment of Knife Blades page.
He was right. I started annealing springs and "found" steel stock, and working on every piece of steel I could get my hands on: tungsten saw blades, leaf springs, old tools, files, and planer blades. I used exotic steel scraps discarded from machine shops, metal suppliers, and surplus centers. I used torches and my eye to determine temperature, quenched in olive oil, motor oil, gear oil, water, and brine. I used magnets to determine critical temps, and my eye to judge tempering colors. I tested with files for hardness, other knife blades for wear resistance, and a vise and a pipe to break the blades for grain inspection. I modified and built my own host of ovens and furnaces. I beefed up burnout ovens and added nitrogen diffusion inlets with high purity nitrogen applied through flow rate regulators and constructed multi-chamber furnaces with independent, low gas circulating, inert gas quenching chambers. I added specialized electric elements and converted my furnaces to rapid ramp, with some gaining 500° Fahrenheit a minute when empty! These are hot, fast, and clean units. I modified special freezers for sub-zero quenching, then moved on to shallow and deep cryogenic processing with multi-stage, multi-loop mechanical refrigeration and liquid nitrogen at 325°F below zero. I trained, learned, and trained some more, but the basic process is still the same. After profiling, the master grinds, the profile finishing, the filework, and the engraving, the holes are drilled, all milling is completed and excess material is removed from the blade. Then the knife blade is heat treated. It's heated to a stress-relieving pre-soak, brought to its critical austenitizing temperature, quenched to its maximum hardness through various steps, rates, and processes, and some are then brought to cryogenic temperatures and then aged. After that, the blades are tempered the correct amount of times, in specific sequence, with cryogenic thermal cycling when necessary, to the correct balance of hardness and temper for the intended use. The exact process is defined by the steel manufacturer, and fine-tuned by the knifemaker. After hardening and tempering, the blade is tested for hardness with a certified apparatus, finish ground, and then polished.
Learn much more about this on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Throughout my career, as I studied, I found was that there was an entire science of the crystalline structure of steel: how it forms entirely different allotropes and components based on metallurgy, mixtures, exposures to heat, cold, duration, and more. Tool steel is not just steel, it's martensite, bainite, austenite, ferrite, pearlite, cementite and carbides. It's carbon, chromium, silicon, manganese, magnesium, tungsten, vanadium, and sulfur. It is a complex scientific field of study and practice, and as a knifemaker, I'd better be knowledgeable about my field. I heat-treat specifically as the manufacturer requires, and modern tool steels are made in clean, regulated conditions, so that is how I treat them.
You might wonder why I do all my own heat treating and don't trust it to an outside contractor, as many knifemakers do.
- When you trust an outside contractor, you admit you can't heat treat a knife blade properly; that you don't have the simple skills, resources, and desire to handle this essential part of knife making yourself.
- You are at the heat treating contractor's whims as to timing. What if a military client needs a combat knife in a hurry You both have to wait on the heat treater.
- You don't know for sure that the heat treater is heat treating per the manufacturers recommendations, such as a long pre-soak at a specific temperature to relieve machining stress.
- Most heat treaters use a snap-temper method to make the treatment more convenient to them, but it's detrimental to the knife blade!
- You don't know that he soaks for the correct time at the critical temperature (or that he even reaches it!)
- How does he quench Does it produce stress risers in the blade at the precarious points like the choil and bolster pin corners Does he do and interrupted quench, or quench staging
- Does he perform a significantly long cryogenic aging
- Does he double-temper or triple temper for the right amount of time as per manufacturers recommendations
- Does he triple-temper some steels D2, for instance benefits greatly, as much as 20% greater in toughness from this!
- Does he do a deep sub-zero or extended cryogenic freeze between quenches or tempers to minimize retained austenite and enhance by thermal cycling
- As each manufacturer of tool steel has slightly different processes, how does the private contractor know all of them Does the heat treater ask for the brand, alloy content, and purchase date of the original steel billet He's not cutting corners or generalizing to make a buck, is he
- Does he set the temper depending on the blade grind geometry, the steel type, and the intended use or does he just set it at Rc58
- Can he and does he apply a differential temper, or a graduated temper, if the specific design requires it
- Does he test every single blade with a professional certified testing apparatus
Who knows if an outside heat treating contractor is paying attention to these items I trust myself to do this critical set of processes, not an outside heat treating contractor. That's why heat treating is the number one thing a knife maker should know and do himself.
Learn much more about this on my Heat Treating and Cryogenic Treatment of Knife Blades page.
I read on one forum where one anonymous idiot submitted that "Jay Fisher's heat treating is nothing special." This shows the absolute ignorance of the person who would post this. Heat treating is not some special inconsistent and ambiguous art, where individuals get to creatively modify times, temperatures, process steps, and handling of the blade depending on their mood. Heat treating is a specific process, determined by the engineers who work for the steel supplier, laid out in clear and concise steps for each type of steel. Heat treating is not "special," it is a recipe to be followed exactly to produce a specific result. When you hear that guys have some proprietary, exclusive, and secret method of hardening and tempering blades, you need to run the other way (tightly clutching your money). Do you honestly think that finely engineered products in the best military, industrial, and medical field are handled with mystery steps, secret process, or magical methods Okay, scratch the mysticism and ask yourself if you think that any part of this process is variable, changeable, erratic and whimsical.
Of course not; that's just ridiculous. Any machinist who works with tool steel knows that the manufacturer of the steel explains exactly how to heat treat the blade to yield a reliable and dependable result. It's a process, a set of instructions, and all good knife makers follow it to the letter, or the steel won't perform as it was engineered to. If a knife maker does not follow these steps, he is claiming that he knows better than the trained engineers who develop these fine steels, knows better than the thousands of machine shops that use them, knows better than the (International) American Society for Testing and Materials, the American Iron and Steel Institute, the American National Standards Institute, and the American Society of Mechanical Engineers. Do you honestly think that the tens of thousands of ASTM, AISI, ANSI, and ASME technical specialists and engineers have less knowledge about steels than a guy who makes knives That's why I follow the manufacturers' guidelines as all good makers should.
Heat treating is the number one thing a knife maker should know and do himself.
Learn much more about this on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Most heat treating companies who work with knives set the blade at one hardness: 58 on the Rockwell C scale. I have blades that range from 54 Rockwell C for heavy choppers that must be shock resistant and tough to 55HRC for springy, flexible fillet knives, to 56 for very thinly ground moderately light trailing point blades, to 57 for standard but thinly ground knives with a light cross-sectional profile, to 58 for many standard knives, to 59 for harder, thicker tactical models, to 60 for short and robust small folders and heavy-spined knives, to 61 for special-purpose cut-off blades for hazardous materials rescue and light metal cutting. I even have blades that are differentially heat treated and tempered, for a range of hardness along the blade. Where I set the final temper depends on three things:
- the manufacturer's type of steel and his recommendations
- the geometry of the grind and the cross-sectional area
- the client's intended final use
I can't see an outside heat-treater working with a hundred custom knife blades all from different makers knowing these details. Read more about the Rockwell hardness scale on the Blades page at this bookmark.
And factory knives Makes me growl. A group of USAF Pararescuemen brought me some factory made knives they'd been issued. They claimed that the edge rolled when used. I'd never seen such a thing, so I got permission to do a diamond penetrating hardness test on them. They were 100 times softer that they should be, that is, they weren't even heat treated! Then, a friend took one to a metals analysis lab, and found out the steel (which was marked right on the blade "ATS-34") had none of the percentages of alloy components of ATS-34. They didn't even know what the blade steel was! And this factory sells thousands and thousands of knives a year. By the way, there is no law preventing a factory from stamping anything on a blade (except gold "kt" marks). Read more about knife manufacturers, factories and boutique shops.
I know some old time makers who will tell you that unless you do your own heat treating, you're not really a knife maker. That may be, but many knife makers do not do their own heat treating. They like to boast that their heat treating is done by old so-and-so, and everybody knows he does a good job. Sure, there are some good heat treaters out there. Several can do a predictable job, producing repeatable standard results. I simply won't have my blades leaving the shop and not knowing what someone is doing with them. So, since heat treating is an extremely important part of knife making, I do it myself. I buy my steel from a reputable supplier, and it's done right here in the shop, it's tested for certainty, and it's done right.
Okay, unless you missed the link: Learn much more about this on my Heat Treating and Cryogenic Treatment of Knife Blades page.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
I've noticed that this page gets a lot of attention from knifemakers, and discussion goes on and on about knife blade steel, how to heat treat it and what to expect. This can get out of hand, with guys claiming to know special bonding structures of the grain, grain size and shape, and describing various methods to achieve certain invisible, unproven, and ridiculous results. Here's my take on this:
Heat treat each piece of knife blade steel according to the manufacturer's directions. THAT'S IT! You don't have to try to better their process; the foundry knows how they made the steel and they politely and effectively tell you how to heat treat it for the best performance.
All knife blade steels are not the same, even if given the same type designation! Since minor variations in the alloy content are certain to occur as a result of foundry process, as a knifemaker this is not your concern. Just heat treat the steel according to the manufacturer's directions.
Good grief, it's easier than baking a cake! When you bake a cake, you have to measure and mix the ingredients, and the foundry has already done this for you!
If, as a maker, you think that you have some better process than the steel supplier, please do tell them your discovery, maybe you can become a metallurgist or engineer. Also be sure to tell every machine shop and industrial manufacturer of machine tools, dies, valves, shears, forms, presses, and every other industry that uses the steel. Wait. Do you suppose that these professional industries already know how to achieve the best performance in their steels Then, who do they get their heat treating information from Could it be the supplier of the steel Ahem.
Just follow the steel supplier's directions.
I don't know how this could be simpler. And then spend some time on Fit, Finish, Balance, Design, Accessories, and Service, as these are the real limitations for most knifemakers today.
Hello Mr. Fisher, I just want to thank you a lot for writing your long detailed page on heat treating. After about 4 days of scrolling internet forums and such, your post laid it out the best. So relieved...!
Thank so much for your time... otherwise all the best!!
Thank you again- like finding the holy grail of treating that cut through all the floating opinionated stuff.
More about this Golden Eagle
Heat treating steel is not a secret, it is a process.
I always laugh when someone sends me a link to a factory knife page, where it's stated that they use a highly guarded secret process to heat treat their knife steel. Usually this is followed by a description of the steel in vague terms, and how it's special only to their company, and they alone can offer the benefits of this special steel, and secret, magical process for heat treating. They try to apply so much mystique to what happens to the knife before you get it, that you don't notice the poor grind geometry, the thin, weak blade or the thick, unsharpenable blade, and the lousy handle bolsters, guards, fittings and sheath. This infuriates me, and I see it time and time and time again.
Hardening and tempering are not closely guarded proprietary secrets. They are clearly defined by the steel manufacturer for the type of steel and the intended use. There is no mystery or drama to the heat treating process, just good, clean practice. See the detailed topic above.
How a knife is heat treated and the final temper is critical in the creation of a knife. A knife must be as hard as possible for a long wearing edge, yet tough and resilient so the edge doesn't chip or the blade doesn't break. It's easy to understand then, why tempering is in many ways so much more important than setting the initial hardness.
What is the correct temper It depends on the blade material, the cross sectional thickness, the type of knife, and its intended use. Most heat treaters set the blade at one temper: 58 Hardness on the Rockwell C scale (HRC). I have blades that range from 54 Rockwell C for heavy choppers that must be shock resistant and tough to 55HRC for springy, flexible fillet knives, to 56HRC for very thin ground moderate light trailing point blades, to 57HRC for standard but thinly ground knives with a light cross-sectional profile, to 58HRC for many standard knives, to 59HRC for harder, thicker tactical models, to 60HRC for short and robust small folders and heavy-spine knives, to 61HRC for special purpose cut off blades for hazardous materials rescue and light metal cutting. I even have blades that are differentially heat treated and tempered, for a range of hardness and temper along the blade! Where I set the final temper depends on three things: the manufacturers type of steel and his recommendations, the geometry of the grind and the cross-sectional area, and the client's intended final use. Every knife blade must be considered and handled with individual care and attention to process detail.Back to Topics
In a crude way, beginning knifemakers and hobbyists can use a file or saw blade and tempering colors to judge their blade hardness. But after years of knife making, I've found these methods are not only guesses, they can be outright false, leading to poor blade performance, short blade life, or worse, a brittle blade that snaps and can cause a nasty accident.
I read on one of the major internet sites an "authority's" description of the scale of hardness. Evidently, he thought that there was only one scale of hardness for all materials, and that it started with talc (1) and ended with diamond (10). This is wrong! That scale is the Mohs scale for minerals, and has nothing to do with the Rockwell hardness scale! Sigh...
There are several recognized methods to test metals for hardness, and thus durability. Since heat treating can produce a range of hardnesses on metals, each type of testing and each scale on those types are assigned by scientists' and machinists' reference sources for particular metals, uses, and alloys. Some of the major testing devices, tests, and scales are: Brinell, Rockwell, Shores Scleroscope, Vickers, Knoop, Monotron, and Keeps. We are concerned with only the Rockwell hardness test. The hardness tester is a machine that measures hardness by determining the depth of a penetration, and the penetration device and measurement scale we used is specific for tool steels, medium and high carbon tool steels and alloys. It is the "C" scale of the machine, so you will see the hardness referred to as "58C on the Rockwell scale," or "Rc58," or "58HRC." The penetrator used for knives in this device is a diamond point, though different penetrators in differing devices and materials may be used. Note: in the picture in the previous section just above, I'm using a portable tester: a tungsten carbide regulated spring punch as the penetrator, and a hand-held microscope micrometer to measure the penetration and thus, the hardness.
For more information, link to my Heat Treating and Cryogenic Treatment of Knife Blades page.
Mostly, in the studio now, I use the hardness tester pictured to the right. How the device works: The blade is placed on the anvil, and tension is adjusted to relieve play. A 10kg load is first applied, which causes initial penetration. The major load is applied (in the case of a diamond penetrator, I use a 150 kg load), and penetration occurs. Then, the major load is removed, with the minor load still applied, and the penetration is measured. This gives us an accurate reading of the exact hardness at the point of penetration, and thus the relative hardness and temper of the whole blade. The testing mark is usually placed where it won't be seen, since the mark is permanent in the blade.
Hardness testing may take place at many times, particularly in establishing a baseline of process if cryogenic treatments, multiple tempers, and various aging and timing steps are used. These baselines, carefully recorded and evaluated, gives the knifemaker a greater and specific understanding of each steel he uses. The hardness tester plays a large role in these process adjustments. Though the data sheets and white papers for each steel give an idea of hardness and results, these are only a rough guide, and I've found throughout the years that results can vary tremendously from these references. The only way to be sure of the individual knife treatment regimes is to accurately and frequently test each knife. This also assures the knives fit the maximum performance criteria that the high-tech alloys are designed for.
Though the hardness tester is a fairly common sight in complete machine shops, it is sometimes neglected. This is a fine instrument, capable of very accurate readings when properly maintained and used. For example, a slight deviation of the penetrator by the compression of a dust in the bearing surfaces of the anvil that leads to one millionth of an inch displacement can cause significant deviation of the final reading, and give inaccurate results. This is a delicate instrument and has to be regularly cleaned, calibrated, and maintained.Back to Topics
To get a rough idea of hardness relative to other objects and tools, here is a general guide for comparison, based on high carbon alloy tool steels
|General Hardness (Temper) of Tools|
|63HRC||metal files, engraving tools|| |
|61HRC||scrapers for brass, turning tools, hammer faces|
|60HRC||planing tools, twist drills for metals, finishing tools, razors|
|59HRC||milling cutters, boring cutters, screw dies, reamers, taps, punches, dies, cold chisels|
|58HRC||knife blades, gouges, plane irons|
|57HRC||twist drills for wood and brass|
|56HRC||augers, chisels for steel, axes, hatchets, adzes, needles|
|55HRC||chisels for cast iron, durable chisels, screwdrivers|
|54HRC||springs, circular saw blades|
|53HRC||wood saw blades|
Remember, this is only a rough guideline. Tool steels and alloy metals all differ, and there is no reason that a knife blade cannot be 60HRC in hardness, if the alloy will support the blade and still be tough (not brittle), and given the cross sectional thickness of the blade will support the intended use. Conversely, there is no reason a knife blade used for heavy chopping might be set at Rc55HRC, for added toughness and more resistance to chipping. It's about the alloy, the geometry, and the intended use.
Sometimes, I'll set a differing temper on one blade. I've used spine tempering, differential temper, and graduated temper methods where there are a group of differing hardness in the blade structure, for different effects. For example, a long, slender sword blade like a rapier might be tough and springy at the tip (55HRC), harder and more resistant to flexion in the center (57HRC), and very hard and durable at the ricasso, the thickest part that supports the handle and tang (60HRC). As makers, we are responsible for our decision and methods of heat treating and tempering, and thus, can set the specific hardness, toughness, and temper of the blade. With a properly equipped shop, experience, and knowledge of our alloys and blade construction, we can provide specific and exact performance standards.
For more information, link to my Heat Treating and Cryogenic Treatment of Knife Blades page.Back to Topics
More about this Seabee
There is often a lot of talk and a lot of confusion about toughness in this field. Knifemakers can endlessly discuss the merits of their particular steel choices (I can too!), and toughness plays a critical role. It's not enough to make a knife hard and wear resistant, it must be tough enough not to be brittle. No one wants their knife to break or chip, yet they want it to be as hard and wear resistant as possible. This is the ultimate balance concept and some makers and manufacturers think that this balance is derived from simply the steel choice alone. Choose the "right" steel and you get hardness and toughness together in some grand and universally superior combination, and can then forget about other steels, other steel properties, and even the knife type and geometry itself.
Denier's Rule 16: "High alloy steels are harder and wear resistant, therefore must be more brittle."
This Denier's rule is so often repeated (mainly on forums) that knifemakers and knife enthusiasts actually believe it. They go on and on explaining how hardness is somehow a problem, not understanding the entire relationship of hardness and toughness, when it's really very simple. The knifemaker can set the hardness and the toughness anywhere he wants within the capabilities of the steel. He can make an extremely hard blade that is extremely wear resistant, and he can also make a blade extremely tough and less wear resistant, but less likely to break. The knifemaker sets this relationship and balance; it is his domain and his responsibility.
A lot of makers like to justify why they don't like high alloy and stainless steels, claiming they are too brittle for use, and they are flatly wrong. The reasons that high alloy steels exist is because they excel in most characteristics (wear resistance, toughness, and corrosion resistance), and they excel in measureable and proven ways. Otherwise, they would not be manufactured, made, or used! Why even make high alloys unless they are superior Why not just opt for the cheap alloys and spare the expense Why would die and mold makers, cutting tool makers, and other real industries rely upon high alloy steels in the first place Worse, why deny the value of an extremely high performance blade to a client Why try to convince clients (and other knife enthusiasts) that somehow, lower alloy carbon steels are a better choice
Here's the really important point:
With proper geometry and heat treatment, high alloy steels excel in both hardness and toughness in every application.
Otherwise, they would never be made at the foundry, never used on any device or machine, application, or circumstance. Alloy sets would not continue to evolve and be developed, and we would be living in the late 1800s where the best steels would be hammered out on an anvil. Do you honestly think that modern metallurgy does not have a grasp on why high alloy content is important and beneficial Do you think the highest wear, highest toughness applications of tool steels are served by lower alloys
Let's look at toughness a bit more, since this is what some makers claim is a problem with high alloy steels. Granted, some steels are better used in high wear applications with limited toughness, and some steels simply can not be made hard enough for high wear applications, but it's in the knifemaker's domain and it's his responsibility to explain this to his clients and users of his knives.
- (general) Able to endure strain, hardship, or severe labor.
- (metals) The ability of a metal to deform plastically and to absorb energy in the process before fracture
As I've written over and over, there are many types of steels for a reason; they all have specific properties, and those start with the alloy content. Lower alloy steels are lower alloy for a reason (usually economy), and because the uses they are designed for do not require the more expensive higher alloy content, the higher cost of machining and working, and the higher cost of proper heat treating and processing.
But where, specifically does toughness fit in Are lower alloy carbon steels tougher than high alloy and stainless steels Does the mere existence of chromium or other alloy elements in steel knife blades mean a blade is by its very alloy, less tough No it does not, and it's time this misconception is cleared up.
When makers discuss toughness, they often make the comparison of carbon steels and stainless steels in a rough and indeterminate fashion, making claims that lower alloys are by nature of their elements tougher, which is in error. They do this because they think that higher alloy content which can result in a blade that has high hardness and high wear resistance is therefore more brittle. A more brittle blade is more apt to break, so the hardness-toughness pendulum must swing in favor of a lower alloy when toughness is paramount and desirable. This is a zero-sum game and is a fallacy. The increase in wear resistance of higher alloy steels is not just derived from high hardness; it's derived from carbides, martensite, and the structure of the steel. Substantial gains in hardness and therefore wear resistance does not, by necessity, mean a high alloy blade is less tough. In fact, most of the high alloy hypereutectoid stainless steels are also much tougher than the lower alloy carbon steels, even at higher hardness! Add to this the misperception and confusion about how proper Heat Treating and Cryogenic Processing of Blades also increases toughness, and it's easy to see why they are confused about toughness.
Frequently cited for example is a sword blade which must be fairly tough and somewhat springy, so that it will flex without breaking or chipping. It doesn't help to see a frequently linked YouTube video of a cheap Chinese attempt at a sword, breaking when slammed into a table, but this is not how the best knife or sword blades are made. Yet these anecdotal demonstrations of poorly made junk are frequently used to bolster arguments by the ignorant, because after all, a video is easier to look at than reading and study, which requires interest and critical thinking.
On the surface this poorly percieved "toughness limitation" of higher alloys seems to make sense, but let's look a little closer. Toughness comparisons are somewhat relative, and there is a lot of confusion about what constitutes strengths, durability, and performance in steels. Knifemakers seldom consider critical performance studies, scientific articles, and scholarly research, and yet claim to know what is simply the best steel for the knife based on their own preferences. I'll flatly claim that their preferences are chosen because of their own comfort and familiarity of their steel experience, and this does not translate, necessarily, to a benefit for the client. As a professional, this field is about the client, not the maker, and that is why I try to work with many types of steels to offer a wide variety of options.
Toughness is not a singular concept, and that is the first consideration. Metallurgists consider stress-strain curves, moduli of elasticity, stiffness and failure rates for an incredible amount of steels to determine their performance value, and though knifemakers are only usually considering a few of these applications, it helps to understand a bit about how they all interrelate.
When knife people discuss toughness, they must, by necessity include the discussion of ductility.
- capable of being hammered out thin, as certain metals; malleable.
- capable of being drawn out into wire or threads, as gold.
- able to undergo change of form without breaking.
- capable of being molded or shaped; plastic.
- most importantly in this context: In materials science, ductility is a solid material's ability to deform under tensile stress; this is often characterized by the material's ability to be stretched into a wire.
Ductility is the measurable ability for a material (steel) to deform before rupture under tensile deformation. Consider a wire that is stretched until it breaks. it moves, it deforms, it's bent, strained, stretched and then finally it breaks. The measure of stretching is the percent elongation, defined as the maximum elongation of the section (gauge) length divided by the original section (gauge) length. So, in determining the ductility of a steel type, a wire is stretched until it breaks and the ductility is measured as a percentage of elongation.
Toughness is likewise measured, and can be considered ductility with strength. Toughness testing usually includes impact in testing apparatus, either in the Charpy test or Izod test. Both tests only measure the relative toughness of materials in a very specific application that is not a knife blade! This is important to understand, because knife blades are very specific use items, and are not blocky notched pieces of metal that are typically the form that is tested. In both of these tests, a pendulum is swung into a notched bar, until fracture, and the energy absorbed in the fracture is determined as a ratio of the height and weight of the pendulum as a calculation of initial energy vs. the absorbed energy.
But what does all of this have to do with knife blades Here is the problem: knife blades and the steels used to make them do not fall under one concept, one test, category, or issue. For instance, consider that the overall durability of steels in knife blade performance are determined by these factors of strength alone (from the Machinist's Guide, AISI, SAE, ASTM and ANSI):
- Stress per force of unit area
- unit strain: the amount by which a body changes when subject to a load
- proportional limit: the point on a stress-strain curve at which it begins to deviate from the straight line relationship between stress and strain
- elastic limit: maximum stress to which a test piece is subjected to and will still return to its original length upon release of load
- yield point: the point in a stress-strain curve at which there is sudden increase in strain without an increase in stress
- yield strength: the maximum stress that can be applied without permanent deformation
- ultimate strength (sometimes called tensile strength): maximum stress value obtained on a stress strain curve
- modulus of elasticity: the ratio of unit stress to unit strain within the proportional limit of a material in tension or compression
- modulus of elasticity in shear: the ratio of unit stress to unit strain within the proportional limit of a material in shear
- Poisson's ratio: the ratio of lateral strain to longitudinal strain for a given material subjected to uniform longitudinal stresses within the proportional limit
These are just a few strength forces and considerations. Add to them compressive properties, shear properties, fatigue properties, influence of mean stress on fatigue, cumulative fatigue damage, and many and numerous modes of fatigue failure like low and high cycle fatigue, thermal fatigue, corrosion fatigue, surface or contact fatigue, and combined creep and fatigue which is an interaction not even well understood!
So what does all this have to do with knifemaking and knives in general, focusing on steel types for specific applications After all, most knifemakers are not mechanical engineers, yet work in the very realm where many of these factors are in play.
Toughness and ductility are not the be-all, end-all factors in knife blade construction. Unless you are using a knife as an axe or machete, toughness is usually a secondary consideration to hardness and wear resistance. Most modern high alloy steels can be very hard and very tough, together. Most clients prefer a blade that has a long-lasting cutting edge, not a soft or ductile edge that rolls, bends, or deforms. A softer (and tougher) edge may require more maintenance, and more care and more sharpening while usually being less wear resistant. This is why high alloy steels are used for industrial blades, after all, not lower alloy and more ductile steels. More ductile steels are used for impact-exposed tools like air chisels and economical ball bearings. If lower alloy steels were better performers, we wouldn't even have the high alloy steels!
All the knifemaker can do is make the best choices he can for the specific application, create the best geometry for the blade's intended use, heat treat and process properly for the best hardness-toughness balance, finish the blade to its highest potential, and complete the knife with applicable and sturdy fittings, handle, and accessories.
How does the buyer of the knife determine this Simply by experience and logic. There is no ultimate answer, not miracle steel or treatment, and the maker himself demonstrates his experience in the knives he creates and the people who use them.
Now the really important part of this, directed at the person who is interested in acquiring the very best knife possible: For all these discussions, take some time to look at the track record, history, testimonials, and above all the knives and sheaths and accessories of the maker. Look at his knives. Look them over good. Does the skill and knowledge he expresses in discussing engineering and metallurgy present itself in his works After all, that's what really counts!
For the knifemakers: I've seen discussions online about the relative toughness, strength, and shear or various carbon steels where makers have claimed superiority of these steels to our old favorite reference steel, 440C. Just so you have some numbers to chew on, here are some simple specs that should clear up just exactly what is the toughest steel in this selection (from AISI, ANSI, and other official engineering and metallurgical sources you can reference yourself):
|Steel Type||Fracture Toughness (Max)||Shear Modulus (Max)||Ultimate Tensile Strength (Max)|
|52100||18.7 MPa-m½||80.0 GPa||195,000 PSI|
|1095||18.7 MPa-m½||80.0 GPa||184,000 PSI|
|440C||24.2 MPa-m½||83.9 GPa||286,000 PSI|
For those who claim that these carbon steels are tougher than 440C, this should clear up that misconception.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics Real Counterterrorism Knives Used by Professionals:
More about Counterterrorism Knives
The machining and process that takes place on high alloy steels can be much more arduous, time consuming, and expensive than the process of hand-forging a knife blade, because the high alloy steels are harder to machine, more costly, unforgiving of error, and much more difficult to finish.
The idea: The practice of differential hardening or differential tempering has been very popular in handmade, hand-forged knives in the last decade, though the practice is literally centuries old. The idea behind this practice is a simple one. The cutting edge needs to be hard in order to be wear resistant. The spine of the knife blade needs to be tough so that the blade overall is not brittle. Why not have the best of both worlds by keeping the cutting edge as hard as possible, while having the spine softer, so the knife blade is not brittle
This practice originated a very long time ago, and the reason it came into practice is because earlier, lesser alloy steels were not capable of being both hard and tough, so the knife (or sword) maker had to choose what temper and hardness the blade would benefit from the most. Though there are several ways to produce a differentially hardened (or differentially tempered) blade, I'll spare you the processes and focus on the advantages and disadvantages of this practice, and why it became a popular practice among makers of certain types of knife.
Low alloy carbon steels: It is important to understand why differential hardness needs (or does not need) to be done. On low alloy carbon steels, the steel is not capable of being very hard and wear resistant without being brittle. For instance if the knife is hardened and tempered to 60 Rockwell on the C scale, the knife's cutting edge is very hard and has good wear resistance, and this is great. But, in these low alloy steels, the spine at the same hardness will be very brittle (so, also, is the cutting edge). To have the spine tempered back to 55 HRC would allow the spine to flex a bit, while retaining the hardness at the cutting edge, which is not tempered back.
High alloy tool steels: The first thing to realize is that very modern, high alloy tool steels can be hard, tough, and wear resistant because of the intense carbide structures in the steel, when properly processed. So the choice of steel for the blade is what may dictate why a maker would have differential hardness and a temper line. Clearly, the better high alloy steels do not need differential treatment because of the wide scale of improved properties of the steel due to the alloy itself. If you doubt this, simply research why shear blades, metal dies, valve seats, and ball bearings are made of the better high alloy steels (D2, 440C, ATS-34 and others) and none of them are differentially hardened or tempered in industrial applications. Do you think that these extremely heavy duty, high wear potential applications are neglected by simply omitting the differential process Of course not, these steels are hard and tough and wear resistant through and through and are, by far, superior steels, and that is why they are used. If you think that plain carbon steels that are used to hand-forge knife blades are superior to these high alloy steels, consider that the military, medical, and industrial manufacturing fields do not use these carbon steels because they are inferior, no matter how the heat treatment is performed.
Popularity vs. performance: There is, simply, no way that a plain carbon steel blade can be made to perform as well as a high alloy steel blade. Low alloy steel does not possess the tensile strength, wear resistance, corrosion resistance, and this is easily researched. So why are low alloys popular in some knife circles There are several reasons that these steels (and the differential treatment processes) are still popular. These low alloy steels can be hand-forged in a gas or coal/coke/charcoal furnace, and the knife blades can be shaped and forged in the open atmosphere. So the differential temper line has become synonymous with a hand-forged knife blade. It can be an attractive, artistic, and desirable look for a blade while signifying it as hand-forged. If done properly, it can produce a blade that has a hard cutting edge, but a softer, more flexible spine and this is desirable.
Issues and limitations: There are some issues and limitations with a differentially treated blade. No matter how it is accomplished, the cutting edge is hard, and in being hard, is more brittle than the spine. This can be a problem because the cutting edge, by the very nature of its geometry, is (or should be) thin. So you can visualize a very thin, hard, and somewhat brittle edge that can be easier to break, fracture, or crack. These cracks may be happening on a microscopic scale, and some new research of late has illustrated this on several different alloys which presents as a dull edge. While the maker can control this, there is a limit to how hard a cutting edge can be without being too brittle for reliable service. The maker may opt for a thicker cutting edge, which limits the sharpness of the blade, and severely limits the life expectancy of the knife, as it is not in the knife owner/user's toolkit to regrind a thick blade to achieve a thin and sharp cutting edge angle when sharpening. Another concern is the level of toughness of the spine, or major thickness of the blade. If the spine is too flexible, it can flex and bend, and when it does the brittle edge can crack. So, again, careful attention by the maker must be paid to the balance of the two tempers. The third and probably most troublesome aspect of having a hard edged differentially tempered blade is that eventually, the hardened area will be worn away and used up. This limits the life of the knife overall.
Hand-forged or handmade: The comparison arises when a client wants a superior steel. Though the temper (or hamon) line can be visually identified in a hand-forged knife, this does not exclude the high alloy knife blades from being finely handmade. Unfortunately, lesser educated knife clients equate "hand-forged" with "handmade" and may think that a knife that is not hand-forged is somehow all made by machine. While there are some mass-produced knives that are made by CNC machines, fine knives from well-established makers are almost always made by hand, offhand. The machining and process that takes place on high alloy steels can be much more arduous, time consuming, and expensive than the process of hand-forging a knife blade, because the high alloy steels are harder to machine, more costly, unforgiving of error, and much more difficult to finish.
Differential temper in high alloy steel blades: I've seen knives advertised that claim that they've differentially tempered a 440C stainless steel blade. The reason for this is clear to a professional knife maker: this is a ridiculous advertising ploy created to sell knives and nothing else! These high alloy steels do not benefit from any differential tempering for the many reasons I've clearly and plainly illustrated here. Properly heat treated, they are both hard and tough, and any attempt to claim a blade is somehow superior by differential temper is just an advertising ploy. When you see a knife blade pushed this way, be sure to look at the important things they are distracting you from: overall grind geometry, finish, balance, fit, materials, accessories, and service. I'll guarantee that they are lacking in most if not all of these areas, and hope that you'll be sold on the steel temper alone. Only through education and clarity will these ridiculous wives' tales be limited to the ignorant that foster them because their knives are so poorly built in the first place!
Choice: Ultimately, the choice is up to the knife client. I do not typically hand-forge lesser low alloy plain carbon steels because they are, simply, lesser alloys overall. I've grown beyond hand-forging in an open furnace; I choose to make knives from the very best high alloy modern tool steels made in order to make the best knives possible. If you are a fan of the lesser steels, primitive works, and the style of knife that uses older, dated, and lower alloy steel blades, that's okay. There are many makers who hand forge a decent knife within the limited performance of those chosen alloys. But for my clients, I only offer the very best, most modern, high performance tool steel alloys.
For more information, link to my Heat Treating and Cryogenic Treatment of Knife Blades page.Back to Topics
More about this Horus
I read some interesting views on blade finish on a popular knife bulletin board. Knife makers were talking amongst themselves, discussing the pros and cons of having a hand-rubbed finish on a knife blade. It's funny how the justifications become reasons, how tradition is ignored in the face of what some would call outright ignorance.
From my upcoming book:
I'm a realist. Not every person likes a mirror, or polished, or bright finish; that's fine. I finish my knives a variety of ways, too. I'll simply explain my preferences and reasons for finely finished blades.
Since the dawn of the metal blade, the finest finishes have always been mirror. There are good reasons for this, but one only needs to look to history and tradition to see this illustrated again and again. Metal, no matter the kind, is much more beautiful when brought to a high lustrous polish. Like most finely prized precious gemstones, the brightest, finest, clearest, and most reflective polish brings out the true nature and character of the material. Historically, man has always respected the effort and skill it takes to bring metal, stone, wood, horn, or any other material to a bright finish, and such a finish allows a clear, sometimes even translucent view of the material at it's purest and most revealing.
When an artist or knife maker chooses to leave a material in a roughened state, he usually does it for one of six reasons:
- The textural effect is necessary to convey an artistic concept or pattern. A sculptor may leave a piece of rough stone in his piece to demonstrate the emergence of his finished work from the stark roughness of a raw and beginning material. A jeweler may bead-blast or roughen an area of metal or stone to show some contrast with the rest of a polished finished work, or to make a pattern, theme, or component stand out apart from a finished field.
- Some artists leave materials in a roughened state for economy. A mirror finish on metals, sculptural or utility, add to the expense of the project, no matter how small. Extra machinery, abrasives, compounds, electricity, and expendables are all required to bring blades to a mirror polish. Fine finishing also requires a great deal of time. Time spent on finishing naturally brings the cost of the finished piece up, so the economy of time management may also limit the finish of the piece.
- The material itself can discourage fine finish. Some knife blade materials simply can not be polished to any modicum of realistic beauty. Take the popular steel CPMS30V (S30V). It is not currently possible to reasonably mirror polish this steel. The finish smears, digs, skids and fogs. It is not a good steel for a fine investment knife for this reason.
- The artist may lack skill. It takes a trained, practiced hand to bring a metal to a mirror finish yet still maintain crisp regions of geometric form. Some makers are just not skilled enough to pull off a crisp, clean, mirror finish on hardened tool steel and you can see this in washed-over and rounded grind lines, grind terminations, grind lead-offs, and irregular, wavy, or scratched surfaces when they are not successful.
- Great handwork patience is required. Bringing a knife blade from a ground finish of 180 grit to 2000 grit and a crisp, clear polish multiplies the blade grind work by a factor of ten. Every step of master grinds, control grinds, and finish grinds must accomplish the complete removal of previous grind cuts, marks, and scratches to accomplish a clean mirror polish. Several steps of polishing and buffing on different wheels may be needed, with additional wheels, machines, and compounds.
- Safety is a serious concern to the artist who polishes metal blades. The buffer is the most dangerous machine in the studio, and many makers have been scared away from this high speed machine that can turn a knife into a deadly projectile.
You'll see a ton of excuses and justifications toward the practice or hand-rubbing or sanding a knife blade, ignoring historical perspective and the vast array of methods, abrasives, machinery, and polishes available to the custom knife maker. A prevalent view I've read claims that a hand-rubbed blade looks hand made, and a mirror finished blade looks machine made. This is one of the most ridiculous things I've ever read. What factory knife is mirror finished None that I know of, because factories know that in order to mass finish, the only method to true mirror polish would be tumbling en masse, and the grind lines, corners, and edges of the blade would all be rounded over. This would be instantly noticeable as a poorly constructed piece of washed-over metal, and rejected outright as low value. Some mass-produced jewelry is mass-finished and tumbled but those forms are all washed over and rounded by design and intent. The finest, accurate, crisp forms of knife blades could not be manufactured this way, so they aren't. You simply won't see a true mirror finish on a factory steel blade. Factories do, however, have machinery that imitates the hand-sanding, hand-rubbed appearance of knife blades and this is actually the most dominant finished appearance. Another of late is the painted or coated blade, but that is for another discussion.
The truth is, a fine mirror finish on a knife blade and on most other metallic forms is best achieved by a skilled and knowledgeable craftsman, well-practiced by experience. Simple machinery alone can not produce a fine finish. A machine may be employed to achieve this, but the work and control is all offhand. (In the book, I go into how and why the mirror finish must be made offhand)
Another excuse or justification made by knife makers for the hand-rubbed or hand-sanded finish is utilitarian. They claim that since the blades will eventually be scuffed and scarred by use and insertion in sheaths, textiles, animal flesh, paper and cardboard, or whatever the cutting chore requires, they prefer to start the blades with this finish. The blade is also wiped during cleaning along its length, the same direction as the rubbing, so why not start this way Actually, this is a good argument for a utility knife. If a knife is to be used, it is going to be scarred by that use. But this is only valid on inexpensive utility knives, not fine hand work. The difference of a gracefully aged mirror finished blade that wears the patina and wash of use is much different than hand-sanding the surface to 240 grit and then selling the knife that way. But again, this point is only valid for a utility, low end knife. It does not speak to the maker's skill, only his low-end business practice. Other justifications recited may include a rough or macho look, a rugged appearance, or the look of a tough knife ready for action. Let me get out my 10" rodeo belt buckle...
It must be noted that some materials simply can not be polished within reasonable practice. As I said above, steels like CPMS30V and CPMS90V have so much vanadium carbide that they resist extreme efforts to be brought to a high finish, and are best left sanded, bead blasted, or roughly ground. This fact alone precludes their use as fine investment grade pieces. Some makers, users, and collectors might argue this, but a flat, sanded and poorly finished knife simply looks utilitarian, no matter what extravagant handle material is applied.
I'll add that once or twice a blade pops up that is claimed to be CPMS30V with a mirror polish. One of these is a knife manufacturer who originally offered the knife for about one hundred bucks. Something smelled fishy here, so I did some digging. The knife manufacturer insisted there was no difference between CPMS30V and their designation which was S30V. So was this an attempt to sell a knife under the banner of CPMS30V that was actually another steel The tenacious difficulty of finishing the high vanadium steel to any degree of polish and the relative cheapness of the knife did not make sense. Then the technical person who I spoke to told me it was simply buffed out, then stumbled around words, and finally revealed that the finishing process could not be disclosed. This large and popular American knife company has discontinued the manufacture and sales of this knife, and would not say why.
In another instance, I heard of "old so-and-so" who mirror finished a CPMS30V blade once. Yet when contacted, he would not return calls and was evasive about the process. Could the maker and the manufacturer know some special process that the entire knife making world and industry does not know to simply and very cheaply mirror finish a high vanadium carbide bearing knife blade What do you think And if so, why are their knives not continually made this way The knife manufacturer discontinued the model entirely. The maker supposedly had it on one knife... perhaps they know something I don't. Please remember that the manufacturer of these tool steels plainly and clearly states that they can not be mirror polished. This is not a fault; they are great steels by a great company, but they are intended for plastic injection molding dies, and not originally designed for fine cutlery, no matter what you may read on the internet. If you doubt me, call Crucible Metals Corporation (now Crucible Industries) and talk to one of their fine engineers about the steel properties and finish potential and they'll enlighten you.
It was humorous to read a post on a forum where I was derided for not "naming names" about the suspicious steel identification by the knife manufacturer in the content of this section. The reason I don't do this is because I name NO names of any product that I do not endorse, for any reason, anywhere on this web site, apart from the "Funny Emails pages, where people who write include names of the knives and companies. I believe it is best to give clear examples by description, illustration, and experience with these problems and I do so there. For the anonymous posters and flamers, I'll say that if they can indeed mirror polish these high vanadium steels that even the foundry says can't be polished, I'll ask them to do so, and offer up examples and a clear technical treatise on how they accomplished this. I imagine I'll wait a while on that-
For all the knives that have a sanded finish, the number one reason that most makers hand-sand their blades along their length is lack of the necessary patience and skill to complete a finer finish. They want to get to the handle, the fun part of knife making. They want to get the knife out the door; they don't want to have to do hours of repetitive work where one mistake ruins the blade. (In the book, I go into exactly why this is difficult to pull off) So the string of justifications continue, and I believe that dishonors our history and fine craftsmanship in general.
If you need a very good technical reason for a mirror finish, even in a utility working knife, it's corrosion resistance. All steels benefit from a reduced surface area that is the result of mirror finishing. When a blade is ground or sanded to finer and finer grits, the surface scratches become smaller and smaller, and more and more shallow with each diminishing grit size. The surface of the metal is like a field of furrows, starting out deep and rough, with the surface broken up in hills and valleys, grain exposed like dirt clods in freshly plowed land. You can visualize that a tremendous amount of surface area and roughness is exposed, and the more surface area, the more contact corrosive fluids and oxygen will have with the components in the molecular crystalline structure of the steel. This is like the plowed field's ability to take on water. Now, as the field of steel is finished finer and finer, these rough surfaces, hills, and valleys are reduced considerably. So, then, is the surface area, and more corrosion resistance is obtained. But when brought to the finest mirror finish, something entirely different happens. The act of polishing literally melts the microscopic surface of the steel and blends the smallest furrows and imperfections into one monolithic surface. It's like spreading a layer of clay onto our smoothed dirt field, thus preventing water from penetrating, as it is trapped on the surface. Since the surface area is reduced to a minimum and smoothed, the steel (and every other metal polished this way) is much more resistant to corrosion. Since corrosion is a reaction of oxygen and often a fluid, minimizing the surface area assures the greatest corrosion resistance. The surface, like the surface of our clay field is slick, resistant, and clean. Not so great for the farmer, fantastic for steel and its corrosion resistance.
More about my upcoming book at this link.
Blade finishes are simply the way the surface of the steel is handled. Here's how they break down:
- The Satin Finish (or brushed finish): The simplest finish is to leave the grind marks on at about 240 grit. Sometimes, this is requested by clients who are going to scratch, rip, and scar the blade, and do not want to pay for the effort to finish a blade that's going to be marked up anyway. Some steels, like D2, S30V, 440V and S90V can not be effectively mirror finished, so satin finish is fine. It's the least expensive finish I do.
- The Bead Blasted Finish: This is accomplished by first grinding to 240 grit on the grinds and flats, then glass bead or sand blasting to uniformly rough the surface. This looks great on tactical, combat, or fighting knives where reflection of a shiny blade is unwanted. It also compliments a knife blade that will then be hot blued, for a completely flat black finish. The only drawback is that the texture of the steel surface tends to hold water and debris, and can accelerate corrosion if not cared for. A good property of the bead blasted blade is that it will hold or grip a heavy wax, so that if the blade is waxed regularly, corrosion is kept to a minimum. A satin, sanded, or mirror finished blade does not have as much tooth to hold the wax for a prolonged time. Some steels can not be mirror finished, so this finish applies to them too (see satin finish above)
- The Sanded Finish (also called hand-rubbed): This is very popular among knifemakers, but I seldom do it, and then only by request. Most makers hand-sand blades along their length, and their reasons vary. I've heard that "my buyers expect a sanded blade" and "my sanding is perfectly aligned with the knife" and "I sand to 1200 grit and you can look at my sanding with a microscope and it's perfect." Hmmm. I personally feel that most makers who sand cannot achieve a fine mirror polish, or are not willing to invest the time and effort into a proper high mirror finish. Simply, it's a short, quick way to finish a blade. I'm sure I'll get some angry mail over this comment, but history will bear me out. The finest blades were always mirror finished to the highest degree possible.
- A Mirror Finish is best, for a host of reasons. It's beautiful. High chromium and alloy tool steels can be made to obtain a gorgeous finish, even D2 with its characteristic orange peel appearance is enhanced by mirror finishing. A mirror finished blued blade is stunning. The mirror finish has the highest appeal among most collectors and users. It increases the value of the knife, also the cost as the blade labor is more than doubled (that's probably why most makers just sand their blades). Historically, the mirror finish is found on only the highest valued jewelry, firearms, blades, swords, and armament. A mirror finish doesn't hold debris, water, or corrosives. The blade slides through materials with less effort. And there are some studies that indicate a high polish increases the break resistance of the blade, because all fractures start from a surface imperfection.
What constitutes a good finish Finishing of the blade must be uniform. The grind lines must be preserved, that is clearly and crisply defined on the face of the bade. There must be no waves, gouges, or scratches in the steel that is not part of the design. The grinds must not be washed over, that is: made slightly convex and beaten down by too much time spent on the buffer. Many makers do this, trying to buff away errors in the finish by spending a good 30 minutes on the aggressive buffing wheel.
How I mirror polish is: grind through 10 steps of grinding belts, from 36 grit to 2000 grit, then about two minutes on the buffer cleans up the fogginess and clarifies the finish. The grind lines remain crisp, the value is greater, the look is stunning. I'm known for some of the cleanest grinds in the business, a reputation well earned by years of sweat equity. I'll put my mirror finishes against any other knifemaker's in the world.Back to Topics
More about this Sasserides and Saussure
Often, guys will write insisting on a blade that holds its finish, without scratching. There is an answer for them: it's the collector's knife, a knife that sits in a dust-free display cabinet, separate from its sheath, and never gets handled. The truth is, there is no such thing as a knife blade or sheath arrangement that will not scratch the finish of a blade, if the blade is ever used. A working knife will be inserted and withdrawn a thousand times from its sheath, and if just one speck of sand, dirt, or debris makes its way into the sheath, it will lead to a scratch or group of scratches, scuffs, and scars on the fine metalwork. See the related topic on my Handles Page. This is one of the reasons that some makers sand the knives along their length, to hide the natural wear marks within a pattern of sanding: applicable for low end utility knives, and it's a matter of preference.
Scratches on metal knife blades are the same as the scratches on a firearm that is withdrawn and inserted into its holster. Men have tried for centuries to limit this. Here are some of their attempts:
- Lining the sheaths with soft materials. Those materials will eventually separate from the sheath body and can actually attract and hold debris
- Constructing sheaths from soft materials. Bad idea, because not only can those materials hold contaminates and debris, but they may flex, allowing the blade to poke through... ouch!
- Leaving gap or play in the sheath for limited blade contact. Also not good, as the knife rattles in a loose sheath, and can fall out.
- Making knife components out of harder materials. This is a good thing for gemstone handles, as little scratches them, but no blade or fitting material can withstand sand, dirt, or contaminates completely. Sand is made of quartz, which is as hard as any knife blade, so will scratch it.
- Constant polishing. I know of makers who bring small buffers to their hotel rooms at shows to clean up their knives for sale. No client or knife user is going to bother with this.
- Lubricating with oils, waxes, and coatings. This won't help. In the case of oils, they will actually attract and hold debris, and might soften cements, materials, and adhesives in the sheath or knife. Waxes are fine, but their effects are limited. Painting or coating a blade is a cheap finishing process that should never be done on any knife. See my reasons at the next topic below.
Want to preserve your knife forever I recommend a coat of Cosmolene® on the blade, wrap the knife in wax paper, and store it in a temperature and humidity controlled safe. It will be the ultimate "safe queen," and the envy of your working knives, tools, firearms, and the rest of your active life. Or you could just sand the blade along its length with 220 grit silicon carbide paper, and it will look like every other piece of cheap knife work out there... I'm kidding, of course.
What to do
If the knife is a collector's piece, and you are interested in maintaining its value, just like a fine firearm, you'll want to limit its use and exposure, even to its own sheath. Keep it clean and dry and occasionally waxed with a museum quality microcrystalline wax.
If it's a working knife, expect some scratches and abrasions from use. Do your best, within reason, to keep the knife clean and dry, wax it occasionally, and be proud that you can afford to use a well-made knife.
In either case, never store the knife long-term in any sheath! See my Care of your Custom Knife page for more details.
Care of the knife includes the handle. By the way, the most scratch resistant material is gemstone, here's a link to details about the handle, bolster and guard.Back to Topics
More about this Argiope
New! While I'm not hot-bluing stainless steel blades, I've developed a new process for stainless steel counterterrorism knives in my "Shadow" line that creates a subdued, dark, and variable finish for non-reflectivity!
For the same reason that you don't paint a ladder, I do not coat blades, because that would hide any potential flaws, imperfections, or cracks, and any coating would eventually chip and peel. Coatings also have the potential to accelerate corrosion, because moisture, corrosive fluids, and debris may be trapped between the coating and the blade, and if the blade cannot breathe, dry out, and be cleaned, it will corrode. All fine tool steels (even high chromium stainless tool steels) can rust if stored in an enclosed environment (including the sheath) because there is no truly corrosion proof tool steel. Eventually, all coatings will become nicked or scratched or, at the very least, be exposed to an opening at the cutting edge. Coatings are typically the sign of a cheap factory knife, as it is a very fast and inexpensive way to finish the blade. Spray it, bake it, and out the door it goes. I talk about that more on my FAQ page.
I do, however, perform professional hot bluing on blades. Bluing is a process of oxidizing (rust is a form of oxidation, uncontrolled and irregular). Hot bluing (which is what I do) is a controlled, deep passive oxidation process whereby the steel is cleaned thoroughly, chemically and molecularly, then immersed in a superheated boiling solution of sodium nitrate and other proprietary salts for 40 minutes or longer. This oxidizes a significant depth of the steel surface. The bluing process is the same used on all fine firearms, that black dark deep patina that takes years to buff, scrape, or polish off. My process excels in penetration; where most firearms might be blued for 10-20 minutes, I start at 40 and blue for up to 60 minutes, giving the deepest blue possible. To give you an illustration, when I cut my makers mark into a blued blade using a diamond point engraver at 50 pounds per square inch, it takes three full passes to cut through the bluing to achieve a bright cut!
Another important feature of bluing is glare reduction. While this is very important on firearms, it also plays a role in knife blades, particularly combat knife blades. Though glare reduction can be accomplished somewhat by bead-blasting a stainless steel surface, the ultimate in a flat-black, non-reflective surface is hot-bluing a bead blasted knife blade.
To sum, hot caustic bluing is a well-recognized, time-proven method of inhibiting corrosion (not eliminating it) on the surface of carbon steels. My own son (in the 101st Airborne) has carried a hot blued skeletonized knife in combat in Iraq. So did his squad. They're very happy with the performance. I've had many blued knives in the field of combat, in the hands of hunters, and in fine collections for years without complaint.
Another form of treatment to inhibit corrosion on steel is Parkerizing. I get asked about this from time to time, but there is very little interest in it in the knife world. I believe this is due to several reasons. Though the Parkerizing process is simple and fairly inexpensive, and well within the reach of the process in the modern knife shop, one must first question why someone would want to Parkerize a knife blade in the first place. Parkerizing is mainly used on firearms, as a way to inhibit corrosion while creating a rough surface. Similar to bluing, a passive surface is created, not a passive oxide (like bluing) but with zinc and manganese phosphates and sometimes other metallic elements. The surface initially appears gray, but then over the years converts to a greenish gray seen on old firearms. For maximum corrosion resistance, the Parkerized surface is often coated with epoxies or molybdenum coatings and protectants. Having read the paragraph on coatings above, you know why this particular step is a bad idea for a knife.
So, what you get when you Parkerize a blade is a gray blade that inhibits corrosion better than the bare steel, and slightly better than blued steel, but a surface that still has to be oiled, waxed and kept dry, just like a blued surface. And after a while, the blade will turn greenish. Why would one want to do this A much better solution is to start with a modern, high alloy stainless steel which, in essence, has the corrosion protection built in to the steel itself. It will appear gray also, and stay that way through decades and decades of use. It has higher corrosion resistance than any Parkerized steel, and, with the right choice, heat treating and tempering, and blade construction, will have higher performance characteristics than plain carbon or low alloy steels that are Parkerized. Sure, I could Parkerize O1, just like I blue O1, but what would be the advantage If a client wants a gray steel surface and high corrosion resistance, I would simply recommend one of the high alloy stainless steels for his blade.
Bluing vs. Parkerizing on the Handmade Knife Blade
|Bluing and Parkerizing|
|Color||Black, Vermillion, Cobalt, Straw||Gray, turning gray-green|
|Process||Conversion Coating||Conversion Coating|
|Chemistry||Iron Oxide||Zinc Phosphates|
|Corrosion Resistance||Inhibits||Inhibits slightly better than bluing|
|Environmental Dangers||Simple Salts||Phosphate Accumulation|
|Future||Here to Stay||Being phased out|
The significant features of bluing are the color and the corrosion inhibition. Jet black surfaces, peacock, vermillion, light and dark straw: all of these are possible with hot bluing. With Parkerizing, you get a gray surface that turns a weird-looking shade of greenish after some years. An important note is that Parkerizing seems to be on the way out. Since Parkerizing uses phosphates, and phosphates are accumulating in our environment, there is significant movement to limit these chemicals. There are better and newer surface treatments for all ferrous metals, but bluing is a very old process that is here to stay.
Here's an email from a client who carried a bead-blasted and hot-blued knife in combat:
That Grim Reaper knife made it through two year long rotations to Iraq. It is well made and the heat, sandstorms, and all that chaos that Iraq could throw at it did not phase it one bit. Thank you.
Very Respectfully, R. M.
More about this knife Back to Topics
People that work with machine tools soon realize that the new coatings, Titanium Nitride (TiN), Titanium Carbonitride (TiCN), Titanium Aluminum Oxide (TiAlN), Steam Oxide, and Hard Chrome coating Diamond-Like-Carbon (DLC), each have beneficial applications in the machine trades. Since these coatings are so good, why aren't they on knife blades
Most machine tool coatings are applied to high speed steels, cermets, or carbides, at the cutting faces that cut other metals. That's because they are expected to have great cutting loads (on other metals) at high surface feet per minute speeds. The coatings help lubricity, prevent galling, and increase wear resistance, usually at high temperatures. In a knife, these kind of stresses are never encountered. Exactly how many SFPM can a person move a knife blade anyway And they're applied for metal to metal cutting, rarely encountered on a knife blade. These same high speed steels, cermets, and carbides are also very brittle at high hardness. Toughness is more important in a knife blade, as it is expected to encounter substantial shock loads with a small cross sectional area to back them up. Usually, machine tool cutters (mills, drills, inserts) have a lot of meat (thick body of metal) in their core to support these loads. We aren't offered that opportunity in a knife blade, which must remain thin for carry, use, and reasonable sharpening. And probably the most important argument is that the instant a knife blade is sharpened (and it will have to be sharpened), the coating is gone from the microscopic cutting edge, where you would need it in the first place.
I've seen tactical knives with a hard chrome coating for "abrasion and corrosion resistance." Called electroplating, plating, hard chrome, fused coatings, or other descriptive terms, it is simply the process of electroplating a different metal on the base metal using a metal salt bath, an anode, and electricity. This same process is how a bumper is chrome plated. The reason for chrome plating (on a bumper) is to inhibit corrosion on the steel beneath the plating, because without it, the steel would rust away. We all know that this is fine until one tiny scratch allows moisture to contact the steel, and then the plating blisters and peels away, as the rust underneath the steel flares up like uncontrolled teenage acne.
On a knife blade, chrome plating is generally accepted as existing on the cheapest, most poorly made blades available from foreign sweat shops. This is due to another reason, the reason that knife blades would be chrome plated in the first place. Chromium plating has a great affinity to fill in voids, irregularities, pockets, scratches, inclusions and scars in the base metal. This means that the knife blade does not need to be finished, just roughly sanded, and the chrome will fill in the rest with its reflective and even beauty. This sounds like a knife blade finishing shortcut, designed just for the maker or manufacturer who wants to quickly get the knife out the door without all that troublesome finishing that is so difficult and time consuming. Instant beauty, right Sounds good, no
No, does not sound good, and here is why. First, if a knife blade needs chrome plating to protect it (or paints or other coatings) then it is the wrong material for the job. Rather than purchase a more expensive steel that is naturally resistant to corrosion, the plating is supposed to protect the lesser steel from the environment and exposures. Remember that the instant the knife is sharpened (before it ever leaves the maker's or factory shop floor) the chrome plating is abraded away, leaving the bare steel cutting edge and relief open to all of the corrosive exposure it can bear. The blade may look chromed and shiny for a while, but the cutting edge will be rusty and dull. And by dull, I don't mean just the surface finish. I mean that the cutting edge will dull as it corrodes away because the steel choice was not suitable for use in the first place, and that is why it is chrome plated!
You might read that a special chrome plating is used, typically called "hard chrome" in the machine tool trade. This is not quite the same as chrome plating of a bumper, as it's an industrial process made to increase the wear resistance of the surface of a metal. The plating is very, very thin, on the order of less than a thousandth, perhaps a ten-thousandth or hundred thousandth of an inch thick. While it is extremely hard, one might question why you would want this kind of hardness plated on a knife blade. Since the cutting edge is worn away immediately and continually, this chrome plating does not protect or harden the very edge, where hardness is critical, only the surface coating of the blade. So, I suppose the blade would be resistant to the rubbing of the knife sheath against the sides... but it is of no help to the actual cutting edge. Meanwhile, just as with other coatings, any infiltration of moisture or contaminants is a serious problem.
In the last decade, diamond-like coatings (DLC) have been applied to knife blades, and then touted for their great advantages. But these advantages are for the manufacturer, not the knife owner or user, and here is why:
- The DLC coating is applied to the blade surface, and will not be on the cutting edge. The cutting edge is where a hard, diamond containing coating would supposedly do the best job, aiding in wear resistance. But the second the knife is sharpened (typically before it leaves the factory) the coating is gone. No advantage whatever here.
- The coating is on the blade for cosmetic reasons only. This is of advantage to the manufacturer only; he'll claim this is what the "pros" use, this is the "stealthy appearance," "hot style," "aesthetic," and "utilitarian" appeal, but this is all advertising hype and bunk. Most of these coatings are spray and bake or vapor deposition, and done by automation, and are a shortcut to the most labor intensive and costly part of making a knife blade, the finish. By simply coating the blade, they bypass all of the labor and skill required to finish the blade, and out the door it goes with a bunch of compelling adjectives dreamed up by the advertising department to make the buyer think he's getting more than a shortcut.
- The worst part is that these coatings can actually accelerate corrosion on a knife blade. Moisture and contaminants can be trapped beneath or initiated on a scratch or border of the coating. Because stainless steels rely upon a passive oxide surface for corrosion resistance, this passive surface exists the instant the stainless steel contacts atmosphere. Since atmosphere is limited or inhibited in coated items, like the chrome plated bumper above, corrosion can take place beneath the coating, at the coatings edges, precisely where the knife is sharpened, at the cutting edge, precisely where it's exposed to the most contaminants, alkali, or acidic contact. This means that coating a blade may actually make it more apt to corrode!
Remember that the reason manufacturers coat knives is to cut their costs and not finish the steel, no matter what they claim. It's about color, cheapness, economy, and mass-marketing, not about quality.
Don't get me wrong, I love TiN and TiCN on my mills, HSS taps, cermet inserts and carbide tools for my lathes, drills, and mills (hard chrome plating is not even hard enough for them). But on a knife it is a ridiculous gimmick, and an increased expense to clients. It's more important to have a proper selection of tool steel type for the application, proper grind geometry for the intended use, and proper heat treat of the blade steel in the process of making a fine, reliable, modern hand knife that has great toughness, hardness, and wear resistance as well as a fine finish.
For discussion about bluing and Parkerizing, please see the previous topic just above.
Please help to stop wives' tales, knife myths, and misconceptions in our trade through education.Back to Topics
More about this Anzu
Serrations or rip teeth are put on knives to tear through hard or other materials that are more effectively sawn than cut. Hard plastics, hard wood, some lines, bone, textiles, or synthetics may be more easily attacked by teeth than a fine blade. When I started making blades for the military, they requested serrations that work, unlike many found on factory knives. I believe that serrations must be sharp, at the points and in the hollows, and I use a diamond grinder to form, shape and sharpen them after heat treating. A couple things to consider about serrations:
- They subtract overall cutting edge length of the knife. If your knife has a 6" blade, perhaps a 5.5" cutting edge, and you decide on 2" of serrations, you're left with a 3.5" knife blade. On shorter blades, this is very noticeable.
- Serrations make a knife harder to insert and remove from a sheath. Careful design cannot always help, and you might find your sheath welts ripped up from the teeth over a period of time. Learn more about sheaths.
- Serrations may be hard to sharpen. They often are. I use special equipment (diamond abrasive based cutters) to make them and hone them, and that same equipment is not available in the field. Also, each type of tooth is different, and requires its own sharpening regime.
- The teeth may break off, because sharp teeth must be thin teeth. One of the military requirements I've had is to make a tooth that will keep cutting even after broken. This means a initial thinner cross section, and a more aggressive tooth.
- The serrations may hang up when you don't want them to. You may be using your regular cutting edge, and have material you're cutting fall into the serrated part of the blade, hanging up or snagging unexpectedly, and perhaps ripping up a clean cut or causing hesitation that is undesired. A finer serration, or specially designed serration may reduce hanging and tearing.
- Because serrations require brute force to rip, most of them should be called rip teeth, and are usually placed near the ricasso, not at the end of the blade. That way, more force and the heavier cross sectional geometry of the blade will support their use. If serrations are put near the blade tip, it's possible that when they snag, the force of the hand with the leverage of the blade length may offer enough force to snap of the tip of the blade, the weakest part of every knife. Sometimes, in specialized knives, serrations are located on the top edge.
- All detriments noted, rip teeth when used should be very aggressive, not just a "steak knife" type of file cuts to decorate the blade. I've had very positive comments on my tactical and combat rip teeth and serrations. In the chef's field, I've had fantastic results with my hand-carved "theatre-curtain" type bread-cutting serrations.
Learn much more about serrations on fine handmade custom knives, what styles are used, how to use them, maintenance and sharpening, tools used in sharpening, and more than you probably need to know on a special page on serrations on the site here.Back to Topics
Line cutters and gut hooks look similar; they're both deeply scalloped narrow grinds that create a cutting edge inside the profile of the blade. The gut hook is used to slice through the skin of a game animal (gutting) without piercing the internal organs (which can contaminate the meat). The line cutter is used to snag, trap, and slice small line and monofilament with one hand. Here's an email answer I gave to someone who thought the two looked similar:
I agree that the line cutter looks like a gut hook; they're both similar in design. The difference is that a gut hook must have a blunt distal area (or be out on the end of the blade) so that the blade does not slice through the organs. You can see how this particular knife could not work that way. A line cutter is something that I started doing for my military and rescue clients.
When you have to cut stubborn line, ordinarily you have to have both hands free: one to hold the line, the other to hold the knife. In wet, windy, or tough environments, the line can just be passed down your arm and hand to meet the blade line cutter which snags it and cuts it in one operation... with one hand. It works well with monofilament, synthetics, and even spectra. I've even added this simple feature on rescue and dive knives, because those guys are always running into line in or near the water.
Below is picture of "Flamesteed," a specialized CSAR knife with a line cutter.
Learn much more about line cutters and other specialty features on fine handmade custom knives, what styles are used, how to use them, maintenance and sharpening, tools used in sharpening, and more than you probably need to know on a special page on serrations on the site here.Back to Topics
More about this Flamesteed
Millwork refers to any cuts on or through the blade that is done by milling, which includes drilling holes in blades, bolsters or handle areas of the knife. There are several reasons for this practice.
- Weight reduction and balance: to reduce mass in areas of the knife where the strength of the blade won't be compromised. If a knife design contains a large portion of particularly thick and heavy spine, the knife may be "blade heavy," and feel out of balance. Milling and drilling in this area removes material, and if machined correctly with proper stress reduction in heat treating, conserves strength in the spine. Example.
- Embellishment: sometimes weight reduction may work with a decorative motif, and often this motif may extend into other parts of the knife such as pin arrangement in the handle or filework and edgework. Sometimes the milling is followed by hand filework for a fully carved effect. Example.
- Attachment holes: Milling of slots and holes through bolsters and the blade allow for the attachment of rings, thongs, or lanyards for security and accessories. Example.
- Vacuum breakers: To break the vacuum (really surface tension) when cutting wet material like food, so that it won't stick to the blade. Example.
- Finger rings: Example. For extra security, usually in tactical or combat knives, an arrangement of one or more finger rings is milled in the handle. The edges are dressed for comfort, and sized for easy insertion and removal. The largest finger or thumb is usually well under one inch in diameter, so one inch seems to be a good, comfortable size. Knife users have mixed feelings about finger rings, as the rings could remove a finger if the blade was somehow ripped from the hand. My view is that in tactical knives you do not want the knife to leave the hand, period, and if it did, it might end up in the enemy's hand. I can see no circumstance other than having the knife blade trapped in heavy mechanical equipment where this might be a problem. And if you have to hang your weigh by the knife blade, things have gone to hell already, and perhaps you'd better hang on! I assume no liability for finger rings, after all, these are edged weapons and tools. See great examples on my Military Combat and Tactical knives page.
- Mechanical slots: These are necessary in mechanical knives such as folding knives, drop blades, and slip blades where the shape of the milling is designed into the blade arrangement for movement, locking, and accessory use. Example.
- Cannelures or Fullers: These are milled areas usually found in the spine of blades, particularly swords and long daggers. Their purpose is to remove excess weight from the blade while preserving strength. They are not "Blood Grooves" as most Americans call them. The milling makes an "I beam" type of cross section in the blade, which limits lateral flexion (the side to side bending of a flat blade) while reducing overall weight in heavy or long blades. Example.
- Sinister uses: In the days of old, milled cuts and drilled holes in the blade were used to hold poisons of the time, causing infections and suffering to those cut by the blades. I do not recommend this practice... ordinarily. Example.
- Skeletonized Blades: Blades can be skeletonized in the handle and sometimes extending into the blade. This is a milling procedure that removes a substantial portion of the typically heavy tang to achieve a lighter overall weight and improved blade-to-handle balance. Example. There is so much to this style of knife that I created a special page on Skeletonized Knives.
I offer all milled options in a blade. If it can be done, I've got the skills and equipment to do it. Milled slots with fileworked edges, complex crosses, waving curved designs through the blade, carving, geometric arrangements, and precision attachment holes: all these are available. Since I am responsible for all stress relieving, heat treating, hardening, and tempering, I'll make sure the milled angles, corners, edges, and shapes do not cause stress risers in the tool steel.Back to Topics
The blade of the knife is not just the cutting part; it also comprises the tang. Not too many people think about the tang, after all, the tang is just something to hold the colorful or interesting handle, right No, the tang is not simply a a holder to keep the handle pieces attached, though this is often how it is seen by manufacturers, and some individual makers of supposedly fine handmade knives. It's about overall quality.
To gain a deeper understanding of the tang, consider instead that it is the backbone of the knife, the mass of metal that allows force to be applied to the blade, regulated by the balance of the taper. Once you understand this concept, you'll have an advanced understanding of the tang and how it all works to create a good knife with substantial durability, longevity, and value. The truth is, the tang is extremely important.
In the application of forces, one type of tang is king: the full tang. No matter what you may read in other sources, forums, bulletin boards, discussions, web sites or sales brochures, it is crystal clear that the strongest tang is one that is a full piece of metal that is part of the overall blade. The knife blade then, comprises the whole in uninterrupted, comprehensive form and structure: from the tip of the point to the end of the butt. While I do use hidden tangs in some cases, if ultimate strength is needed, a full tang is the obvious bet.
You might think that just grinding a hollow, taper, or bevel for the cutting edge on the working end of the blade, while leaving the tang at full thickness beneath the handle scales is enough. Looking at what is offered out there from other makers, you might think that tapered tangs are somehow not necessary, or have fallen out of favor in the knife world; far from it. The reason you don't see tapered tangs very often is that they are difficult to execute. As in so many decisions made by the knife maker or manufacturer, the decision to leave a knife at full tang thickness is most often one of economy and lack of skill, and not because of any advantage to the owner. Quite the opposite; a thick, full tang is not necessary; it adds extra weight and mass, adversely affecting the overall balance of the knife, and signifies lack of skill or lack of care in the construction of a full tang knife.
Correctly tapering a tang is a challenge to new or unskilled knife makers, and even some who are older in this business have never learned how to properly taper a tang, so they just don't do it. When a knife collector or a professional knife user who knows his stuff looks over a knife and sees a full, flat tang beneath the handle scales, he usually frowns. This is because these guys know how important it is to have overall balance in the knife as well as a neat, well-considered execution and understanding of the process of making a fine knife.
The reasons for tapering the tang are several:
- Weight: One of the largest contributors to a handle-heavy or out-of-balance knife is the tang weight. To reduce the overall weight of the handle, the tang is tapered, and is thinnest at the butt of the handle. This does not affect the strength of the handle-to-blade junction because, typically, full thickness is not needed or necessary at the butt, since there are usually minimal forces applied there. The tang nearest the blade is fully thick, so forces can be applied along the spine flats of the blade and ultimately transferred to the cutting edge.
- Balance: A tapered tang allows more generous fittings to be attached to the knife handle. This means that bolsters can be more substantial, more useful, with significant finger quillons and lanyard holes, and reinforcement for talons, persuaders, and other more unusual features. By having a tapered tang, a large and heavy rear bolster can be used on the knife, making the butt of the knife stronger overall! Careful planning is needed to insure enough thickness of the tang to support these refinements, and that is the responsibility of the maker. Conversely, if the knife is left with full tang thickness, and a large rear bolster is used, the handle will be overly heavy, thick, blocky, and out of balance.
- Appearance: The appearance of a tapered tang is distinctive and significant. It instantly signifies the knife as handmade, particularly if fine filework is applied along the tapered tang. This is because while it may be possible for manufacturers to taper a tang, they rarely do, as it is an added expense. File-working that tapered, slender surface and continuing a valid and well-executed pattern takes skilled hands, and this is never done on any factory knife. The appearance is graceful and clean, taking away the squared-off plainness of manufactured or lesser works. Simply put, finer knives are expected to have tapered tangs.
When are full tangs not tapered There is a place for this too, and it should be clear who is doing this for a reason, and who is doing it to save a buck in the process.
- Skeletonized knives: These are knives that do not have any handle materials, bolsters, or pins. The tangs are left at full thickness while the interior is milled, carved, hollowed, drilled, or otherwise freed of excess material to lighten the tang. Skeletonized knives then focus the mass of the tang as the handle substance. Tapering these tangs would lead to a thin and uncomfortable grip. Typically, these are thicker tangs, since there is not handle material to fill the palm of the hand. While most of these are made to offer a lighter, thinner overall low profile knife for working or tactical use, they can also extend into the realm of collectors works. Some may have inlaid handle materials, but none have bolsters.
- Very large, heavy blades: in knives like substantial khukris, large combat weapons and field tools, a full thickness tang may be applicable because added weight is needed in the handle. Though rare, this sometimes is necessary because without it, the knife or tool is so blade-heavy that it feels unwieldy. There are still balance issues to consider, because a knife that large with a full thickness tang can be overly heavy. The knife owner senses dread rather than pleasure in putting the knife in his hand, and this is a bad sign. Again, careful consideration is applied here. This should only be seen on knives that have a blade length of over 12".
- Reinforcement: in rare cases, the butt of the handle requires extra mass, weight, and substance to support a striking area, a bolster feature, or additional cutting or striking tool or feature. This is not often seen because too weighty of a handle will undoubtedly result in an out-of-balance knife.
Now it should be clear what constitutes the strongest handle tang arrangement, and why skilled makers taper knife handle tangs and unskilled makers and manufacturers do not. If you are a knife enthusiast, collector, or user, be sure and give that tang a good, hard look; it's the backbone of the knife with the refinement of balance.Back to Topics
More about this Deneb
Filework probably started as a way to stop the thumb or fingers from slipping on a slick spine of a knife blade. It has evolved into a highly decorative art form, sometimes even embraced with engraving and precious metal inlays, differential anodizing, finishing, and bluing. The edge of the spine is its own canvas, and it seems every knife begs for its own style or pattern. The filework on one blade may take from one to eight hours to complete, each cut performed while bent over a filework vise with proper magnifier.
Filework and edgework personalizes a knife, is an absolute indicator that the knife is uniquely hand and custom made, and still functions to stop the hand or fingers from slipping on a slick spine. No factory knife will ever imitate fine filework. This particular skill, working on a curved surface down a tapered, narrowing tang can only be achieved by a skilled hand.
What to look for: Crisp clean design, not washed over by too much buffing. Regular, punctuated spacing, a nice design concept. Cuts on both sides matching. Depths of cuts matching. Advanced filework is graduated, that is, it gets smaller in size and spacing as the tapered tang gets smaller in width. Filework does not regularly extend deep into the grind at the tip, as this would weaken the tip of the point.
I keep a pattern book of my most favorite designs, and I offer three lengths of filework:
- Blade only: just the spine from the tip to the ricasso. Where the thumb or forefinger can get some purchase on the blade.
- Spine only: from the tip to the butt of the handle, top only
- Full: from the tip to the choil, all the way down the blade, around the tang, and ending in an often sculpted choil
Read more about filework, with some fine pictures on the Embellishment page.Back to Topics
More about this Kadi
Have you visited the Knife Anatomy page How about the page on Handles, Bolsters, and Fittings Don't forget the page on Sheaths, too! For highly detailed critical information on real combat knives, visit the Tactical Combat Knives page.
And please remember this:Look, there are many good knife steels out there. When sites and discussions go on and on about steel types and properties, ad nauseam, they are often ignoring balance, fit, finish, geometry, accessories, service, and design. Don't get distracted by steel property details! The steel is just the start of the knife, not the whole. If it were, every knife maker in the world would be out of business, not buried in orders and very expensive projects. When you see this type of site, ask to see their knives Hitman Absolution PC SKIDROW That will tell you a lot! Back to Topics
More about this Astarion
Adobe CS6 Keygen ActivatorSerial NumberActivation . ADOBE INDESIGN CS6 ActivatorAll your creative tools in one place Creative Cloud includes the entire collection of creative apps for desktop, from favorites like Adobe Photoshop and Illustrator ., CS5 Download torrent CS6 Download torrent CC .,bazaar()
Fonts - softmaker.com 5000 Professional FontsinfiniType 4. 7,444 first-class fonts for professional users for Apple Mac, Windows and Linux. The font library infiniType 4 is the smart alternative for everyone who .,Daily deals for creative professionals. Get amazing limited time offers.,Результаты поиска
Rick Astley - Never Gonna Give You Up Video - YouTube Facebook hack tool v1.0 very rare toolsРезультаты поиска,The latest version of the classic puzzle game embraces virtual reality too.,SECNAV DON CIO • 1000 Navy Pentagon Washington, DC 20350-1000. This is an official U.S. Navy website (DoD Resource Locator 45376) sponsored by the Department of the .